1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
4. Has connector to foot control, convenient for workers' operation.
5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
6. High duty cycle, may work continuously with high current.
7. Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.

Parameter/Specification
 

Model Item     Â	TIG 315P AC/DC
Voltage(V)	AC380V ±15%
Frequency(Hz)	50-60
Input Power(KVA)	8.3
No-load Voltage(V)	54
Current Range(A)	10-300
Rated Duty Cycle	60%
Applied Welding Rod(mm)	¢1.6-5.0
Pre-flow time(S)	2
Post-flow time(S)	0-10
Down slope(S)	0-10
AC Balance(%)	20-80
AC Frequency(Hz)	60
Pulse Frequency(Hz)	0.5-300
Power Factor	0.93
Efficiency(%)	85
Insulation Grade	F
Housing Protection Grade	IP21S
Weight(Kg)	30
(L*W*H)(mm)	535*360*460
Carton CBM(m3)	0.172
Specification
 Capacitor	470Uf/400V*6
MOSFET	TOSHIBA K3878*24
Output Rectifier	SL D92-02*24

                                     Front View 







                                                     Right View 








                                                  Left View 










                                                            Top View 











                                                                               Back View 








                                                                  Accessories








 

1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
4. Has connector to foot control, convenient for workers' operation.
5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
6. High duty cycle, may work continuously with high current.
7. Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.

Parameter/Specification
 

Model Item     Â	TIG 315P AC/DC
Voltage(V)	AC380V ±15%
Frequency(Hz)	50-60
Input Power(KVA)	8.3
No-load Voltage(V)	54
Current Range(A)	10-300
Rated Duty Cycle	60%
Applied Welding Rod(mm)	¢1.6-5.0
Pre-flow time(S)	2
Post-flow time(S)	0-10
Down slope(S)	0-10
AC Balance(%)	20-80
AC Frequency(Hz)	60
Pulse Frequency(Hz)	0.5-300
Power Factor	0.93
Efficiency(%)	85
Insulation Grade	F
Housing Protection Grade	IP21S
Weight(Kg)	30
(L*W*H)(mm)	535*360*460
Carton CBM(m3)	0.172
Specification
 Capacitor	470Uf/400V*6
MOSFET	TOSHIBA K3878*24
Output Rectifier	SL D92-02*24

                                     Front View 







                                                     Right View 








                                                  Left View 










                                                            Top View 











                                                                               Back View 








                                                                  Accessories








 

316 Stainless Steel Wire Mesh

Material:
Plain steel, stainless steel(304, 316, 316L), aluminum, copper, brass, bronze, etc.

Features:
Heat resisting,Corrosion resisting, Acid resisting

Applications:
Mainly used for filtering and sieving, extensively used in petroleum, chemical industry, enviroment protection, mine, airspace, paper-making, electronic, metallurgy etc.

Weave Type:
1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa.

2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction.

3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size.

4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size.

5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires.

316 Stainless Steel Wire Mesh,316 Stainless Steel Mesh,316 Stainless Mesh,316L Stainless Steel Wire Mesh

Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.shaiwanghaoxiang.com