Popularize elevator safety common sense

Old elevators gradually entered the high incidence of accidents. The contradiction between the increasing number of elevators and the lack of regulatory power has been constantly highlighted. The problems such as the lack of awareness of public safety in elevators have always plagued the regulatory authorities. In order to solve these problems and ensure public safety by taking the stairs, the city explored a set of "boxing punches" for elevator safety regulation. Among them, a batch of "smart elevators" being built through the Internet of Things technology will realize the integrated management of elevator safety or provide a good square.

Innovative elevator safety supervision mode

This year, the Municipal Bureau of Quality Supervision for Jinhua elevator safety supervision of the new situation, new problems and new situations, the introduction of elevator management philosophy to explore a new model of elevator safety supervision.

Elevator + Legislation. Earlier this year, the Municipal Bureau of Quality Supervision established a draft drafting team to fully absorb the good practices and measures from all over the country through pre-investigation and to further standardize the responsibilities of various departments and social organizations in the form of laws and regulations and further clarify the functions of elevator insurance, maintenance funds, Security unit management and other content, focus on regulatory aspects of the regulatory shortcomings. The draft draft is now submitted to the municipal government for review.

Elevator + Insurance. In January of this year, the Municipal Bureau of Quality Supervision and the Municipal Financial Office and the Insurance Industry Association jointly issued the document and took the lead in carrying out pilot safety liability insurance for elevators in the province in accordance with the principle of "broad coverage, low rates, one-party insurance and multiple benefits" Third-party elevator liability and employer's responsibility during operation are covered by insurance. As of the end of May, the number of elevator insurance in our city has exceeded 700 units, and strive to include at the end of the year the city's safety liability insurance pilot elevator not less than 2000 units.

Lift + rescue Combined with the increasing number of elevators and the continual expansion of emergency rescue area, the city actively carried out the research on elevator emergency rescue linkage units, organized the intentional interviews with elevator emergency rescue units, and increased the emergency rescue teams for elevators from 2 to 4, is currently organizing the training of selected units, will be formally incorporated into the 110 command platform in July, to further enhance the ability and level of emergency rescue.

Elevator + wisdom. The city carried out the pre-investigation of the construction of a large data center for intelligent regulation of elevators and proposed a "two-step" proposal. After the first pilot, it was popularized and formal reports were submitted to the municipal government for study and decision-making.

"Smart Elevator" to achieve one-stop management and control

An important part of "Elevator + Wisdom" is to realize integrated elevator safety management through Internet of Things technology.

Recently, the urban Bayi South Street, Gaoyang building occurred in an elevator trapped person incident. Exclusion of hidden dangers, the Zhejiang cloud of Anda Internet of Things Information Technology Co., Ltd. for the Goyang Building, this "accident elevator" installed elevator Internet of Things security monitoring system, as long as the online login elevator Internet of things system, you can remotely access the elevator Running status.

"This elevator IoT safety monitoring system collects elevator related operating data through a special sensor and then analyzes the abnormal data through the microprocessor to strengthen the interaction with the front-end elevator gateway monitoring equipment. The system can remotely control the front-end equipment Control, including parameter settings, remote upgrades, remote data exchange, wake-up SMS, etc., so that the same equipment can be remotely sensed and controlled. "The company staff said the system can be set elevator fault situation awareness of early warning, emergency rapid disposal , Maintenance operation verification, status remote monitoring, daily safety supervision, quality supervision and assessment, hidden danger prevention and elimination, propagation safety knowledge, elevator maintenance unit selection, rating, elevator and its components procurement and multimedia transmission functions are integrated into one Wisdom elevator management platform.

It is learned that the city started to explore integrating the integrated management of public services for the elevator IOT into the field of intelligent public safety application of the city in light of the frequent failures of old and old elevators, the lack of awareness of the main responsibility for the safety of units using elevators, and lack of safety supervision strength. Using IOT technology for remote monitoring elevator operation and improve the city's elevator safety management and public service levels.

"At present, the elevator IOT safety monitoring system has been installed and tested in the elevator in a few public places in our city and it works well." The person in charge of the Municipal Quality Supervision Bureau said that the city is preparing the installation of Internet of Things safety monitoring system for 500 elevators in the city Pilot project.

Safety Take the stairs start from scratch

Take the elevator, stand still, body block the door, can not; encounter ladder, according to the alarm, Mo Pa gate, to be calm; take the escalator, to stand, cascade, not jumping; step on the yellow line, dangerous, hold Handrails, security; children, keep in mind, Qi joy, the whole family laughed. "Recently, the Municipal Bureau of Quality Supervision in the Jindong District Shuguang primary" one hundred cities million "child safety boarding promotional activities, "Three Character Classic" spread in the mouth of children.

In a bus, the city Bureau of Quality Supervision staff set up a safe take a ladder, a ladder to help rescue publicity panels, with primary school students in batches to visit.

In case of elevator stop, trapped elevator, what to do? Staff said, first of all do not be alarmed, the elevator ventilation system, will not suffocate; immediately with the elevator alarm, intercom or call 96333 phone and management personnel to contact for help; if the alarm is invalid, intermittent call for help or light Take the elevator door, pay attention to maintain physical strength. Instead of exorbitant derailment, some excesses will only make the situation even more dangerous. For example, it may be indiscriminately leaping in and out of reach of the elevator car forcibly.

What should I do if the elevator suddenly goes down? Staff said that no matter in the first few layers, should quickly press the keys on each floor, so that when the emergency power supply starts, the elevator can be stopped immediately; the entire back and head close to the inner wall of the elevator, the use of elevator walls As the protection of the spine; If there are handrails in the elevator, hold the handrail, if there is no available hand holding the neck; knee bent posture, toe point, heel lift to buffer the impact.

"Finally, a lot of times when the elevator falls are not actually fallen, most of them are an anti-base station behavior after the elevator system detects the failure (the base station is generally on the first floor)." The staff said that there are many elevator protective devices, Elevator set speed limiter --- safety gear protection device, as a result of the failure of the elevator speeding operation, the safety gear will be stuck in the elevator car on the rail. In addition, there is a buffer under the hoistway of the elevator, which can be somewhat protective if the elevator car section has fallen to the bottom.

Laser Cladding Powder

Nickel Based Laser Cladding Powder

Ni base alloy powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has good wettability, corrosion resistance and high temperature self-lubricating effect, and is used in components with heat resistance, corrosion resistance and thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser cladding, the No means hardness of powder. Inconel 625 and 718 has good corrosion property under higher temperature, also widely used for laser cladding process.

Cobalt based Laser Cladding Powder

Cobalt-based alloy powder is the cemented carbide resistant to various types of wear and corrosion as well as high temperature oxidation. That is, the so-called cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based alloy is mainly composed of cobalt, containing a considerable amount of nickel, chromium, tungsten and a small amount of molybdenum, niobium, tantalum, titanium, Alloying elements such as lanthanum, and occasionally a class of alloys containing iron.

Co-based self-fluxing alloys have good high temperature performance and wear resistance and corrosion resistance, and are used in petrochemical power, metallurgy and other industrial fields where they are wear-resistant, corrosion-resistant and high-temperature resistant.

Iron based Laser Cladding Powder

The work pieces required for laser cladding and manufacturing in the actual industry are mainly carbon steel and cast steel. The Fe-based alloy is close to the base material in composition and has good wettability. The advantage of Fe base powder is lower cost and good wear resistant of cladding layer. As a result, it`s the most widely used for laser cladding process. It is suitable for parts that require local wear resistance and are easily deformed.

WC blended Laser Cladding Powder

Tungsten carbide blended with Ni alloy powder is the best choice for wear resistant work piece. This unique process can bring excellent wear, corrosion and high temperature resistant. Our blend powder can achieve different portion of WC from 35% to 60% without crack under suitable cladding parameter.

Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com