High Speed Blow Moulding Machine
1). Stable performance with advanced PLC. High Speed Blow Moulding Machine, PET Bottle Making Machine, Blow Moulding Machie TAIZHOU WATON MACHINERY CO LTD , https://www.watonblowing.com
*1 needle, 1 thread, real hand stitch machine, making pick stitch, saddle stitch.
*Stitch length and pin point length can be adjusted by computer.
*With the design of bearded shape hook needle and latch wire, you can load the thread easily. This machine is with automatic thread trimmer.
*Stitch inversion can be controlled by mini switch on the pedal.
Features of main machine :
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
11). Ideal cooling system make the finished bottles without any flaws.
China-Hand-Stitch-Machine
*Applicable for men's suit, ladies dress, overcoat, leather coat, casual shirts, pant, etc.