The finned tube is to improve the heat exchange efficiency. By adding fins on the surface of the heat exchange tube, the outer surface area (or inner surface area) of the heat exchange tube is increased, so as to achieve the purpose of improving the heat exchange efficiency. Such a heat exchange tube . Usually used for heat exchange between liquid and gas.
Finned tube is a heat exchange element. As a heat exchange element, finned tubes usually work under high-temperature flue gas conditions for a long time. For example, the finned tubes usually used in boiler or harsh environments, high temperature and high pressure, and in a corrosive atmosphere. This requires that the finned tubes should have high anti-corrosion properties, Anti-wear properties, lower contact resistance, higher Stability and anti-dusting ability.
There are many types of finned tubes, and new varieties are constantly emerging. According to the classification of processing technology, there are extruded fin tube; high frequency welded finned tubes; rolled formed finned tubes; suit formed finned tubes ; cast finned tubes; tension wound finned tubes; Inserted tubes.
According to the shape of the fins, there are square finned tubes; circular finned tubes; spiral finned tubes; longitudinal finned tubes; corrugated finned tubes; spiral serrated fins Helical Serrated Finned Tubes; pin-shaped finned tubes; integral plate-shaped finned tubes; inner finned tubes.
According to whether the fin material of the finned tube is the same as that of the base tube, it can be divided into: single metal finned tube, bimetallic composite finned tube.
Single metal finned tubes are classified by material into copper finned tubes; aluminum finned tubes; carbon steel finned tubes; stainless steel finned tubes; cast steel finned tubes.
Finned Tube,Extruded Fin,Brown Fin Tube,Longitudinal Finned Tube Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com
Â
The lamella clarifier also called inclined plate sediment tank,It is kind of high efficient combined type settling tank; set many dense inclined tube packing in sediment area, to make the suspended impurity in water sediment, water rise flow along inclined tube, the separated sludge down to the tank bottom along the inclined tube by gravity, then discharge it in concentration. Such tank can improve sediment efficiency 50~60%, it can improve treatment capacity 3~5 times in the same area. It can design different flow rate inclined plate sediment device according to raw waste water test report, it need dose flocculant usually.Â
Inclined plate sediment water purifier is format by install 60° dip angle inclined tube above the sludge suspended layer, to make the suspended solids or floc alum flower by dosing flocculant accumulate into thin sludge later in inclined tube downside superficial area, slide back to sludge suspended layer rely on gravity, then settling in sludge collecting hopper, discharge into sludge tank by sludge pipe for separate treatment or comprehensive utilization. The supernatant fluid gradually rise to water collecting pipe discharge or reuse.
2. Feature:
2.1 Simple structure,without wearing parts,wear well,decrease maintenance.
2.2 Steady operation,easy operation.
2.3 Small power,save energy.
2.4 Small occupy area, low investment, high efficient.
2.5 Short retention time, high sediment efficiency, no sludge backflow.
3. Application scope
3.1 Electroplate effluent contain many kinds of metal ion, cr,cu,Fe,Zn ,Ni etc remove rate all above 90%, after treatment, all can reach discharge standard.
3.2 Coal mine,mineral processing waste water all can make the turbidity from 500-1500 mg/L reduce to 5Â mg/L.
3.3 Printing and dyeing,bleach and dye etc effluent chroma removing rate reach 70~90%,COD remove rate 50-70%.
3.4 Tannery ,food etc industrial sewage COD remove rate 50~80%, impurity solids remove rate above 90%.
3.5 Chemical waste water COD remove rate 60~70%, chroma removal rate 60~90%, suspended solids reach discharge standard.
4. Technical data:
Specification model
YMXGYMXG-5
YMXG-10
YMXG-15
YMXG-20
YMXG-25
YMXG-30
YMXG-40
YMXG-50
treatment capacity(m3/h)
5
10
15
20
25
30
40
50
equipment size (m)
2.2*2*2.5
2.25*2.25*3.5
2*2.5*6
8*2.25*2.25
8*3*4.5
8*3.5*4.5
10*3.5*4.5
12*3.5*4.5
5. Structure introduction
5.1 Inclined tube material: PVC,PE,PP ,inclined plate: carbon steel lining.
5.2 Inclined tube cross section is regular hexagon, inclined plate cross section can be parallel-plate.
5.3 The cleaning water area height is 1.0-1.5m above the inclined pipe top, the water distribution zone below the bottom no less than 1.0-1.5m, mechanical discharge sludge, the water distribution zone height should more than 1.6m, convenient install and maintenance.
5.4 The Re number in water flow less than 500,Fr number is 10-3-10-5 in inclined pipe.
5.5 Inclined tube design flow rate is 1.0-4.0mm/s, inclined plate 10-20mm/s.
6.Our advantages
6.1 Material is anti-corrosion carbon steel,tinkness is 8mm,long life.
6.2 Flocculation pipe instead of flocculation tank,save space and cost.
 Contact us
Name
Dola Li
Â
Â
Â
Â
Mobile phone
+86 15275216505
Â
Â
 Â
 Â
Tel
0532-88180456
Fax
0532-88180610
Web
http:www.qingdaoyimei.cn/
Address
No 386 ,Hai Bin Five Road,jiaonan, Qingdao, China
Â
The lamella clarifier also called inclined plate sediment tank,It is kind of high efficient combined type settling tank; set many dense inclined tube packing in sediment area, to make the suspended impurity in water sediment, water rise flow along inclined tube, the separated sludge down to the tank bottom along the inclined tube by gravity, then discharge it in concentration. Such tank can improve sediment efficiency 50~60%, it can improve treatment capacity 3~5 times in the same area. It can design different flow rate inclined plate sediment device according to raw waste water test report, it need dose flocculant usually.Â
Inclined plate sediment water purifier is format by install 60° dip angle inclined tube above the sludge suspended layer, to make the suspended solids or floc alum flower by dosing flocculant accumulate into thin sludge later in inclined tube downside superficial area, slide back to sludge suspended layer rely on gravity, then settling in sludge collecting hopper, discharge into sludge tank by sludge pipe for separate treatment or comprehensive utilization. The supernatant fluid gradually rise to water collecting pipe discharge or reuse.
2. Feature:
2.1 Simple structure,without wearing parts,wear well,decrease maintenance.
2.2 Steady operation,easy operation.
2.3 Small power,save energy.
2.4 Small occupy area, low investment, high efficient.
2.5 Short retention time, high sediment efficiency, no sludge backflow.
3. Application scope
3.1 Electroplate effluent contain many kinds of metal ion, cr,cu,Fe,Zn ,Ni etc remove rate all above 90%, after treatment, all can reach discharge standard.
3.2 Coal mine,mineral processing waste water all can make the turbidity from 500-1500 mg/L reduce to 5Â mg/L.
3.3 Printing and dyeing,bleach and dye etc effluent chroma removing rate reach 70~90%,COD remove rate 50-70%.
3.4 Tannery ,food etc industrial sewage COD remove rate 50~80%, impurity solids remove rate above 90%.
3.5 Chemical waste water COD remove rate 60~70%, chroma removal rate 60~90%, suspended solids reach discharge standard.
4. Technical data:
Specification model
YMXGYMXG-5
YMXG-10
YMXG-15
YMXG-20
YMXG-25
YMXG-30
YMXG-40
YMXG-50
treatment capacity(m3/h)
5
10
15
20
25
30
40
50
equipment size (m)
2.2*2*2.5
2.25*2.25*3.5
2*2.5*6
8*2.25*2.25
8*3*4.5
8*3.5*4.5
10*3.5*4.5
12*3.5*4.5
5. Structure introduction
5.1 Inclined tube material: PVC,PE,PP ,inclined plate: carbon steel lining.
5.2 Inclined tube cross section is regular hexagon, inclined plate cross section can be parallel-plate.
5.3 The cleaning water area height is 1.0-1.5m above the inclined pipe top, the water distribution zone below the bottom no less than 1.0-1.5m, mechanical discharge sludge, the water distribution zone height should more than 1.6m, convenient install and maintenance.
5.4 The Re number in water flow less than 500,Fr number is 10-3-10-5 in inclined pipe.
5.5 Inclined tube design flow rate is 1.0-4.0mm/s, inclined plate 10-20mm/s.
6.Our advantages
6.1 Material is anti-corrosion carbon steel,tinkness is 8mm,long life.
6.2 Flocculation pipe instead of flocculation tank,save space and cost.
 Contact us
Name
Dola Li
Â
Â
Â
Â
Mobile phone
+86 15275216505
Â
Â
 Â
 Â
Tel
0532-88180456
Fax
0532-88180610
Web
http:www.qingdaoyimei.cn/
Address
No 386 ,Hai Bin Five Road,jiaonan, Qingdao, China
Inclined Plate Sediment Water Purifier
Model NO.: YMXG
Trademark: YiMei
Transport Package: Nuded Cargo
Specification: 3.5m*2.2m*2.2m
Origin: Qingdao, China
HS Code: 8421219990
Model NO.: YMXG
Trademark: YiMei
Transport Package: Nuded Cargo
Specification: 3.5m*2.2m*2.2m
Origin: Qingdao, China
HS Code: 8421219990
Lamella clarifierÂ
1. Introduction
Lamella clarifierÂ
1. Introduction