Range: pH 0.00~14.00pH 
Temp: -50°C~70°C (-58°F~158°F) 
Resolution: pH 0.01PH; 
Temp: 0.1°C (0.2°F) 
Accuracy: pH ±0.1PH 
Temp: ±1.0°C (±2.0°F) 
Battery: DC6V (with power adaptor) 
Temperature Compensation: 0°C~50°C 
Operating Temperature: 0°C~50°C 
Dimensions: 75mm×55mm×28mm 
Weight: 60g

Why Choose Us

Air-cooled Industrial Chiller

New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding
process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling.
They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surrounding factors. Therefore they
are necessary good equipments in modern industry.
1. Cooling temperature range 5-35 °C.
2. High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3. Tube-fin double condensers with excellent heat transfer and rapid cooling.
4. Stainless steel warm-keeping tank.
5. R22 refrigerant to be used for efficient cooling.
6. R407 environment-friendly refrigerant is optional to use.
7. Overload protection for compressor, pump and blower.
8. Independent Temperature Controller, anti-freeze protection.
9. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10. Warm-keeping design for all piping to avoid partial convection.
11. Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonic.

Introduction:
RCM-A series air-cooled Industrial Chiller are applicable for cooling moulds to reduce products molding cycle, also they are
available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries
with the need of cooling.

Features:
Cooling range 5~35°C.

Adopts stainless steel made insulated water tank and evaporator.

Equipped with anti-freeze thermostat.

R22 refrigerant is used as standard and optional R407 for efficient cooling.

Refrigeration loop controlled by high and low pressure switches.

Compressor and pump overload relays.

All adopt [COPELAND" US Brand compressors.

RCM-A series adopts fin condenser design without any need of cooling water for excellent heat transfer and rapid cooling.

Level meter of water tank is available as option.

Low pressure pumps are standard configurations, while middle or high pressure pumps are optionally available.

Air-cooled industrial chiller mould temperature controller schematic structure:

Screw Type Air-cooled Industrial Chiller

Air Chiller, Industrial Air Cooled Chiller, Air-Cooled Water Chiller,Industrial Chilling Machine for Mold

Ningbo Beilun Rhong Machinery Manufacturing Co., Ltd. , http://www.rhongmachinery.com