1.BX100 series high pressure air compressor is the smallest, lightest portable breathing air compressor in the whole industry.
2.The BX100 series only 45 KG, can easily put it in the trunk of the car , carry to use the site.
3.It can be used in fire, scuba diving, shooting , emergency rescue, chemical, oil field and other fields.
4.Convenient to move, easy operation, and the high pressure air compression manufacturing meet EN 12021 international breathing compressed air standard.
5.The oil and contaminants in the compressed air are removed by filters and  oil- moisture separators in the duration of compression,so the outlet air is pure and odorless.It is safe and reliable breathing air supply machine.

Product Structure:   
1.Optional gasoline engine, three-phase, 4-stage-phase electric drive motor, V belt drive
2.Four cylinder level 4 high-pressure compressor
3.Specially treated alloy cylinder and pistons
4.Installed in the 400 bar high pressure on the compressor pressure gauge .
5.1.2 meters high pressure air tube, joints according to the needs of you
6.High temperature resistance plastic blowing steel frame
7.Manual stopping device
8.Precision air-intake filter
9.High-strength Stainless steel fan cover
10.Two oil-water separator, two drain valve (optional automatic decontamination)
11.Activated carbon molecular sieve filtration system
12.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure
13.Terminal safety valve pressure stepless adjustment
14.To set pressure automatic stop, prevent the relief valve frequent rev.Jump, ensure safety and security

1.BX100 series high pressure air compressor is the smallest, lightest portable breathing air compressor in the whole industry.
2.The BX100 series only 45 KG, can easily put it in the trunk of the car , carry to use the site.
3.It can be used in fire, scuba diving, shooting , emergency rescue, chemical, oil field and other fields.
4.Convenient to move, easy operation, and the high pressure air compression manufacturing meet EN 12021 international breathing compressed air standard.
5.The oil and contaminants in the compressed air are removed by filters and  oil- moisture separators in the duration of compression,so the outlet air is pure and odorless.It is safe and reliable breathing air supply machine.

Product Structure:   
1.Optional gasoline engine, three-phase, 4-stage-phase electric drive motor, V belt drive
2.Four cylinder level 4 high-pressure compressor
3.Specially treated alloy cylinder and pistons
4.Installed in the 400 bar high pressure on the compressor pressure gauge .
5.1.2 meters high pressure air tube, joints according to the needs of you
6.High temperature resistance plastic blowing steel frame
7.Manual stopping device
8.Precision air-intake filter
9.High-strength Stainless steel fan cover
10.Two oil-water separator, two drain valve (optional automatic decontamination)
11.Activated carbon molecular sieve filtration system
12.Filter is made by seamless aluminum alloy, outer can endure 550bar pressure
13.Terminal safety valve pressure stepless adjustment
14.To set pressure automatic stop, prevent the relief valve frequent rev.Jump, ensure safety and security

Silicone Rubber Mould

Silicone mould is a special mold for making crafts. According to performance, the raw materials of glue can be divided into ordinary silicone and weather silicone. The characteristics of silicone are high temperature resistance, corrosion resistance, strong tear resistance, high simulation precision, and it is used to make various handicrafts mold.

Mold should be made in time after the silicone is matched. Pour the glue on the highest part of the mold in a trickle, let it flow naturally, brush it in place with an oil paintbrush where the flow is not in place, if it is a piece of silicone, not only fill the entire product, but also brush the glue evenly. Each product should be brushed with at least three layers of silicone. The thickness of each layer of silicone is 1mm. In the process of brushing the silicone, each layer is required to be cured before the other layer can be brushed. When brushing the third layer, add one layer on top of the second layer. The thickness of the silica gel part of the whole mold is controlled in 3-4mm according to the different requirements of the size of the product, and the width is not greater than 60 mm of the product width. The time for the silicone to set is 20 minutes.

Silicone Injection Molding, Moulding Silicone, Rubber Molds, Rubber Mold Making

Sung Precision Mould & Plastic Co., Ltd. , https://www.injectionmoldingfactory.com