Hanger Pipe Clamps,Pipe Support,Conduit Clamps,Angle Strut Bracket SUZHOU METAL (BIM) TECHNOLOGY CO., LTD , https://www.szbimmetal.com
Technical parameter:
Details
Â
Snail  Horn
Voltage: (V)
12
Current: (A)
≤4A
Frequency: (Hz)
H=500±30   L=400±30
Â
105dB-118dB
Diameter: (mm)
ø80
Applicable for cars
Universal
Certified
ISO/TS16949
Remarks:
1. It can be designed with other cars exclusive
2. It is very popular in America, Middle East and Europe (best quality)
3.It's our best quality car horn.It has at least twice life time than ordinary horn(Patent).
4.Sound crisp eleganceLong life,high reliableAnti-jam,SUPER WATER-PROOF(Patent)
14 months warranty, good after service, delivery on time
For more details, please feel free to contact me!
Features:
1.The real test in our laboraroy that show to us the horn can get 110db at least.
2.Super long surround sound,it make the sound powerful and comfortable so that decrease the trafficaccident.
3.We used the imported high quality manganese steel to make the soundboad so that can make the fullest possible "BABA~~" sound.
4.We use the most advanced Teflon coat technology.I can be dust-proof and water-proof effectively(We must inform you that there are not have any horn factory can make a universal horn that all waterproof).It prolong the lifetime of the horn effectively.
5.We used the 100%ABS material to make the horn bulb.It has very good Heat resistance,impact resistance,anti-corrosion so that can prevent the dinas and the heat of the engine damage for the horn.Anyway,it also has high hardness characteristic.It can drop from 1Â meter that is not easy to break.
What should IÂ note when IÂ am Installing and using?
a. Snail down or 45 degree Angle installation, Prevent water  into coiled directly
b. If you are not special peason , dont change the angle degree of Steel Support,or it will change the Original air gap
c. mounting torque of Steel support is between 6Nm to 11Nm.
d. The horn support should be mounted to Solid surface to avoid resonance.
e. In order to avoid contact with other parts of the car,The horn should be connected with horn support and installed to wide and Ventilated place.
f. Nonpolarity requirements for this product, the connected place of the wire should solid enough, Double horn should installed on solid part of car body in parallel way.
g. Keep away from car motor and much Radiation place. Not be too low mounting.
h. Don't keep the horn on for 60 seconds, or it will lead to the coil burned down.
i. Using copper wire, more than 1.5mm for wire Diameter, the wire length should less than 4m.
j. Standard mounting Voltage, input working current more than 30A,12V horn voltage: 9-14.5VÂ Â
Our company is a professional manufacturer and exporter that is concerned with the design , development and production of auto parts , we are
fully committed to producing technologically advanced auto parts.
Contact us:
Guangzhou Jindong Electronic Technology Co.,LTDÂ
Add: No.1,Gudong Industrial Zone,Gulong Road,ShawanTownship,Panyu District,Guangzhou
Benki Huang
Tel:+86-020-34738085Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Mob:+86-13922729780
Fax:+86-020-84737552Â
Â
Â
                                        Â
Â
Â
Technical parameter:
Details
Â
Snail  Horn
Voltage: (V)
12
Current: (A)
≤4A
Frequency: (Hz)
H=500±30   L=400±30
Â
105dB-118dB
Diameter: (mm)
ø80
Applicable for cars
Universal
Certified
ISO/TS16949
Remarks:
1. It can be designed with other cars exclusive
2. It is very popular in America, Middle East and Europe (best quality)
3.It's our best quality car horn.It has at least twice life time than ordinary horn(Patent).
4.Sound crisp eleganceLong life,high reliableAnti-jam,SUPER WATER-PROOF(Patent)
14 months warranty, good after service, delivery on time
For more details, please feel free to contact me!
Features:
1.The real test in our laboraroy that show to us the horn can get 110db at least.
2.Super long surround sound,it make the sound powerful and comfortable so that decrease the trafficaccident.
3.We used the imported high quality manganese steel to make the soundboad so that can make the fullest possible "BABA~~" sound.
4.We use the most advanced Teflon coat technology.I can be dust-proof and water-proof effectively(We must inform you that there are not have any horn factory can make a universal horn that all waterproof).It prolong the lifetime of the horn effectively.
5.We used the 100%ABS material to make the horn bulb.It has very good Heat resistance,impact resistance,anti-corrosion so that can prevent the dinas and the heat of the engine damage for the horn.Anyway,it also has high hardness characteristic.It can drop from 1Â meter that is not easy to break.
What should IÂ note when IÂ am Installing and using?
a. Snail down or 45 degree Angle installation, Prevent water  into coiled directly
b. If you are not special peason , dont change the angle degree of Steel Support,or it will change the Original air gap
c. mounting torque of Steel support is between 6Nm to 11Nm.
d. The horn support should be mounted to Solid surface to avoid resonance.
e. In order to avoid contact with other parts of the car,The horn should be connected with horn support and installed to wide and Ventilated place.
f. Nonpolarity requirements for this product, the connected place of the wire should solid enough, Double horn should installed on solid part of car body in parallel way.
g. Keep away from car motor and much Radiation place. Not be too low mounting.
h. Don't keep the horn on for 60 seconds, or it will lead to the coil burned down.
i. Using copper wire, more than 1.5mm for wire Diameter, the wire length should less than 4m.
j. Standard mounting Voltage, input working current more than 30A,12V horn voltage: 9-14.5VÂ Â
Our company is a professional manufacturer and exporter that is concerned with the design , development and production of auto parts , we are
fully committed to producing technologically advanced auto parts.
Contact us:
Guangzhou Jindong Electronic Technology Co.,LTDÂ
Add: No.1,Gudong Industrial Zone,Gulong Road,ShawanTownship,Panyu District,Guangzhou
Benki Huang
Tel:+86-020-34738085Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Mob:+86-13922729780
Fax:+86-020-84737552Â
Â
Â
                                        Â
Â
Â
1 Pair DC 12V 115dB 5A Tone Loud Car Horn 8 Sounds Air Snail Horn Boat Motor Car Truck SUV Motorcycle Accessories High Quality
Model NO.: JD. HL-160
Connection Mode: Double Wire
Current: 4A
Contact Point: With Contact Point
Energy Exchanging Mechanism: Electrical
Horn Base Material and Thickness: 1.0mm Iron
Use Life: 150, 000times
Click Material: Manganese Steel
Horn Color: Black
Warranty: 24 Month
Car Make: Universal
Certificates: E-MARK, CCC, Ts/ISO16949:2009
Diameter: 80mm
Sound Level: 105-118dB
Frequency: 400Hz~500Hz
Trademark: FHL
Transport Package: 1set/Steel Box; 20set/Carton
Specification: 50.5*27.5*21.5cm
Origin: Guangzhou, China
HS Code: 8512301100
Model NO.: JD. HL-160
Connection Mode: Double Wire
Current: 4A
Contact Point: With Contact Point
Energy Exchanging Mechanism: Electrical
Horn Base Material and Thickness: 1.0mm Iron
Use Life: 150, 000times
Click Material: Manganese Steel
Horn Color: Black
Warranty: 24 Month
Car Make: Universal
Certificates: E-MARK, CCC, Ts/ISO16949:2009
Diameter: 80mm
Sound Level: 105-118dB
Frequency: 400Hz~500Hz
Trademark: FHL
Transport Package: 1set/Steel Box; 20set/Carton
Specification: 50.5*27.5*21.5cm
Origin: Guangzhou, China
HS Code: 8512301100
Sound level: (DB)
Sound level: (DB)