Computerized Non Shuttle Chain Stitich Multi Needle Quilting Machine (YXN-94-3C)
Posted on

Model NO.: YXN-94-3C
Pattern: Jump & Tack
Stitch: 2-8 Mm
Rolling Speed: 600-900 Rpm
Output: 10-180 M/H
Needle Bar Space: 2"+3", 3"+3"
Servo Motor: Panasonic Servo Motor
Trademark: yuxing
Specification: CE & ISO
Origin: Dongguan, China
HS Code: 84472030

Computer chain stitch carpet quilting machine
YXN-94-3C ( 3"+3")
Application:
Chain stitch quilting machine,be used to quilt sponge and fabric together for mattress,mattress  cover,sofa,etc.
1.Panasonic servo motor,driver,Delta frequency, bearings are made in Japan.
2. Auto stop system by thread broken , auto lift needle and adjust the speed by computer .
3.Auto faults tips for servo motor system , It's easier to operate .

Feature:
1.We have machine with 3 needle bar(5" and (6"),independent patterns of 2 inch, 3 inch, 5 inch,6 inch     can be processed with such machine.
2. Max quilting thickness can reach 80mm, fit for thicker material.
3.Machine body is with integration structure, easy for installation and dismounting.
4.More precise pattern quilting and  more pretty stitch.

Function:
1.It adopts the advanced process design.
2.Pressing block and needle bar taking the double rocker avoid the materials be soiled by lube.
3.High rigidity machine body,perfect protecting equipment and steady-going control system.
4.Principal axis takes frequency ports system, and  X,Y motors are driven by servo system.
5.Test the working state of all sensors and computer in real time.
6.Machine will autostop when the bottom or upper thread broke by infrared. Auto lift needle and adjust the speed by computer.
7.When the servo motor system and transducer has a problem, the computer will show up with a fault tip, which is convenient to eliminate problems.
8.360°quilting, limitless multi-span and independent quilting.
9.Steady running,high speed,low noise,very thick material with precise quilting.
10.Machine starts with ringing notice .

Guarantee and Loading:
1.one year guaratee and free after service under warranty.
2.If need be , customer can come to our factory for training, or we can also send our engineer for training.
3.Spare parts can be shiped with machines.
4.Usually for only one quilting machine, we need 1*20ft container for loading. If customer also
  need a cuting machine and a roller together, then 1*40ft container is needed.
5. All our machines are generally packed by plastic film. If needed, we can also pack machines in  wooden  .