1. Every spindle can make bigger power. 2. Electric pumping oil to lubricate working table.
Forging
Parts:
By forging can eliminate the casting
defects such as loose metal produced in the smelting process at the same time,
the microstructure is optimized, the metal flow and preservation of the
integrity of the mechanical properties are generally better than the same
materials forgings castings. Mechanical load is high, the important parts of
harsh working conditions, in addition to the plate shape is simple by rolling,
welding material or, by forging.
Temperature
Deformation:
Steel began the recrystallization
temperature about Wuxi turbine blade biggest blow force of 35 thousand and 500
tons of screw press and Wuxi turbine blade biggest blow force of 35 thousand
and 500 tons of screw press is 727 DEG, 800 DEG C but generally used as the
demarcation line, is higher than 800 DEG C hot forging; between 300 to 800 DEG
C called warm forging or semi hot forging, for forging at room temperature is
called cold forging. For most industries are forging hot forging, warm forging
and cold forging, mainly used in automotive, general machinery parts such as
forging, warm forging and cold forging can be effective in saving material.
Raw
Material Applicable:
The forging material is mainly carbon steel
and alloy steel components, followed by aluminum, magnesium, copper, titanium
and its alloy material. The original state of a bar, ingot, metal powder and
liquid metal. The cross-sectional area of metal in the cross sectional area and
deformation before and after the ratio as the correct choice of forging ratio.
Forging ratio, heating temperature and holding time reasonable, reasonable
initial forging temperature and forging temperature, deformation and
deformation velocity reasonably to improve product quality, reduce the cost of
a great relationship. The general small and medium sized forging material as
blank with circular or square rods. Grain structure and mechanical properties
of the bar uniform well, the shape and dimension accuracy, good surface
quality, easy to mass production. As long as the heating temperature and
deformation conditions of reasonable control, without large forging can forged
excellent forgings.
Mainly speaking,based on the three
different material,we can make steel forging farts,copper alloy Forging Parts
and aluminium alloy forging parts.
Processing:
Different forging method have different
processes, the process of hot forging is the longest, the general order:
forging billet heating; forging; forging billet preparation; forging; trimming;
punching; correction; intermediate test, test size and surface defects of
forging; forging heat treatment, with in order to eliminate forging stress,
improve metal cutting performance; cleaning, mainly to remove the surface oxide
skin; correction; check, general appearance and hardness inspection after forging,
forging an important even after the chemical composition analysis, mechanical
properties, residual stress test and nondestructive testing.
Forging Parts Forging Parts,Steel Forging Parts,Copper Forging Parts,Aluminium Forging Parts VESTA Motoring Ltd , http://www.vesta-industry.comAuto Woodworking Six Spindles Wood 4 Side Planer
PRODUCT DISCRIPTION
Model
HC620
HC520
Max Working Width
20-200mm
20-200mm
Max Working Thickness
8-125mm
8-125mm
Min. Working Length
250/590mm
250/630mm
Feeding Speed
8-33m/min
8-33m/min
Spindle Diameter
40mm
40mm
Bottom Spindle Speed
6800r/min
6800r/min
Cutter Diameter
1st Bottom Cutter
125mm
125mm
Left And Right Cutter
108-200mm
108-200mm
1st Upper Cutter
108-180mm
108-180mm
2nd Upper Cutter
108-180mm
/
2nd Bottom Cutter
108-200mm
108-200mm
Machine Power
1st Bottom Spindle
5.5kw
5.5kw
Right Spindle
5.5kw
5.5kw
Left Spindle
5.5kw
5.5kw
1st Upper Spindle
7.5kw
7.5kw
2nd Upper Spindle
5.5kw
/
2nd Bottom Spindle
5.5kw
5.5kw
Feeding Power
4kw
4kw
Lifting Power
0.75kw
0.75kw
Total Power
39.75kw
34.25kw
Voltage
380v 50hz 3phase
Dust Collection Port
120mm*6pc
120mm*5pc
Machine Size
4000*1780*1750mm
3500*1780*1750mm
Machine Weight
4400KG
3600KG
Optional Function:
3. Every spindle adopts brake system.  4. Every spindle motor starts by Y Delta.
5. Out-feeding table.Â
PRODUCT DETAILS
Machine Specification:
1. This machine adopts an overall casting body, which has stable performance and high rigidity.
2. Fully-enclosed safety cover and door opening protection, low noise, safety and environmental protection.
3. The main shaft is precision-machined, balanced, and assembled accurately, and its operation is stable and precision is good.
4. The working table surface adopts special materials and special heat treatment, hard chrome plating, wear-resistance.
5. Feeding system front and middle and rear use three cylinder press, stable pressure, easy adjustment.
6. All the cutter shafts are driven individually, cutting strong and powerful.
7. Feeding belt adopts stepless transmission and universal joint transmission, stable and reliable, easy to operate.
8. All electrical components and transmission components adopt imported components from international brands, and their performance is stable.
DELIVERY&PACKAGE:
Generally we will take care of your machine packages well.
Firstly our worker will make sure your machine clean before package, then add Stretchy film for the whole machine and spare parts for sweet protection, at last we will make export standard strong plywood case package according to your needs.
Why Choose Us:
1. We have our own woodworking machinery factory.
2. As a professional manufacturer, we have 14 years factory experience for woodworking machinery.
3.Our products are widely sold in made-in-china.
4. More and more customers in the world are using our machine, we received many good feedbacks or reviews from lots of countries.
5.We have perfect after-sales service.
  a. Machine guarantees 12 months.(The host machine warranty for one year, the wearing parts is no guarantee, but support will be provided)
  b. 24 hours technical service by email or calling.
  c. English manual and operation video.Â
  d. Engineers available to service machine overseas, also welcome to our factory to learn the installation and use of the machines.
  e. Regularly follow-up by email or cellphone
  f. Expanding your production or upgrading machine in the future, professional solution will be provided.Â
6. We are looking for Good customers like you! and Distributor or Agents Wanted!!!Â
   Learn more about us on SNS
Auto Woodworking Six Spindles Wood 4 Side Planer
Model NO.: HC620
Cutter Shaft: 6
Spindle Speed: ＞5000rpm
Process Type: Heavy Processing
Certification: CE, ISO
Name: Four Side Planer
Working Thickness: 8-125mm
Feeding Speed: 8-33m/Min
Spindle Diameter: 40mm
Total Power: 39.75kw
Weight: 4400kg
Dust Port Diameter: 120mm*6PC
Dimension: 4000*1780*1750mm
Trademark: HICAS
Transport Package: Standard Packing or Packing According to Customer
Specification: 4000*1780*1750mm
Origin: Qingdao
HS Code: 84659500
SAMPLE: