Microwave Ferrite,Ferrite Magnetic Materials,Microwave Magnetic,Microwave Ferrite Magnetic DONGYANG FIRST MAGNETICS CO.,LTD. , https://www.firstmagnetism.com
1.Hot forging aims to fabricate the work pieces of certain temperature (different materials require different temperatures) into other shapes.
Through forging press with the help of punch press, forging machine or other equipments, for instances, hot extrusion of watch case, watch flan, handle, mold accessory, kitchen and table ware, art ware, standard part, fastener, fabricated mechanical part, bronze lock, rivet, steel pin and pin.
2. Hot fitting refers to the connection of different metals or metals with nonmetals through the heating based on the principle of hot expansion or hot smelting for instances, embedded welding of copper core of computer radiator with aluminum sheet and speaker web, compound of steel and plastic tube, sealing of aluminum foil (tooth paste peel), motor rotor and sealing of tubular electric heating element.Â
Technical parameters:
(1) Model: GMF-35--GMF110
(2) Output frequency: 1- 20KHZ
(3) Output voltage: 70~520V
(4) Input: 380V, 415V, 480V three phases 50 or 60HZ
(5) Duty cycle: 100%
Applications:
1)M. F. Hot forging furnace is used for the heating of bars and rods larger than Φ 12, the material can be steel, stainless steel, copper, brass, Aluminum and so on.
2)The heating can be the whole rod, end of the rod or middle part of the rod.
3)Hot forging example: Fastening, screw, nut and so on
Structure characteristics:
The furnace includes medium frequency generator, compensating cap, working table, induction coil, coil cover, rod feeder and so on.
For some special applications, the infrared sensor, temperature controller and automatic rod feeding systems can also be included.
Main features of the M. F. Hot forging furnace:
1) Wide frequency range from 2KHZ to 20KHZ, frequency can be designed to satisfy different size of the heated rods.
2) In the continuous heating process, the load inside the coil is stable, thus to overcome high heating power change caused by large change of the load during the heating course from room temperature to 1100 degree. The actual power can reach more than 85% of the rated power of the machine.
3) Even when heating non-ferrous metals like copper or aluminum, the actual power can also reach more than 85% of the rated power of the machine by design the coil properly and match the compensating cap correctly. 3.5KG copper or brass can be heated to 700 degree per kilowatt in an hour.
models
Max. Input Power
Heating ability of normal material
Steel or S.S to 1100degree
Copper or brass to 700degree
GMF-25 forging furnace
25KW
0.83 KG/min
1.17 KG/min
GMF-35 forging furnace
35KW
1.25 KG/min
1.75 KG/min
GMF-45 forging furnace
45KW
1.67 KG/min
2.33 KG/min
GMF-70 forging furnace
70KW
2.5 KG/min
3.5 KG/min
GMF-90 forging furnace
90KW
3.33 KG/min
4.67 KG/min
GMF-110 forging furnace
110KW
4.17 KG/min
5.83 KG/min
GMF-160 forging furnace
160KW
5.83 KG/min
Â
1.Standard wooden case, plywood case, and custormized case;
2. Inner packing: packing plastic film and foam to avoid any damage during shipping
3.Accessories: induction coilX 2, foot pedal X1, installing and operating instruction X1Â and custormized;
Our service
1. Reply your inquiry within 24 working hours
2. Experienced enginee and sales communicate with you in fluent English.
3. According to work pieces specifications, heating requirements to offer you best solutions,also reference your ideas.
4. Machine details and working video link for your reference
5. Top Quality with Competitive price
6. We strictly control all the production process to make sure our machine in top quality and long-term work time. Â
7. Tracking goods shipping and provide bill of lading,invoice,packing list and other documents what you need
Â
Induction Heating Machine with forging furnace for Bolt and Nut Hammer Forging
1.Hot forging aims to fabricate the work pieces of certain temperature (different materials require different temperatures) into other shapes.
Through forging press with the help of punch press, forging machine or other equipments, for instances, hot extrusion of watch case, watch flan, handle, mold accessory, kitchen and table ware, art ware, standard part, fastener, fabricated mechanical part, bronze lock, rivet, steel pin and pin.
2. Hot fitting refers to the connection of different metals or metals with nonmetals through the heating based on the principle of hot expansion or hot smelting for instances, embedded welding of copper core of computer radiator with aluminum sheet and speaker web, compound of steel and plastic tube, sealing of aluminum foil (tooth paste peel), motor rotor and sealing of tubular electric heating element.Â
Technical parameters:
(1) Model: GMF-35--GMF110
(2) Output frequency: 1- 20KHZ
(3) Output voltage: 70~520V
(4) Input: 380V, 415V, 480V three phases 50 or 60HZ
(5) Duty cycle: 100%
Applications:
1)M. F. Hot forging furnace is used for the heating of bars and rods larger than Φ 12, the material can be steel, stainless steel, copper, brass, Aluminum and so on.
2)The heating can be the whole rod, end of the rod or middle part of the rod.
3)Hot forging example: Fastening, screw, nut and so on
Structure characteristics:
The furnace includes medium frequency generator, compensating cap, working table, induction coil, coil cover, rod feeder and so on.
For some special applications, the infrared sensor, temperature controller and automatic rod feeding systems can also be included.
Main features of the M. F. Hot forging furnace:
1) Wide frequency range from 2KHZ to 20KHZ, frequency can be designed to satisfy different size of the heated rods.
2) In the continuous heating process, the load inside the coil is stable, thus to overcome high heating power change caused by large change of the load during the heating course from room temperature to 1100 degree. The actual power can reach more than 85% of the rated power of the machine.
3) Even when heating non-ferrous metals like copper or aluminum, the actual power can also reach more than 85% of the rated power of the machine by design the coil properly and match the compensating cap correctly. 3.5KG copper or brass can be heated to 700 degree per kilowatt in an hour.
models
Max. Input Power
Heating ability of normal material
Steel or S.S to 1100degree
Copper or brass to 700degree
GMF-25 forging furnace
25KW
0.83 KG/min
1.17 KG/min
GMF-35 forging furnace
35KW
1.25 KG/min
1.75 KG/min
GMF-45 forging furnace
45KW
1.67 KG/min
2.33 KG/min
GMF-70 forging furnace
70KW
2.5 KG/min
3.5 KG/min
GMF-90 forging furnace
90KW
3.33 KG/min
4.67 KG/min
GMF-110 forging furnace
110KW
4.17 KG/min
5.83 KG/min
GMF-160 forging furnace
160KW
5.83 KG/min
Â
1.Standard wooden case, plywood case, and custormized case;
2. Inner packing: packing plastic film and foam to avoid any damage during shipping
3.Accessories: induction coilX 2, foot pedal X1, installing and operating instruction X1Â and custormized;
Our service
1. Reply your inquiry within 24 working hours
2. Experienced enginee and sales communicate with you in fluent English.
3. According to work pieces specifications, heating requirements to offer you best solutions,also reference your ideas.
4. Machine details and working video link for your reference
5. Top Quality with Competitive price
6. We strictly control all the production process to make sure our machine in top quality and long-term work time. Â
7. Tracking goods shipping and provide bill of lading,invoice,packing list and other documents what you need
Â
Induction Heating Machine with Forging Furnace for Bolt and Nut Hammer Forging
Model NO.: GMF series
Certification: CE
Trademark: geelly china
Transport Package: Wooden
Specification: depend
Origin: China
HS Code: 85144000
Model NO.: GMF series
Certification: CE
Trademark: geelly china
Transport Package: Wooden
Specification: depend
Origin: China
HS Code: 85144000
Induction Heating Machine with forging furnace for Bolt and Nut Hammer Forging