Dragon Bearing characteristics 1. Low friction Servo Bearing dry friction coefficient is half of the water-lubricated bearings in general, Servo's low friction, but also wear-resistant, lower starting torque, the main factor to eliminate adhesive wear. 2. Long service life, anti-wear ability Because of the elastic nature of Cyrillic, when the frictional particles enter the bearing, they are pressed into the raceway, and then, with elastic force, they roll along with the shaft and fall out of the water tank, and do not get stuck on the bearing to form another friction The source, therefore, minimizes bearing and shaft wear 3. Dry start Dragon can be dry in a certain period of time. Approximately 1-2 minutes without prior lubrication with water, the bearings will not be damaged if there is an interruption in pumping. Sealed forced lubrication of bearings, water lubrication system into the dragon, you can greatly avoid the lubrication system failure, resulting in bearing damage 4. Easy to process 5. Increase the efficiency of water pump 6. Overload capacity 7. High elasticity, toughness 8. Easy to install 9. Easy to modify 10. Dragon Bearing, there is no limit on the number of years of life 11. Water, oil lubrication can be Dragon is not up, is the best oil and water mixed environment bearings. Conversely, the metal used in lubricating oil, can not be washed away by water. Instead of metal bearings, it is not allowed to be oil pollution, and there are oil and other applicable issues.
Selling large quantities of synthetic rubber and specialty rubber. Multiple global manufacturers have cooperated with us at affordable prices.
Synthetic Rubber,Rubber Products,Styrene Butadiene Rubber,Polybutadiene Rubber Jiangsu Junfeng New Material Co., Ltd. , https://www.junfengtirebladder.com
A brief analysis of the service characteristics of vertical circulation pump Serion bearings