Injection Molding Machine For Maker Pen
MYTAO precision injection molding machine is fully servo closed-loop precision control, and the back pressure consistency accuracy is as high as plus or minus 0.1%; the first multi-cavity vertical square side glue hot runner technology, multi-cavity vertical circular needle valve hot runner technology, high precision Modular manufacturing technology, no nozzle material production, material utilization rate 100%; four-axis synchronization of sol, injection, mold opening, ejection + hot runner mold injection molding production mode, high efficiency, high quality, and environmental protection
Save water and fuel. The system has high
efficiency, can effectively avoid the oil temperature rise, and the capacity of
the water cooling is reduced, and the heating range is reduced, thereby
reducing the replacement rate of the hydraulic oil. Through the follow-up
investigation of some pipe fitting manufacturers, it is found that the
equipment only needs to use cooling water for 10-20 days in the hot summer
within a year, and the amount of cooling water used is only 1/3 of the
traditional injection molding machine.
6. Lower noise. The main source of noise of
the servo injection molding machine is the power system. The power system
composed of the servo motor and the gear pump has very low noise due to its
working characteristics, so that the injection molding machine equipped with
this system has very low noise.
Injection Molding Machine For Maker Pen,Marker Pen Making Machine,Vertical Injection Moulding Machine,Desktop Injection Molding Machine Ningbo Rhea Machinery Co., Ltd. , https://www.mytao-global.com
1. Return Bender is a key equipment for Return Bender Production.
Return Bender connects two legs of hairpin bender by brazing process for heat exchange coil fabrication.Return Bender machine is high effecient for 5 pcs per cycle or 3 pcs per cycle according to different tubing size.
Structure features of return bender:
2.1 Return Bender is an equipment for fully automatic processing,after loading the coil tube,it can finish the sequence with automatically:Feeding→Clamping→Mandrel enter→Sprayer→Bending→Pull mandrel→Cutting→Unloading material→Reposition bending minor elbow of whole action.
2.2 Stock stand of Return Bender Motor Driven stock stand(same as tube cut off machine).
3. Main Electric Components:
3.1 Control system will be Japan OMRON PLC.
3.2 Pneumatic parts will be SMC.
3.3 Hydraulic parts will be Japan Brand Yuken.
Should any of this items be of interested to you please contact us.Thanks for your interesting in our Vertical Expander!
RETURN BENDER TECHNICAL SPECIFICATION:
1. High Precision & Efficiency
2. Tube O.D. 5MM ~ O.D.30MM for Option;
3. Output 2~5 Pcs Per Cycle  due to different Sizes;
4.Efficiency 10~14 Cycles Per Minute
More details please review: www.retamachine.com
The Return Bender machine is used to open, straighten, saw and bend coil copper pipe into return bend, mainly applied to air-condition condenser and evaporator, water heater, etc. It works with full automatic mode.
1. Return Bender is a key equipment for Return Bender Production.
Return Bender connects two legs of hairpin bender by brazing process for heat exchange coil fabrication.Return Bender machine is high effecient for 5 pcs per cycle or 3 pcs per cycle according to different tubing size.
Structure features of return bender:
2.1 Return Bender is an equipment for fully automatic processing,after loading the coil tube,it can finish the sequence with automatically:Feeding→Clamping→Mandrel enter→Sprayer→Bending→Pull mandrel→Cutting→Unloading material→Reposition bending minor elbow of whole action.
2.2 Stock stand of Return Bender Motor Driven stock stand(same as tube cut off machine).
3. Main Electric Components:
3.1 Control system will be Japan OMRON PLC.
3.2 Pneumatic parts will be SMC.
3.3 Hydraulic parts will be Japan Brand Yuken.
Should any of this items be of interested to you please contact us.Thanks for your interesting in our Vertical Expander!
RETURN BENDER TECHNICAL SPECIFICATION:
1. High Precision & Efficiency
2. Tube O.D. 5MM ~ O.D.30MM for Option;
3. Output 2~5 Pcs Per Cycle  due to different Sizes;
4.Efficiency 10~14 Cycles Per Minute
More details please review: www.retamachine.com
Return Bender Machine for Heat Exchanger Processing
Model NO.: reta machine
Type: Pipe End Forming Machine
Details: O.D. 5mm ~ O.D.30mm for Option
Speed: Efficiency 10~14 Cycles Per Minute
Trademark: RETA
Transport Package: Sea Worthy PA⪞ King
Specification: Output 2~5 Pcs Per Cycle due to different Sizes
Origin: China
Model NO.: reta machine
Type: Pipe End Forming Machine
Details: O.D. 5mm ~ O.D.30mm for Option
Speed: Efficiency 10~14 Cycles Per Minute
Trademark: RETA
Transport Package: Sea Worthy PA⪞ King
Specification: Output 2~5 Pcs Per Cycle due to different Sizes
Origin: China
The Return Bender machine is used to open, straighten, saw and bend coil copper pipe into return bend, mainly applied to air-condition condenser and evaporator, water heater, etc. It works with full automatic mode.