Ship Launching and Lifting Rubber Airbag

Model NO.: XC201504230078
Engine Type: Outboard
Usage: Ship Launching, Drifting
Certification: BV, ISO9001, CCS, CCC
Capability: Water Rubber Hose
Trademark: XinCheng
Specification: GB/T3837 ISO9001 2008 CCS
Origin: Qingdao
HS Code: 401695
Marine airbag technology for upgrading and launching is a technical method that a ship finishes upgrading and launching through an airbag. The ship launches by the technology as follows: To inflate hoisting airbag and properly move the ship under the traction of winch and wire rope to finish launching. When the ship goes up, rolling airbag should be used firstly, and after positioning, the airbag is hoisted to cushion. The fundamental principle of ship launching and upgrading is to inflate the airbag under low pressure and bear in large area.

Standard specifications of xincheng Ship Launching Airbags
Diameter (D): From 0.8m to 2.0m.
Effective Length (EL): From 6m to 18m.
Total Length (TL): From 7m to 19.5m
The above specification only is our standard specification arrange. Other specification of ship launching airbags also available upon clients' request.
Ship Launching and Lifting Rubber Airbag
Application:
1. Shipwreck salvage.
2. Floating bridge and dock construction.
3. Rescue and remove of wrecked ship.
4. Can be used as pontoons for supporting docks and other floating structure.
Ship Launching and Lifting Rubber Airbag
Ship Launching and Lifting Rubber Airbag
We are a manufacture of airbag, the raw material also manufactured by ourselves, the best quality at the reasonable price. In addition, We promise that the product can be returned due to quality problem within one year; And we provide maintenance technology for free and the required raw material

wei fen zu

CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.carbongraphitepart.com