Fiber Laser Marking Machine Basic Info: Product Description: Energy Saving: The efficiency of optic-electrical converting is up to 70% Low Running Cost: No wearing part. Free maintaining, no need to adjust the laser path. Fiber laser marking system Product Advantages: 2. Software: Adopt Maxmarking latest version laser marking software, with more than 10 years development, it containing deep technical characteristic. General Warranty: MAX shall,at its option, repair of replace any product that proves, in the reasonable opinion of MAX, to be defective in materials or workmanship during the warranty period. All products repaird or replaces under warranty are only warranted for the remaining up-expired period of time in the original warranty for the particular defective product. MAX reserves the right to issue a credit note for any defective products that have proved defective through normal usage. Warranty limitations: 1. Be tampered with ,opened, disassembled, opened, or modified by persons other than MAX personnel. 2. Misused, neglected, or damaged by accident, used in applications which exceeds their specifications or rating. 3. Outsied of environmental specifications for the products. 4. Used with buyer software or interfacing. 5. Improperly installed, maintained or otherwise abused or used other than in accordance with the information and precautions contained in this User's Manual. 6. It is the customer's responsibility to understand and follow operating instructions in this User's Guide and specifications prior to operation-failure to do so many result in voiding this warranty. 7. Accessories and fiber connectors are not covered by this warranty. Important: Fiber Laser Marking Machine Basic Info: Product Description: Energy Saving: The efficiency of optic-electrical converting is up to 70% Low Running Cost: No wearing part. Free maintaining, no need to adjust the laser path. Fiber laser marking system Product Advantages: 2. Software: Adopt Maxmarking latest version laser marking software, with more than 10 years development, it containing deep technical characteristic. General Warranty: MAX shall,at its option, repair of replace any product that proves, in the reasonable opinion of MAX, to be defective in materials or workmanship during the warranty period. All products repaird or replaces under warranty are only warranted for the remaining up-expired period of time in the original warranty for the particular defective product. MAX reserves the right to issue a credit note for any defective products that have proved defective through normal usage. Warranty limitations: 1. Be tampered with ,opened, disassembled, opened, or modified by persons other than MAX personnel. 2. Misused, neglected, or damaged by accident, used in applications which exceeds their specifications or rating. 3. Outsied of environmental specifications for the products. 4. Used with buyer software or interfacing. 5. Improperly installed, maintained or otherwise abused or used other than in accordance with the information and precautions contained in this User's Manual. 6. It is the customer's responsibility to understand and follow operating instructions in this User's Guide and specifications prior to operation-failure to do so many result in voiding this warranty. 7. Accessories and fiber connectors are not covered by this warranty. Important: Screw Air Compressor,Screw Type Air Compressor,Rotary Screw Compressor,Rotary Screw Air Compressor ZHEJIANG YAOU AUTO PART.CO,LTD , https://www.yaoufilter.com
1. Overall Introduction
1)Standing:
The Smart Laser Engraving Machine applys the third generation laser marking system (Portable + Integration).
2)Operating Theory:
A Uses optical fiber laser to output
B Laser and realizes marking function
C Through high speed scanning galvanometer system.
Features:
1) Small Size & Portable
2) Highly Integrated & Convenient Assembly
3) Narrow Optical Pulse & High Peak PowerÂ
4) long Service Life & Energy Saving
              Â
Model No.:Â
MFS-20
Power :
10w/20w/30w
Laser Source:
Maxphotonics
Origin:
Shenzhen
Package:
Carton or Wooden case
Payment:
T/T in Advance
Apllicable:
Metal
Lead Time:
7-15 Working days
Warranty:
2 years
Trademark
Max
Certificate
ISO:9001:2008/CE/FDA
HS code
8456100090
Ear Tag Fiber Laser Marker for nonmetal and metal
Maxphotonics fiber laser marking system adopts international most advanced technology and the laser source is fiber with our own research and development, lifetime can reach 100, 000 hours, 8-10 years without any consumables and maintenance. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam. This is the best choice for the customers who have special requirements to the smallest &Â finest laser beam and character.
High Precision: Re-position precision is 0.002mm
High Speed: Imported scanning system makes the scanning speed is up to 12000mm/s
Easily Operating: Afford the specific marking software based on Windows, which is real-time adjust the laser power and pulse frequency. You can input and output by computer according to edit in the both of the specific marking software and the graphic software such as AutoCAD, CorelDRAW or Photoshop.
High Reliability: MTBF>100, 000 hours
Fiber laser marking system is adopted international advanced technology and the working material is fiber. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam.
2. Digital Galvanometer Laser Scanning Head with Fast Marking Speed: Fast Response Ability <0.7ms, High Speed Marking and High Precision
3. Focus Mirror: Singapore famous "Wavelength" brand, Fast speed, high transparent rate
4. Control System: Maxmarking control system with stable performance and high reliability. More than 10,000 sets of equipment are using Maxmarking control card, shield-utilizing parts of complex functions, ensuring higher stability.
5. Red Light Pointer: Adopt red light pointer to show the laser path since laser beam is in-visible.
6. Laser Power Supply: Adopt Taiwan Famous brand, Stable performance, long life span.
7. Portable Handle: Easy to held the machine by hand.
8. Emergency Stop: Press it when meets error, the machine will stop working immediately to avoid losses.
9. Key Switch: Using key swith to control the power of the machine.
10. Main Switch: It is designed as a easy button, safe and efficient.
Optional:
1. Rotary Fixture: Can engraving for cylinder work-pieces.
Model No.
MFS-10
MFS-20
Type
Portable
Â
PC includes or not
Not includes PC
Laser Source
MAX Series
Pulsed, High Energy Ytterbium Fiber Lasers
Mode of operation
Pulsed
Polarization:
random
Nominal average output power
10w
20W
Central emission wavelength:
1060-1070 nm ,Q-switched operation Output power
adjustment range 10%-100%
Emission Bandwidth (FWHM)
<10 nm
Long-term average power instability
<5%
Pulse width, (FWHM)
100 ns
Laser switching ON time
110 us
Laser switching OFF time
110 us
Pulse Repetition Rate* kHz
20-80 kHz
Energy per pulse (PRR =Â 20 kHz)
0.8-1 mJ
Typical beam quality, M2
<2.0
Output fiber delivery length
1.9/2.5/3m
Operating voltage:
220V
Max. Power consumption:
600W
Min.Line Width
0.01mm
Repeatition Accuracy
0.002mm
Laser system
Scanning Speed:
0-7000mm/s
Marking Speed:
0-5000mm/s
Marking size:
160*160mm (F-theta 160)
Spot size:
40 micron (F-theta 160)
Cooling unit:
Air cooled
Pilot laser:
650nm diode laser, visible red light for marking guide
Continuous working time:
16h
Humidity:
45~85% (no condensation)
Operating temperature:
0~40ºC
Control units
Maxmarking (English Version)
Application Field and Material:
Electronic ComponentsÂ
Resistance, capacitance, chips, printed circuit boards,Â
computer keyboard.
Apparatus And Meter
Panel signs, precision equipment ,etc.,
Instrument
Panel signs nameplates, precision equipment ,etc.,
Hardware ToolsÂ
Knives, tools, measuring tool, cutting tool, etc.,
Automobile PartsÂ
Pistons, piston rings, gears, shafts, bearings, clutch, lights, etc.,
Mechanical PartsÂ
Bearings, gears, standard parts, motors, etc.,
Daily NecessitiesÂ
Handicrafts, zipper, key holder, sanitary ware, etc.,
Jewelry Rings
Jewelry, gold, silver,etc.
Food,drinking packing
Plastic packings,etc.
FAQ
Q1.: What's the package?
A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
Q2.: Will the package damaged during transportation?
A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe tranportation. We have exported to 180 countries worldwide. So please don't worry, you will receive the parcel in good condition.
Q3.: How to install and run the machine?
A: Our technician have installed the machine before shipping. For some small parts installation, we will send detail training video, user's manual along with the machine. 95% customers can learn by themselves.
Q4.: How can IÂ do if the machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try fix the machine by yourself or someone else. We will response within 24 hours as quick as we can to solve it for you.
All products are warranted by MAX against defects in materials and workmanship for the period of time as set forth on the applicable purchase order or in the specifications starting with the date of shipment. Max also warrants that this product will meet applicable specifications under normal use.
Products, parts(including fiber connectors)or equipment which have been tampered with are not covered by this warranty.
Buyer must claim under the warranty in writing no later than 31 days after the claimed defect is discovered. This warranty does not extend to any third party, including without limitation Buyer's end-users or customers, and does not apply to any parts, equipment or other products not manufactured by MAX.
1. Overall Introduction
1)Standing:
The Smart Laser Engraving Machine applys the third generation laser marking system (Portable + Integration).
2)Operating Theory:
A Uses optical fiber laser to output
B Laser and realizes marking function
C Through high speed scanning galvanometer system.
Features:
1) Small Size & Portable
2) Highly Integrated & Convenient Assembly
3) Narrow Optical Pulse & High Peak PowerÂ
4) long Service Life & Energy Saving
              Â
Model No.:Â
MFS-20
Power :
10w/20w/30w
Laser Source:
Maxphotonics
Origin:
Shenzhen
Package:
Carton or Wooden case
Payment:
T/T in Advance
Apllicable:
Metal
Lead Time:
7-15 Working days
Warranty:
2 years
Trademark
Max
Certificate
ISO:9001:2008/CE/FDA
HS code
8456100090
Ear Tag Fiber Laser Marker for nonmetal and metal
Maxphotonics fiber laser marking system adopts international most advanced technology and the laser source is fiber with our own research and development, lifetime can reach 100, 000 hours, 8-10 years without any consumables and maintenance. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam. This is the best choice for the customers who have special requirements to the smallest &Â finest laser beam and character.
High Precision: Re-position precision is 0.002mm
High Speed: Imported scanning system makes the scanning speed is up to 12000mm/s
Easily Operating: Afford the specific marking software based on Windows, which is real-time adjust the laser power and pulse frequency. You can input and output by computer according to edit in the both of the specific marking software and the graphic software such as AutoCAD, CorelDRAW or Photoshop.
High Reliability: MTBF>100, 000 hours
Fiber laser marking system is adopted international advanced technology and the working material is fiber. The diode coupling with fiber to process pump, the pump light will course the particles reverse which can emit high quality laser beam.
2. Digital Galvanometer Laser Scanning Head with Fast Marking Speed: Fast Response Ability <0.7ms, High Speed Marking and High Precision
3. Focus Mirror: Singapore famous "Wavelength" brand, Fast speed, high transparent rate
4. Control System: Maxmarking control system with stable performance and high reliability. More than 10,000 sets of equipment are using Maxmarking control card, shield-utilizing parts of complex functions, ensuring higher stability.
5. Red Light Pointer: Adopt red light pointer to show the laser path since laser beam is in-visible.
6. Laser Power Supply: Adopt Taiwan Famous brand, Stable performance, long life span.
7. Portable Handle: Easy to held the machine by hand.
8. Emergency Stop: Press it when meets error, the machine will stop working immediately to avoid losses.
9. Key Switch: Using key swith to control the power of the machine.
10. Main Switch: It is designed as a easy button, safe and efficient.
Optional:
1. Rotary Fixture: Can engraving for cylinder work-pieces.
Model No.
MFS-10
MFS-20
Type
Portable
Â
PC includes or not
Not includes PC
Laser Source
MAX Series
Pulsed, High Energy Ytterbium Fiber Lasers
Mode of operation
Pulsed
Polarization:
random
Nominal average output power
10w
20W
Central emission wavelength:
1060-1070 nm ,Q-switched operation Output power
adjustment range 10%-100%
Emission Bandwidth (FWHM)
<10 nm
Long-term average power instability
<5%
Pulse width, (FWHM)
100 ns
Laser switching ON time
110 us
Laser switching OFF time
110 us
Pulse Repetition Rate* kHz
20-80 kHz
Energy per pulse (PRR =Â 20 kHz)
0.8-1 mJ
Typical beam quality, M2
<2.0
Output fiber delivery length
1.9/2.5/3m
Operating voltage:
220V
Max. Power consumption:
600W
Min.Line Width
0.01mm
Repeatition Accuracy
0.002mm
Laser system
Scanning Speed:
0-7000mm/s
Marking Speed:
0-5000mm/s
Marking size:
160*160mm (F-theta 160)
Spot size:
40 micron (F-theta 160)
Cooling unit:
Air cooled
Pilot laser:
650nm diode laser, visible red light for marking guide
Continuous working time:
16h
Humidity:
45~85% (no condensation)
Operating temperature:
0~40ºC
Control units
Maxmarking (English Version)
Application Field and Material:
Electronic ComponentsÂ
Resistance, capacitance, chips, printed circuit boards,Â
computer keyboard.
Apparatus And Meter
Panel signs, precision equipment ,etc.,
Instrument
Panel signs nameplates, precision equipment ,etc.,
Hardware ToolsÂ
Knives, tools, measuring tool, cutting tool, etc.,
Automobile PartsÂ
Pistons, piston rings, gears, shafts, bearings, clutch, lights, etc.,
Mechanical PartsÂ
Bearings, gears, standard parts, motors, etc.,
Daily NecessitiesÂ
Handicrafts, zipper, key holder, sanitary ware, etc.,
Jewelry Rings
Jewelry, gold, silver,etc.
Food,drinking packing
Plastic packings,etc.
FAQ
Q1.: What's the package?
A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
Q2.: Will the package damaged during transportation?
A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe tranportation. We have exported to 180 countries worldwide. So please don't worry, you will receive the parcel in good condition.
Q3.: How to install and run the machine?
A: Our technician have installed the machine before shipping. For some small parts installation, we will send detail training video, user's manual along with the machine. 95% customers can learn by themselves.
Q4.: How can IÂ do if the machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try fix the machine by yourself or someone else. We will response within 24 hours as quick as we can to solve it for you.
All products are warranted by MAX against defects in materials and workmanship for the period of time as set forth on the applicable purchase order or in the specifications starting with the date of shipment. Max also warrants that this product will meet applicable specifications under normal use.
Products, parts(including fiber connectors)or equipment which have been tampered with are not covered by this warranty.
Buyer must claim under the warranty in writing no later than 31 days after the claimed defect is discovered. This warranty does not extend to any third party, including without limitation Buyer's end-users or customers, and does not apply to any parts, equipment or other products not manufactured by MAX.
High Performance Aluminium Oxide Fiber Laser Engraving Machine Mps-20
Model NO.: MPS-20
Laser Classification: Fiber Laser
Engraving Method: Vector Engraving
Product Name: Fiber Laser Marking Machine Price
Model: Mfs-20
Power: 10W/20W
Marking Size: 160*160 (Depends on Lens)
Wavelength: 1064nm
Marking Line Width: 0.01mm
Repeatition Accuracy: 0.002mm
Frequency: 80-120kHz
Voltage: 100-240VAC
Warranty: 2 Years
Trademark: Maxphotonics
Transport Package: Carton or Wooden Case
Specification: 110*110mm working area
Origin: Shenzhen
HS Code: 8456100090
Model NO.: MPS-20
Laser Classification: Fiber Laser
Engraving Method: Vector Engraving
Product Name: Fiber Laser Marking Machine Price
Model: Mfs-20
Power: 10W/20W
Marking Size: 160*160 (Depends on Lens)
Wavelength: 1064nm
Marking Line Width: 0.01mm
Repeatition Accuracy: 0.002mm
Frequency: 80-120kHz
Voltage: 100-240VAC
Warranty: 2 Years
Trademark: Maxphotonics
Transport Package: Carton or Wooden Case
Specification: 110*110mm working area
Origin: Shenzhen
HS Code: 8456100090
High performance aluminium oxide fiber laser engraving machine MPS-20
Application Field and Material:
Application Field and Material: