PC Hollow Sheet Line is applicable to produce PC,PP,PE hollow profile board. The products is used widely for building, decorating, advertisement laying, road noise isolation ,roofing and packing. PP hollow profile board can instead of carton which have feature like light weight, high strengthen, moisture-proof, antisepsis.
Machine part detailed introduction of PC hollow sheet production line/PE hollow sheet production line /PP hollow sheet production line
1. The vacuum calibrator featured with wear-resistance, dirty free and the lifting, falling and leveling for the forming plates is much easier to be controlled.
2. High speed screw, low energy consumption with high rotation speed to match gear pump and stable pressure; output capacity is 25% higher than other brand extrusion lines. because of special design of forming plates.
3. Special designed cooling system for all section of forming plates, and unique designed vacuum system for each section of forming plate.
4. Special designed temperature control oven with cross heat shrink forming, which is much easier to be controlled than other brand extrusion lines.
5. The softness of pull rolls could be customized on request to extend its stretch.
6. The air capacity of hollow sheet and low pressure could be adjusted and controlled slightly, which is easily to be controlled than any other brand extrusion lines.
7. Unique T-Die made by JC Times is specially designed for PP hollow sheet. The thickness of hollow sheet could be from 2mm to 10 mm with twin-wall. The ribbed between walls could be rectangular and diagonal shape.
8. Anti-UV co-extrusion layer could be one sided or two sided, outer surfaces could be sandy or glossy according to configuration requirement.High percentage of recycled flakes could be mixed with the virgin materials.
Pc Hollow Sheet Line,Pc Hollow Sheet Machine,pc hollow sheet extrusion machine,pc pp hollow grid sheet production line zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com
Sanitary Butterfly Valves, no matter manually or automatically, can be used in most fluid product
Applications in food-processing,pharmaceutial and chemical industries.
1.OPERATING PRINCIPLES
The butterfly valves can be operated automatically throgh actuator or manually with the handle.
The handle blocks the valve in the "open" or "closed" position, certainly there are the other position available.
The actuator push piston of axial movement into 90 degree so that it controls butterfly valve.
2.TECHNICAL SPECIFICATIONS
Max.Pressure:10bar(DN-25/100)
8bar(DN-25/100)
Min.Pressure:0.2bar p.Abs
Operating temperature:-10ºC to +120ºC(EPDM)
3.DESIGN AND FEATURES
Compact and robust design
Available in sizes DN25/1" to DN150/6"
The size of muti-position handle up to DN100/4"
The size of pull handle up to DN125/150/6"
Manual handle, pneumatic actuator and electric actuator can be exchangeable with each other
Low pressure losses
The valve body can be changeable with any kind of connection
4.MATERIAL
Butterfly plate:ANSI316L/304(forged)
Valve body:ANSI316L/304(forged)
Water and gasket:EPDM which conforms to FDA 177.2600
Handle:ANSI304/PP
Surface finishing:Ra=0.8
5.OPTIONS
The material of gasket contains NBR,VMQ or FPM, which all confirm to standard of FDA 177.2600
Connection:Weld, clamp, thread,single weld singlethread, flange
Handle:Two-position handle, three-position handle, four-position pull rod handle, multi-position plastic handle  and multi-position stainless steel handle, DIN,SMS,RJT,ISO,IDF,3A
Actuator:Pneumatic stainless steel actuator, pneumatic alumium actuator, electric actuator
Control:Position sensor
Â
Size
D1
D
L
L1
H
KXK
1/2"
25.4
78
66
126
86
8x8
3/4"
25.4
78
66
126
86
8x8
1"
50.5
78
66
126
86
8x8
1.1/4"
50.5
78
66
126
86
8x8
1.1/2"
50.5
86
70
126
90
8x8
2"
64
102
76
133
102
10x10
2.1/2"
77.5
115
80
144
109
10x10
3"
91
128
84
144
115
10x10
4"
119
154
104
144
131
11x11
5"
144.5
185
122
220
146.5
11x11
6"
167
215
146
220
161.5
11x11
8"
217.4
285
166.8
284
199
14x14
Â
Qingdao kingway Industries Co., Ltd. is one of the experienced manufacturerS & exporters
 specialized in producing and exporting kinds of valves, fittings,flanges and some other steel products.
Our products have been well exported to Canada,USA, Australia, Middle East, Southeast Asia
,Europe, South Africa and so on
Â
Our advantage
1.We have more than 20 years experience in import and export
2.We Have Own Export License
3.We can do OEM and ODMÂ products
4.The stable delivery time in 1-2 month
5.We market our products around the world---Canada,USA, Australia, Middle East, Southeast Asia
,Europe, South Africa and so on
6.Our price and quality is really competitive
Sanitary Butterfily Valve with Multi-Position Handle, Clamped
Model NO.: ST-V1022
Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Forge Welding
Application: Industrial Usage, Water Industrial Usage, Household Usage
Size: 1/2"-4"
Trademark: CimAra, OEM
Transport Package: Cartons in Pallets
Specification: BS, DIN, ANSI, JIS
Origin: Shandong
HS Code: 8481804090