The trap is suitable for steam pipe main pipe, pipe network heat tracing, meter heating, life heating, and heating equipment that allows high-temperature condensate to be drained. The utility model has a wide application range. Article source/992010715104239.html
Aluminum Composite Panel is aluminum and pvc composite product.It is widely used in decoration area.It has following advantages:
1. Light weight; the density of aluminum is 2.73g/m3, only 1 / 3 of that of steel. Acm Panels,Acp Panel,Aluminum Composite Panel,Aluminium Composite Sheet Trumony Aluminum Limited , https://www.szaluminumpipe.com
The bimetal temperature switch trap is driven by the bimetal temperature sensing element to actuate the valve core to open and close the valve. When the device has just started, low-temperature condensate water appears in the pipeline, the bimetal is flat, and the valve plug is in the open position under the spring force. As the temperature of the condensate rises gradually, the bimetal temperature sensing element begins to flex and deform and pushes the valve core toward the closed position. The trap closes completely before the condensate reaches saturation temperature. There is always high-temperature condensate in front of the valve, no steam leakage, and good energy-saving effect.
2. High strength; high strength can be achieved by composition configuration, processing and heat treatment.
3. Corrosion resistance; it has the ability of self rust prevention, and the formed oxide layer can prevent metal oxidation and corrosion, and has good acid and alkali resistance.
4. Various and beautiful surface treatment. It can be used for anodizing, electrophoresis, chemical treatment, polishing and painting.
5. Good plasticity and easy processing;
Steam trap consisting of bimetal temperature sensing elements
The bimetal temperature switch trap is a sturdy trap in thermostatic traps. Its advantages are: not afraid of water hammer, high pressure, small size, light weight, not afraid of freezing, can automatically discharge air, any position can be installed; back pressure rate is greater than 80%.