In winter, the most annoying estimate of car owners is haze, because in the case of fog, visibility will be reduced, and there is a certain safety risk. Especially in the case of heavy fog, not only the line of sight is blocked, but also the fog on the glass of the car, which is undoubtedly worse. So, how do you avoid fogging on the windows when driving in fog?

1. Dehumidify the air-conditioning system. Winter air-conditioning mist removal method is more common, although its effect is not faster than directly open the cold wind glass effect, but will not let the people feel cold in the car, and the effect is better, but the effect of a long time. Because the hot air will dry the water in the car, the glass will not reappear in a long time. In addition, the opening of the external circulation during driving can also prevent the generation of fog to some extent.

2, open the window convection. If the fog is not high or the temperature outside the car is not very low, the windows on both sides can be properly lowered to allow the temperature in the car to be convected and slowly balance the outside temperature. This can also prevent Fog on the glass.

3, anti-fog detergent. The method of blending "anti-fogging agents" to prevent fog has been known by many people. The ratio of detergent and water is about 1 to 10, and then apply it on the inside of the front and rear windshields with absorbent cotton or a clean and soft cloth. Leave the watermark on the inside of the glass and wipe off the remaining watermark when it is dry, and use it with the air conditioner better.

Finally, there is the point that fog will not only appear on the front windscreen of the car, but also on the side and rear rows of glass. The fog on the side of the glass also needs attention, because it will affect the driver to observe the rearview mirror. If you want to eliminate the fog on the front side windows, you can close the two central air outlets so that the air outlets on both sides can get more air output, thus reducing the formation of fog. You must pay attention to safety in winter driving, especially if the fog is serious. Only by taking appropriate preventive measures can the safety of driving be guaranteed.

Machining Titanium

In the process of machining titanium alloy, the titanium alloy material itself has low modulus of elasticity, large elastic deformation, high cutting temperature, low thermal conductivity and high chemical activity at high temperature, which makes the sticky knife phenomenon serious, easily aggravating the tool wear and even breakage, which leads to the poor machinability of the titanium alloy. Therefore, machining titanium alloy requires proper cutting tools and good machining technology.

Machining Titanium,Titanium Machining Parts,Titanium Cnc Turning Machining Parts

Hong Kong RYH CO., LTD , https://www.szcncmilling.com