A blended powder of tungsten carbide and Metal Alloy Powder can be used for laser cladding, a process used to deposit a layer of material onto a substrate using a laser beam. This blended powder is typically used as a feedstock material for laser cladding applications where high wear resistance and hardness are required. WC Blend,Blended Powder,High Hardness Powder,Blended Coating Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvaf.com
Tungsten carbide is a hard and wear-resistant material that is commonly used in cutting tools, mining equipment, and other high-wear applications. It has excellent thermal conductivity and high melting point, making it suitable for laser cladding processes.
Metal alloy powders, on the other hand, are often added to the Tungsten Carbide Powder to enhance certain properties or tailor the characteristics of the final cladding layer. These metal alloys can include nickel, cobalt, chromium, or other elements, depending on the specific requirements of the application.
The blended powder is typically prepared by mixing the tungsten carbide and metal alloy powders in the desired ratio. This mixture is then fed into a laser cladding system, where it is melted using a high-power laser beam. The molten powder is rapidly solidified onto the substrate, forming a dense and wear-resistant cladding layer.
The resulting cladding layer can have excellent hardness, wear resistance, and thermal conductivity, making it suitable for various applications such as tooling, wear parts, and surface protection. The specific properties of the cladding layer can be adjusted by varying the composition and ratio of the tungsten carbide and metal alloy powders in the blend.
Overall, the blended powder of tungsten carbide and metal alloy powder offers a versatile and customizable solution for laser cladding applications, providing enhanced wear resistance, hardness, and other desired properties to the final cladding layer.
Where are the functional features of the swing gate product?
The swing gate is generally called the flapping door in the rail transit industry. The shape of the blocking body (swing pendulum) is a plane with a certain area, perpendicular to the ground, and is blocked and released by rotating the swing. The material of the blocking body is commonly used in stainless steel, plexiglass, tempered glass, and some also use metal plates to outen special flexible materials (to reduce the impact of pedestrians).
Product features:
1) It has fault self-test and alarm prompt function, which is convenient for users to maintain and use;
2) The running status of the device can be programmed online through the built-in small push panel on the main control board;
3) Anti-collision function, when the resistance is blocked during the swing arm reset, the motor will automatically stop within the specified time.
Work, and the intensity is small;
4) Anti-shock function, the swing arm is automatically locked when no open signal is received;
5) The swing arm is synchronously adjustable (for double swing);
6) With automatic reset function, the system will automatically cancel the user when the switch is not open within the specified time after the switch is turned on.
Permission of this passage;
7) The power is off normally to meet the requirements of fire management;
8) It can be connected with a variety of card reading devices to receive relay switch signals;
9) Two-way pendulum, single and two-way control personnel entering and leaving;
10) Remote control and management can be realized directly through the management computer;
11) Delay automatic reset, the standard is automatically reset 5 seconds after turning on;