For Whole Span Assembly,Span Assembly,Bridge Building Machinery Overhead Crane,Gantry Crane,Working Platform Co., Ltd. , http://www.nscrane.com
Under-Water Pelletizing System for Pet Flakes Recycling Pelletizing Line
Typical features:
Fine-hard alloyed die section, Hardness between HRC88-90
Well wear-resistance specific alloyed blades equipped, hardness between HRC70-75;
No-contact conduction heating method applied in the die section heating system, instead of heating stickers method, to guarantee die section with uniform heating performance;
Pneumatic device to control the blades well touching on the die section, automatically adjustment, to guarantee blades system cutting stably.
One key booting system, which make the whole system running conveniently;
1. Applicable to:
Waste film,filament,flakes,and regrinds of PET
2. Description
Twin screw extruder recycling & pelletizing system are applied to the waste materials,which needs high processing performance of melting,volatilization,filtering etc.,mainly works for the job of PET scraps recycling and re-pelletizing.
To slow down IV value reducing during PET scraps recycling,not only impurities,such as PVC content,moisture,etc.,but also precise recycling system and reliable equipment configurations are necessary to put in the solution.
3. Pre-processing equipment required according to the condition of various PET scraps;
Special designed compactor applied to handle low bulk density scraps,such as film,filament,etc
Pre-crystallization system is required to pre-dry PET regrinds,flakes to guarantee final productions quality.
Recycling machine factorys (ACERETECH)
ModelACT series
Feeding
Converyor belt, nip roll feeder
Extruder
Twin screw
Cutting Type
Strands pelletiziing system
Cooling Type
Water cooled
Product
Plastic pellets/granules/resins
Material Type
Waste film,filament,flakes,and regrinds of PET
Material Shape
Film,filament,flakes,regrinds
Video
Â
Website
http://www.aceretech.com
Machinery Size
Data of Compactor
Data of twin screw extruder
Throughout rate(Kg/hr)
Efficiency Volume(Liter)
Motor power(Kw)
Diameter of screw(mm)
L/D
Motor power(Kw)
ACT800/75
800
90
71.2
36
132
350-450
ACT1000/95
1000
110
91
36
200
500-600
ACT1200/95
1200
132
91
36
250
600-800
4.Advantage of our system
a.Water-cooling temperature controls for process section,to guarantee precise control of process temperature.
b.Strands pelletizing system set into the recycling system.
c. Arrangement for inspection, installation and testing work
d. Long-term service:We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide
e.Good quality :Â Strict quality control ,good reputation in the market;
f.Service : service of our machine ,service of machine customer have already;
g.Delivery : near shanghai seaport;
After sale service for the plastic pellets production system
1. Technical documents
All labels on PP PE pellets production system and lay-out drawings, Electrical diagram, User Manual, will be in English. We should send all necessary files to the buyer since the third week since project execution. All documents in hard copies should be also shipped with machines together.
2. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer's factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.
b. We will prepare for visa application for their engineers, who are responsible for guide of pp pe pellets production system installation and testing at the Buyer's factory.
c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD100 per day for each engineer.
d. Engineer will give free training lessons to labors in buyer's factory.
3. Quantity and quality guarantee
a. Quantity/Quality Discrepancy to destination port during transportation:
In case of quality/quantity discrepancy to destination port in transportation, customer should file claim within 30 days after the arrival of the pp pe pellets production system at port of destination. We will be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office
b. Guarantee period and after-sales services: 12months since installation finished in buyer's factory.
During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
Under-Water Pelletizing System for Pet Flakes Recycling Pelletizing Line
Typical features:
Fine-hard alloyed die section, Hardness between HRC88-90
Well wear-resistance specific alloyed blades equipped, hardness between HRC70-75;
No-contact conduction heating method applied in the die section heating system, instead of heating stickers method, to guarantee die section with uniform heating performance;
Pneumatic device to control the blades well touching on the die section, automatically adjustment, to guarantee blades system cutting stably.
One key booting system, which make the whole system running conveniently;
1. Applicable to:
Waste film,filament,flakes,and regrinds of PET
2. Description
Twin screw extruder recycling & pelletizing system are applied to the waste materials,which needs high processing performance of melting,volatilization,filtering etc.,mainly works for the job of PET scraps recycling and re-pelletizing.
To slow down IV value reducing during PET scraps recycling,not only impurities,such as PVC content,moisture,etc.,but also precise recycling system and reliable equipment configurations are necessary to put in the solution.
3. Pre-processing equipment required according to the condition of various PET scraps;
Special designed compactor applied to handle low bulk density scraps,such as film,filament,etc
Pre-crystallization system is required to pre-dry PET regrinds,flakes to guarantee final productions quality.
Recycling machine factorys (ACERETECH)
ModelACT series
Feeding
Converyor belt, nip roll feeder
Extruder
Twin screw
Cutting Type
Strands pelletiziing system
Cooling Type
Water cooled
Product
Plastic pellets/granules/resins
Material Type
Waste film,filament,flakes,and regrinds of PET
Material Shape
Film,filament,flakes,regrinds
Video
Â
Website
http://www.aceretech.com
Machinery Size
Data of Compactor
Data of twin screw extruder
Throughout rate(Kg/hr)
Efficiency Volume(Liter)
Motor power(Kw)
Diameter of screw(mm)
L/D
Motor power(Kw)
ACT800/75
800
90
71.2
36
132
350-450
ACT1000/95
1000
110
91
36
200
500-600
ACT1200/95
1200
132
91
36
250
600-800
4.Advantage of our system
a.Water-cooling temperature controls for process section,to guarantee precise control of process temperature.
b.Strands pelletizing system set into the recycling system.
c. Arrangement for inspection, installation and testing work
d. Long-term service:We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide
e.Good quality :Â Strict quality control ,good reputation in the market;
f.Service : service of our machine ,service of machine customer have already;
g.Delivery : near shanghai seaport;
After sale service for the plastic pellets production system
1. Technical documents
All labels on PP PE pellets production system and lay-out drawings, Electrical diagram, User Manual, will be in English. We should send all necessary files to the buyer since the third week since project execution. All documents in hard copies should be also shipped with machines together.
2. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer's factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.
b. We will prepare for visa application for their engineers, who are responsible for guide of pp pe pellets production system installation and testing at the Buyer's factory.
c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD100 per day for each engineer.
d. Engineer will give free training lessons to labors in buyer's factory.
3. Quantity and quality guarantee
a. Quantity/Quality Discrepancy to destination port during transportation:
In case of quality/quantity discrepancy to destination port in transportation, customer should file claim within 30 days after the arrival of the pp pe pellets production system at port of destination. We will be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office
b. Guarantee period and after-sales services: 12months since installation finished in buyer's factory.
During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
Under-Water Pelletizing System for Pet Flakes Recycling Pelletizing Line
Model NO.: Under-Water Pelletizing Machine
Output Capacity: 350~800kg/Hr
Electric Components: ABB,Schneider,Ls,Omron,by Customized
Application: Film, Filament, Flakes, Regrinds
Voltage: 380V 50Hz or by Customized
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Zhangjiagang City, Jiangsu, China
HS Code: 8477209000
Model NO.: Under-Water Pelletizing Machine
Output Capacity: 350~800kg/Hr
Electric Components: ABB,Schneider,Ls,Omron,by Customized
Application: Film, Filament, Flakes, Regrinds
Voltage: 380V 50Hz or by Customized
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Zhangjiagang City, Jiangsu, China
HS Code: 8477209000