High Eer/Cop Energy Saving Air-Cooled Screw Type Glycol Chiller with Ce
Posted on

Model NO.: HTSL-80AD, HTSL-100AD, HTSL-120AD, HTSL-150AD,
Certification: ISO, CE
Condition: New
Trademark: HERO-TECH
Transport Package: Plywood Box
Origin: Shenzhen China
HS Code: 841869
Air cooled screw chiller with Glycol solution
Temperature range:-35C to 5C

HTSL series low temperature screw chiller is widely adopted in manufacturing process in industries such as non-ferrous smelting, chemical and pharmaceutical, petroleum chemistry, grain and oil, food and beverage, mechanical, electric, air separation, etc.
Unit main parts include Semi-hermetic screw compressor, oil separator, condenser, economizer, evaporator and control system.

Design features:
Coolant temperature range -35C to 5C
High efficient semi-hermetic twin-screw compressor adopted, high COP, steady performance and long service life.
Compressor stepped capacity control, minimize starting current and impact to grid.
25%-100% continuous capacity control, ensuring compressor full performance, saving running cost for customers.
High accuracy touch screen and imported PLC controller adopted.
Multi-protection function: Compressor discharge over temperature, motor over temperature, anti-freezing, over current, phase sequence, high/low pressure, flow switch.
Mass Storage PLC, allows permanent reservation of more than 100 fault records, precisely monitors unit running state.
Pass word setting, avoids unit from shut down or damaged by accidental factor.
Control components including thermal expansion valve, solenoid valve, check valve are supplied by international brand, ensuring steady and efficient running under wide range of working condition.
Units are completely tested and operated at full load, leave factory with refrigerant, can be start once water and power is connected.
Compressor with built-in exhaust pot silencer ensures low noise running.
Corrosion-resistance water system upon request.
Refrigerant option: R22, R407C, R404A, R134A and R410A.

High Eer/Cop Energy Saving Air-Cooled Screw Type Glycol Chiller with Ce
 
model[HTSL-***] 80AD 100AD 120AD 140AD 160AD 180AD 200AD 240AD 280AD
nominal cooling capacity  -10ºC kw 128 170 184 224 246 292 336 402 478
 -20ºC 86 112 122 150 164 194 224 266 318
 -30ºC 64 84 90 112 122 144 166 200 236
max power consumption kw 87.2 106.4 120 142 158 178.4 203 249 285
power source   3PH-380V~415V/ 50HZ  
refrigerant type   R22/R404A
charge kg 62 78 94 108 124 140 154 186 218
control   thermostatic expansion valve
compressor type   semi-hermetic screw   
motor power kw 40×2 50×2 55×2 67×2 73×2 82×2 95×2 115×2 133×2
start mode   Y-Δ
capacity control % 0-25-50-75-100
evaporator type   shell and tube (ss plate heat exchanger)
coolant  volume  -10ºC m 3 /h 22 29.2 31.6 38.5 42.3 50.2 57.8 69.1 82.2
 -20ºC 14.8 19.3 21 25.8 28.2 33.4 38.5 45.7 54.7
 -30ºC 11 14.4 15.5 19.3 21 24.8 28.5 34.4 40.6
water pressure drop kPa 45 43 43 41 42 45 42 46 48
pipe connection inch 4 4 5 5 5 6 6 8 8
condenser type   air cooled type high efficiency finned cooper tube
fan information type   big volume & low noice axil fan
motor power kw 1.2× 6 0.8×8 1.2× 8 0.8×10 1.2× 10 1.2× 12 0.8×16 1.2× 16 1.2× 16
air volume m 3 /h 60000 75000 90000 105000 120000 135000 150000 180000 210000
safety devices    inner thermostat for compressor motor, unit overload relay, high and low pressure switch, freeze protection thermostat,reverse phase protection relay, discharge gas thermostat, flow switch, 
dimension length  mm 3200 4000 4800 5500 6200 6800 7800 8500 10500
depth  mm 1950 1950 1950 1950 2000 2000 2200 2200 2200
height  mm 2200 2200 2200 2200 2200 2200 2350 2350 2350
net weight kg 2600 3050 3450 3800 4200 4450 4850 5300 5550
running weight kg 2900 3350 3750 4200 4600 4950 5350 5900 6150
The above specifications is according to the following design conditions:
1. Condensing temperature 50ºC.
2. Cooling air inlet/outlet temperature 30ºC/38ºC.
We reserve the right to modify the specifications without further notice.		  

The QNP Steam Turbines` capacity mainly covers 200MW and below. Our normal impulse turbines are flexible and diverse in structure and layout so as to meet various requirement of our users. Aiming at the global leading equipment manufacturing enterprise, our design and R&D standards are higher than GB standard and in the same league with European and American energy equipment manufacturers.

Steam Tubine-NI Series

Condensing Steam Turbine, back pressure steam turbine

Shandong Qingneng Power Co., Ltd. , https://www.steamturbine.be