Antiwear Hydraulic Oil Additive,Multifunctional Gear Oil Additive,Engine Coolant Additive,Compressor Oil Additive Package Liaoning Yeboon Lubricating Oil Manufacturing Co.,Ltd. , https://www.lygearoil.com
The penetration rate of LED lighting in the steel mill lighting market is very low
Under the concept of low-carbon energy-saving and environmental protection, the demand for LED lighting in this segment of the steel mill is very strong. However, due to the special application environment of the steel mill, the application of LED lighting products is exactly how the designers of this market segment What kind of confusion exists in my heart? Baosteel Engineering is a flagship company established by Baosteel to build a centralized and professional international first-class engineering and technical service provider based on the absorption and integration of relevant engineering technology and steel structure business and resources. Since the construction of Baosteel, Baosteel Engineering has planned, designed and managed thousands of projects, including the overall design of Pugang Relocation Luojing Project, Meigang Cold Rolling Project and Ningbo Baoxin Stainless Steel Project. Bao Haigang Engineering Technology Group Co., Ltd. General Manager Xu Hailong said that Baosteel Engineering Technology Group Co., Ltd. applied LED lighting products earlier, but still encountered some problems in terms of standards and selection. I hope to enter the design institute this time. Activities can build a certain relationship for everyone, and we also want to interact with the authority of the standard standards department. The requirements for this lighting segment of the steel mill were discussed in depth. According to reports, the division of steel plants generally includes four parts: iron making, steel making, steel rolling and plant roads. Ironmaking consists of three parts: raw material field, sintering and blast furnace ironmaking. Steelmaking also has two forms: electric furnace steelmaking and converter steelmaking. Rolling steel is the stage of steel forming, generally including profile plant, cold rolling mill, hot rolling mill, silicon steel. The film factory and other parts. Each part is different because of its production mode, functional structure and environment. The LED lighting fixtures required are different, but the general local lamps have good light source penetration, good heat dissipation, dust prevention and shock resistance. If the temperature is high and good seismic requirements are required, there are still some standards for LED lighting in tall buildings. Xu Hailong said. For this steel mill lighting market with great potential, the penetration rate of LED lighting is quite low. Lin Zhonglian, a senior engineer from Baosteel Engineering Technology Group Co., Ltd., also expressed their doubts as a designer in the application of LED lighting. Lin Zhonglian said that LED is still a new thing for their designers. The research is not very profound. The power and illumination of the design are used to convert the LED. How to meet the design requirements after the transformation cannot be judged, if some specific calculations If the problem is not clear, then the designer can only put the LED aside, and it is difficult to add the LED to the middle of the design over time. Moreover, the current LED lighting products are also uneven, color rendering index, color temperature instability, investment environment and other factors, but also to some extent hinder the application of LED lighting products. In the face of fresh LED lighting, the participating designers also reflected that, especially for some large-scale projects, they are not willing to face the accusations that may exist, so the designers of the design institutes are often conservative. Representatives from the company and the designers of Baosteel Design Institute held a heated discussion on topics of common interest such as stroboscopic, blue light hazard, and design manuals. Yang Lanfang hopes that the user can propose their own needs and provide them to the Alliance Application Promotion Committee. The alliance will work together with LED lighting companies to improve the design selection manual of the products, and promote the application of LED lighting in different market segments. Everyone generally responded that this event has set up a platform for communication and communication. I hope that there will be more opportunities for communication in the future to further expand the promotion and application of LED lighting products.