First, the basic role of float trap is to discharge the condensate, air and carbon dioxide gas in the steam system as soon as possible; at the same time, to prevent the leakage of steam to the maximum extent.

Second, the structure of the float trap is simple, there is only a stainless steel hollow float with fine grinding of moving parts. It is both float and open and close parts. It has no wearing parts and has a long service life. The YQ trap has Y series inside. Automatic air exhaust device, very sensitive, can automatically discharge air, high quality work.

3. When the equipment is started, the air in the pipeline is discharged through the Y series automatic air discharge device. The low-temperature condensate enters the float trap. The level of the condensate rises, the float rises, the valve opens, and the condensate drains quickly. The steam quickly enters the equipment, the equipment heats up quickly, the temperature sensing liquid of the Y Series automatic air discharge device expands, and the automatic air exhaust device closes. Float-type steam traps start working normally, and the float floats up and down with the condensate level, blocking the steam discharge. The seat of the free float trap is always below the liquid level, forming a water seal, no steam leakage, and good energy saving effect. Minimum operating pressure 0.01Mpa, from 0.01Mpa to the maximum use pressure within the scope of the temperature and working pressure fluctuations, continuous drainage. Saturated temperature can condense water, the minimum degree of undercooling is 0 °C, there is no water in the heating equipment, can make the heating equipment to achieve the best heat transfer efficiency. With a back pressure greater than 85%, it is one of the most ideal traps for heating equipment in the production process.