Semi-Automatic Aerosol Filling Machines Semi-Automatic Aerosol Filling Machines,Automatic High Capacity Capsule Filling Machine,Capsule Filling Machine,New Bag On Valve Aerosol Filling MachineSemi-Automatic Aerosol Filling Machines,Automatic High Capacity Capsule Filling Machine,Capsule Filling Jinhu Fuda Machinery Co.,Ltd , https://www.efuda.com
Technical Parameter:
Capacity: 6 - 500 m3/h
Lift Head: 33 - 960m
Drive Power: 2.2 - 180kw
Rotary Speed: 980, 1480, 2950 r/min
Calibre: 50 - 150mm
Temperature range: -15º C - +80º C
Application:
1. Daily and fire water supply for high-rise
2. Water supply and discharge in mines
3. Cyclic pressurization, air-conditioning system.
Type D\DY\DF\DM multistage Pump is single-suction, multi-stage, segmental centrifugal pump. Type D It is provided for delivering clear water without solid particles or other liquid which is physically and chemically similar to clear water.
The temperature of the liquid is -20º C~ 80º C...Type DY is used to transfer non-corrosive oil and oil products without solid particles and with viscosity less than 120 centistokes. The temperature of the liquid is -20º C~ 150º C Type DF is used to transfer corrosive liquid without solid particles, The temperature of the liquid is --20~+150º C. Type DM is used to transfer clear water or liquid which is physically and chemically similar to clear water with limited solid particles
Construction:
Type D\DY\DF\DM pumps are horizontally installation. The direction of inlet and outlet of Type DY\DF is vertical upward except type D pump with horizontal inlet. Type DYI\II\IIIDF can be also with horizontal inlet and outlet.
The axial thrust gets balanced with the help of balance disk. Type D, DY, DF3_40 pumps get the balanced with the help of
Symmetrically construction
The shaft seal usually uses packing seal, according to customers' requirements, mechanical seal is used, too. Type DF85_67pumps use sliding bearings which get lubricated with dilute--oil.
The others use rolling bearings which get lubricated with grease except type DF85-67 pump with dilute oil.
Materials of tolerance parts: Type D pump are made of cast iron, the shaft is 45# steel.
Type DY: The materials are divided into three types: I - cast iron(the temperature in operation is 20--150º C)
II_cast steel (the temperature in operation is 45--400º C)
III_stainless steel (the temperature in operation is 45--400º C)
Type DF: According to the liquid can be divided into cast steel and stainless steel.
Type DM: Anti-friction cast iron
Description of pump type:
For example D(DY\DF, DM)I\II\III\85--67x8
D-- multistage centrifugal Pump
D-- multistage centrifugal Pump for boiler feed
DY_multistage oil pump
DF-- multistage anti-corrosive pump
DM-- multistage anti-friction pump
I\II\III_code of materials
85capacity(m3/h)
67head of each stage
8number of stage, total head is 67x8=536(m)
Warranty Period:
1) Please operate according to pump productdescription. If you have any questions of pumps, kindly contact us, we will offer you the most professional and the best service.
2) We guarantee our products for a period of ONE YEAR from date of dispatch from our factory (The warranty doens't apply to wearing parts).
Horizontal multistage pump for mine use and bolier feed water transferÂ
Technical Parameter:
Capacity: 6 - 500 m3/h
Lift Head: 33 - 960m
Drive Power: 2.2 - 180kw
Rotary Speed: 980, 1480, 2950 r/min
Calibre: 50 - 150mm
Temperature range: -15º C - +80º C
Application:
1. Daily and fire water supply for high-rise
2. Water supply and discharge in mines
3. Cyclic pressurization, air-conditioning system.
Type D\DY\DF\DM multistage Pump is single-suction, multi-stage, segmental centrifugal pump. Type D It is provided for delivering clear water without solid particles or other liquid which is physically and chemically similar to clear water.
The temperature of the liquid is -20º C~ 80º C...Type DY is used to transfer non-corrosive oil and oil products without solid particles and with viscosity less than 120 centistokes. The temperature of the liquid is -20º C~ 150º C Type DF is used to transfer corrosive liquid without solid particles, The temperature of the liquid is --20~+150º C. Type DM is used to transfer clear water or liquid which is physically and chemically similar to clear water with limited solid particles
Construction:
Type D\DY\DF\DM pumps are horizontally installation. The direction of inlet and outlet of Type DY\DF is vertical upward except type D pump with horizontal inlet. Type DYI\II\IIIDF can be also with horizontal inlet and outlet.
The axial thrust gets balanced with the help of balance disk. Type D, DY, DF3_40 pumps get the balanced with the help of
Symmetrically construction
The shaft seal usually uses packing seal, according to customers' requirements, mechanical seal is used, too. Type DF85_67pumps use sliding bearings which get lubricated with dilute--oil.
The others use rolling bearings which get lubricated with grease except type DF85-67 pump with dilute oil.
Materials of tolerance parts: Type D pump are made of cast iron, the shaft is 45# steel.
Type DY: The materials are divided into three types: I - cast iron(the temperature in operation is 20--150º C)
II_cast steel (the temperature in operation is 45--400º C)
III_stainless steel (the temperature in operation is 45--400º C)
Type DF: According to the liquid can be divided into cast steel and stainless steel.
Type DM: Anti-friction cast iron
Description of pump type:
For example D(DY\DF, DM)I\II\III\85--67x8
D-- multistage centrifugal Pump
D-- multistage centrifugal Pump for boiler feed
DY_multistage oil pump
DF-- multistage anti-corrosive pump
DM-- multistage anti-friction pump
I\II\III_code of materials
85capacity(m3/h)
67head of each stage
8number of stage, total head is 67x8=536(m)
Warranty Period:
1) Please operate according to pump productdescription. If you have any questions of pumps, kindly contact us, we will offer you the most professional and the best service.
2) We guarantee our products for a period of ONE YEAR from date of dispatch from our factory (The warranty doens't apply to wearing parts).
Horizontal Boiler Feed Water Transfer Multistage Pump
Model NO.: D
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Ring Sectional
Mounting Height: Since Irrigation Centrifugal Pumps
Impeller: Closed
Usage: Pump, Pumps, Condensate Pump, Circulating Pump, Boiler Feed Water
Flange Standard: DIN
Trademark: Pacific Pump
Transport Package: Marine Wooden Case
Specification: DIN, ISO, ANSI
Origin: Shanghai
HS Code: 8413709990
Model NO.: D
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Ring Sectional
Mounting Height: Since Irrigation Centrifugal Pumps
Impeller: Closed
Usage: Pump, Pumps, Condensate Pump, Circulating Pump, Boiler Feed Water
Flange Standard: DIN
Trademark: Pacific Pump
Transport Package: Marine Wooden Case
Specification: DIN, ISO, ANSI
Origin: Shanghai
HS Code: 8413709990
Horizontal multistage pump for mine use and bolier feed water transferÂ