The mold incubator can be used for the cultivation of bacteria and microorganisms, and these culture experiments need to be completed in a clean environment, so it is necessary to avoid the mold incubator from being contaminated, but what if the mold incubator is contaminated? Here is a brief introduction to the treatment method of mold incubator pollution. Treatment method one of mold incubator pollution: Treatment method two of mold incubator pollution: 1. Move the culture medium inside to another incubator for culture, and then verify the sedimentation bacteria against the mold incubator. Use the mold and colony plate to determine whether the incubator is contaminated. Mold incubators are commonly used equipment in laboratory culture experiments. Understanding the knowledge of equipment maintenance is as important as the use of equipment. In addition, in laboratory management, it is necessary to make good equipment maintenance specifications to ensure that these incubator equipment can operate normally and meet the needs of various experiments. Xiaomi Backpack and Ninetygo Luggage
Xiaomi Backpack,Ninetygo Luggage,Xiaomi 90Fun Luggage,Xiaomi Laptop Backpack
We are manufacturer of Xiaomi Backpack in China, if you want to buy Ninetygo Luggage,Xiaomi 90Fun Luggage,Xiaomi Laptop Backpack please contact us.
China Xiaomi Backpack,Ninetygo Luggage,Xiaomi 90Fun Luggage Manufacturer and Supplier
Xiaomi Backpack,Ninetygo Luggage,Xiaomi 90Fun Luggage,Xiaomi Laptop Backpack Shenzhen Newway Technology Co., Ltd. , https://www.sznewway.com
1. It can be wiped with 75% alcohol or wiped with 84 disinfectant.
2. Scrub with 70% ethanol, and then scrub with 0.1% Negermide. If you are not assured, use potassium permanganate and formaldehyde at a ratio of 1:1. Remember: If you smoke, please pay attention, leave immediately after mixing, and then seal the cell culture room, the taste is very pungent.
2. If the incubator is indeed contaminated, it can be disinfected directly in the incubator with ultraviolet lamps or fumigation (all layers and corners in the incubator are placed separately) until the sedimentation bacteria are verified as qualified.
3. In the later period, it is necessary to stipulate that the incubator should be disinfected internally and externally with 75% alcohol every week or half a month.
What to do if the mold incubator is contaminated (How to deal with the pollution of mold incubator)