(1) If the measured liquid is, then the vortex flowmeter should be installed where the measured medium should be completely filled.
(2) When the vortex flowmeter is to be installed on a horizontally laid pipe, then the influence of the temperature of the measured medium on the measurement result, such as the influence on the transmitter, should be considered, which will affect the final The accuracy of the measurement results.
(3) If the vortex flowmeter is to be installed on a vertical pipe, if the gas is measured, then the fluid can take any flow direction. If the liquid is measured, then the flow of the liquid at this time It should be a flow from the bottom up.
(4) The vortex flowmeter should be installed in a stable place, not near the vibration source, away from the vibration.
(5) Install a degasser when it is predicted that gas will be present in the liquid being measured.
(6) The vortex flowmeter should be installed where it will not cause vaporization of the liquid.
(7) The difference between the inner diameter of the straight pipe section before and after the vortex flowmeter and the inner diameter of the flowmeter should be less than 3%.
(8) Where there is a possibility of damage to the detecting element, then the vortex flowmeter installed in the pipeline needs to pay attention to the front and rear shut-off valve and the bypass valve, and the plug-in vortex flowmeter should be installed with the cut-off ball valve.

Pet Plastic Parts

Dongye Precision Injection Molding Co., Ltd. has advanced equipment, strong technology and manufacturing process, and has more than 20 years of injection molding expertise, especially in plastic injection molding, we can provide excellent service to meet all your molding parts requirements. Our equipment and technical capabilities will exceed your expectations in service, quality and value. We currently have a wide range of molding equipment from 50 tons to 360 tons of plastic injection molding, including horizontal and vertical versions. In addition to our molding machines, we also have temperature controllers and robotic part extractors, which also help our customers save money. Our company has no existing products to sell, but we can produce and design products according to customers' needs. 1. Specializing in the production of injection molds, plastic accessories. 2. According to customer demand exact quotation. 3. We provide design services for the completion of the project. 4. Surface treatment: sliding screen, polishing, sandblasting, heat treatment, painting, powder spraying, anodizing, 5. Provide assembly service, assist to follow up outsourcing parts. 6. Plastic products: medical facilities, auto parts, sports equipment parts, home appliances parts, electronic equipment parts, agricultural Plastic Parts, industrial plastic parts, plastic toys, etc. 7. High-quality export of Injection Molding Parts and moulds, while buying our products will also enjoy our superior after-sales service.

Pet Plastic Parts,Plastic Injection Molding For Plastic,Plastic Injection Molding Mach,Pp Plastic Injection Molding

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com