The rapid recovery of traffic on the scene of the accident depends on the professional emergency repair of the accident wrecker. Although it has always played a low-key role in the smooth passage, it is often due to emergency operations and swift action. Therefore, it is very important that the performance of the wrecker is always maintained at the best standby state. All this is based on the correct care when using it.

First, before the accident wrecker is present, it is necessary to fully understand and analyze the wrecker site and the wagons to be cleared. Select an accident wrecker that matches the model and dispatch it for repair. When driving to the scene, pay attention to the separation of the vehicle power device

Second, after the accident wrecker has gone to the scene of the accident, it is necessary to pay attention to observing the traction direction of the dragging object, and press the specified sign of the action sign to start slowly and steadily. If the to-be-cleared object needs to be hoisted, the winch clutch must not be separated when manipulating the boom, winch or other mechanical components. Suspended wire should be provided with a sufficient length of safety, the minimum standard is five times the circumference of the drum of the winch drum. It is best not to change the length and other parameters of the boom during traction, and to use a winch wire to slowly roll up the traction. Pay attention to the fact that the jib should not be overloaded so as not to cause damage to the jib and cause vehicle safety problems.

Third, if you use the lift arm drag, you should pay attention to the choice of lift position should be selected in the most stable place. At the same time try to reduce the length of the lifting arm before driving. The lift should be fastened to the fixed part of the car body with a strong strap or chain, thus avoiding the unstable factors such as bumps or brakes when dragging, causing the accident car to disengage from the bracket and causing the vehicle and the wrecker to both Different degrees of damage occurred. When driving, it is necessary to avoid sudden changes in the emergency brakes, and try to slow down and steer as much as possible.

4. If the wrecker has been cleaned up for too long, the hydraulic oil temperature should be monitored at all times. Especially when the sun is exposed to direct sunlight, the temperature of the hydraulic oil can easily rise to more than 60 degrees. During the operation, attention should be paid to lengthening the rest interval or adopting various cooling methods to keep the hydraulic oil temperature at a normal value.

The use of accident wreckers requires the operator to be familiar with more details of the operation. Only in this way can the wrecker be able to meet the speed and safety of the wrecker.

Main USES:this series of machine tools is mainly used for Groove Grinding of Self-aligning roller bearing.1, CNC ac servo control system (PLC or CNC system), color screen display, "man-machine dialogue" and with fault self-diagnosis function.Equipped with electronic pulse handwheel.2. Adopt cross guide rail.3. The work-piece feed pallet and grinding wheel running pallet are driven by servo motor.4. External cylindrical cutting grinding of grinding wheel.5, electromagnetic centerless fixture, remote control control demagnetization controller, in the operation panel to adjust the size of the magnetic force.6. The workpiece shaft adopts sleeve workpiece extraction,Frequency control of motor spee.

CNC Thrust Bearing Grinding Machine

Thrust Ball Bearing,Cnc Thrust Besring Grinding Machine,Thrust Bearing Grinding,Thrust Bearing Ring

Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com