Electric Plunge Router,Hand Hould Power Tools Woodworking Router    

Product Description

The Electric Router gives you all of the functionality of a fixed router--and much more. Not only can it create decorative edging like a fixed router, but its unique construction allows you to start work in the middle of a piece of wood, rather than at the edge, which lets you create cut-outs, inlays, and more for stunning results. With its powerful 10 Amp, variable speed motor (6000 to 26,000 RPM), this electric router gives you superior power for maximum performance, and its gradual start function gives you optimum control over the tool for precise results and safety. The tool is also built for convenience, with a specially designed base that allows for improved visibility, an easy-to-use depth scale to ensure better accuracy, and a spindle lock for straightforward, simple bit changes. And with its trigger switch with lock-on button and its contoured chip shield, you'll be both more comfortable and safer while you perform your work. The router comes with a 1/4-inch collet and wrench and an adjustable parallel edge guide.

Advantage

1.Equipped with an improved collet chuck for maximum hold and bits can be easily changed
2. Dust guide diverts dust and debris away from the work piece and user
3. Elastomer covers the handles to reduce transfer of vibration and prevent slippage
4. Soft start motor for reducing torque during start up
5. Variable speed dial is conveniently so the user can finely adjust the rotation speed without removing a hand or eyes from the work piece

Operation of electric woodworking router

Set the milling depth

1. Ensure that the clamping lever is locked down. If it is loose turn it anti-clockwise until it is locked.

2. Place the device on the work piece to be worked upon.

3. Turn the step stop until it locks into the lowest position.

4. Loose the lock screw.

5. Loose the clamping lever by turning it clockwise and pushing the device down until the route bit touches the surface of the work-piece.

6. Lock the clamping lever in place by turning it anti-clockwise.

7. Push the depth stop down until it reaches the lowest position of the step stop. Move the index indicator to the position "0" on the dial milling depth adjustment.

8. Adjust the depth stop to the desired depth, tighten the lock screw. After the index indicator should no longer be adjustable.

9. Loose the clamping lever and lead the device back up.

Technical parameter

Our Service

a.1 year warranty
b.1%-2% Spare Parts
c. OEM & ODM are welcome
d. trial orders are available
e. Reply within 24 hours

Packaging & Shipping

Every piece will be  packed in a small packing of  box or cartons which depend on the requirment.


FAQ

Glass Bottle

Glass Bottle,Clear Glass,Glass Dropper,Square Glass Bottle

XUZHOU NORTH STAR PACKING PRODUCTS CO.,LTD , https://www.nspglassbottle.com