1. Flow chart of production:
Scrambler Lining the performs--Â Preforms be loaded by transfer-- Heated by lamps
-- Blowing station(sealing-stretching-blowing)-- Bottles be delivered by transfer arm-- Finished goods.
2. Blowing Procedure:
(1) Loading preformsPreforms are put into the hopper and delivered to the scrambler by transfer belt. Lined preforms in the guiding rail will go into heating part automatically because of the gravity. So the whole process of scrambling preforms is accomplished automatically and with the features of high efficiency and low possibility of scratching preforms.
(2) Adjusting temperaturePreforms are put on the spindle by transfer arm and then continuously go through the heating zone, during this process preforms are rotating themselves so that it can be evenly heated. The heating zone is controlled by Siemens intelligent controller, so every layer of lamps can be controlled separately. The special design of neck protection device can prevent neck from being deformed. The temperature of every layer lamps is operated by human-computer interface, which is more convenient and intuitively.
(3) Stretching and blowingCylinder guiding rail structure accurately control the opening and closing of mold frame, so the mold frame structure is stable and easily to change molds. Special mold locking pressure increasing system; every blowing parameter can be adjusted by touch panel, can easily judge the breakdowns; special nozzle device guarantee the reliability of sealing even under all kinds of pressure, special blowing controlling way greatly improves the finished goods rate
(4) bottles be transferred out of equipmentAfter blowing, bottles will be catched by transfer arm in the spindle and then be delivered to the transferring belt, which guarantee the continuously bottle production, the bottles will be delivered to bottle tank finally.
3. Technical Specification :
MODEL
UNIT
5L
CONTAINER
Max.container volume
L
5
Max. neck diameter
mm
50
Max. container diameter
mm
180
Max. container height
mm
340
Number of cavities
Â
2
Theoretical output
BPH
1200
ELECTRICITY SYSTEM
Installed power
Kw
36
Max. heating power
Kw
32
COMPRESSED AIR SYSTEM
Operating pressure
Mpa
0.7
Low pressure Air consuming
M3/min
2.0Â
Blowing pressure
Mpa
4.0
High pressure Air consuming
M3/min
2.5-3.2
Use mould Booster
Â
Yes
CHILLED WATER
Pressure
Mpa
30-40
Temperature
ºC
10-12
Flow rate
L/min
30
MACHINE
Size(L*W*H)
mm
3500 X2100X1900
Weight
Kg
4500
4. Details:
5. If you are interested in our machines,welcome to our factory to visit.
Please Contact:
Miss Amy
Phone:+86 17751206107
Website:www.veshine.com
Automatic 4 Cavities Bottle Blowing Machine for Pet Beverage Bottle
Model NO.: the whole line
Warranty: One Year
Material: SUS304
Installation: Free
Delivery Time: 40days After Payment
Capacity: Determined by The Customer
Trademark: Veshine
Transport Package: Wooden Case
Specification: 2750*1750*1900mm
Origin: Zhangjiagang, Suzhou, China
HS Code: 8422301090
Pet bottle blow moulding machine:Â