There is a risk of overcapacity in order to control the raw material Shanshan into the Juhua Kailan lithium battery

For the purpose of the company's capital increase and investment in Juhua Kailan, every investment treasure (micro signal: mjtzb2) had called Shanshan shares as an investor on the afternoon of October 24, and exchanged with a staff member of the company's securities department. . It is worth mentioning that, according to each investment treasure (micro-signal: mjtzb2), there is a risk of structural overcapacity in the current lithium battery raw materials. How should this problem be solved?

Lithium battery raw material overcapacity

For the purpose of the company's capital increase in Juhua Kailan, a staff member of the company's securities department said that the price of lithium hexafluorophosphate has been rising since last year. The company mainly made this investment decision from the perspective of the control of raw material supply.

Every investment treasure (micro signal: mjtzb2) noticed that due to the booming production and sales of new energy vehicles, the price of lithium hexafluorophosphate for lithium battery electrolyte has risen sharply since the second half of 2015. In just a few months, one ton of lithium hexafluorophosphate The price has increased from the initial tens of thousands to 400,000 yuan. Stimulated by the surge in the price of lithium hexafluorophosphate, major manufacturers have begun to expand production. With the gradual release of expansion capacity and the gradual decline in the heat of new energy vehicles since the second half of 2016, the risk of overcapacity has begun to emerge.

It is worth mentioning that as early as July of this year, every investment treasure (micro-signal: mjtzb2) has reported the risk of overcapacity of lithium hexafluorophosphate in the report that "the downstream of the lithium hexafluorophosphate capacity is over-selling." This risk has now become the consensus of many listed companies. In the announcement issued by Shanshan, it showed that with the surge in sales of new energy vehicles, the price of lithium hexafluorophosphate increased significantly after October 2015, and industrial capital has entered the industry. It is expected that with the new capacity in 2017. With the gradual release, the supply and demand of lithium hexafluorophosphate will change, and there may be some overcapacity at that time.

In addition, in the "Investor Relations Activity Record Form" previously disclosed by Polyfluoride (002407), Polyfluoride said in response to the question of the research object: At present, the price of lithium hexafluorophosphate is quoted at 400,000 yuan/ton, and supply and demand are stable. . In 2017, due to the dual impact of the growth of downstream demand and the increase in the supply of new projects, the relationship between supply and demand may change steadily.

It is worth noting that every investment treasure (micro signal: mjtzb2) in the process of communication with the above-mentioned Shanshan shares, also learned that not only lithium hexafluorophosphate, a variety of lithium battery raw materials including the positive electrode, the negative electrode and the electrolyte There is a risk of structural overcapacity. So how should this problem be solved?

Market is a relative structural excess

Since Shanshan has disclosed the risk of overcapacity of related products in the announcement, how is Shanshan shares considered for this part of the risk? The above-mentioned staff of Shanshan Co., Ltd. stated that the feasibility study (feasibility study) was carried out before the investment, and the project planning also considered the development prospects of the existing production capacity and future industries. It is impossible to wait for the market to get up, and then do related work. She also said that the risk is certain, but the key point is to see whether the products produced meet the market demand, because the market is a relative, structural surplus, not to say that all products are surplus.

For the risk of overcapacity in related raw materials, every reporter who has invested in Bao (micro-signal: mjtzb2) also consulted several insiders and found that they have a relatively consistent view on cracking the risk of overcapacity.

Relevant industry insiders said that the risk of overcapacity is related to the large-scale expansion plans of many companies, and on the other hand, it is related to changes in the new energy automobile industry. For example, at the beginning of this year, the China Association of Automobile Manufacturers predicted that the total sales of new energy vehicles in 2016 will reach 700,000 units. However, as of June this year, new energy vehicles sold only 170,000 units. Therefore, whether there is excess capacity in the future depends on the market demand for new energy vehicles. In addition, the investigation of new energy vehicle fraud has also lowered the temperature of the entire industry. To put it simply, whether there will be overcapacity will depend on the future development of the entire industry.

So, what is the way to resolve the risk of overcapacity in the current situation? Or, what factors depend on the development of the entire industry in the future? Regarding this issue, several industry insiders said that in the current situation, it is still necessary to look at the subsidy policy for new energy vehicles in the future.

Automatic 3D Fiber Laser Pipe Cutting Machine

Technical advantages:

1. Excellent and efficient processing: Five-axis linkage of the bus system realizes space leapfrog and flying cutting technology, and improves efficiency by more than 20-50%.

2. Pipe cutting system: user-friendly and easy to operate, with sufficient pipe process database.

3. Special bed design:reinforced integrated welding bed, after annealing and twice aging treatment, with good stability.

4. Simple and convenient maintenance: the front chuck has good sealing performance and is more durable against dust; The rear chuck blows air automatically, and the pipe wall is cleaner.

5. Automatic feeding rack(optional): realize automatic clamping, pushing and accurate feeding with fast cyclic feeding speed.

6. Good quality and high precision: front and rear full stroke precision pneumatic chuck, multi axis linkage at the same time, good cutting effect and high precision.

7. A15: Double chuck short tailing:the cutting head spans from the front to the back of the front chuck and cuts the last workpiece.The tailing ≥ 40mm can save more material costs.

8. Excellent processing performance: it adopts high rigidity thickened bed, with bus pipe cutting system and bus motor which has faster processing speed and higher precision.

9. Slag extraction system (optional): solve the problem that there is no residue on the inner wall of the pipe, eliminating the secondary vibration polishing process.

10. High efficiency feeding system (optional): high rigidity design of feeding rack, stable and fast feeding and refueling, and the cycle time is about 10 seconds.

Laser Cutting Machine Metal,Automatic Pipe Cutting Machine,Automatic Steel Pipe Cutting Machine,Tube Fiber Laser Cutting Machines

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.nbctkcutting.com