Rubber Chemicals,Chemicals Cbs Cas 95-33-0 Rubber Vulcanization,Accelerator Cbs Powder Hs Code,Cas 95-33-0 Rubber Accelerator Cbs Cz SHANDONG MINGDE CHEMICAL CO.,LTD. , https://www.sdmingdechem.com
Waste tire recycling rubber cutter machine/used tire cutting machine is to crush waste tires into rubber powder in different sizes. The final rubber powder is with purity of 99.99%, can be used to make rubber tiles, rubber mat, asphalt, waterproof material, filler of artificial grass.
The working process of waste tire recycling machine:
Waste tire - Tire de beader- whole tire cutting - tire shredder - Rubber crushing - magnetic separator - fiber separator - Rubber powder   
Specification of used tire cutting machine: Â
First step: Tire de bearder, it is used to pull the steel wire out of tireÂ
Model No.
TD-1200
Feed size of tire(mm)
≤φ1200
Capacity(tires/h)
80-100
Power(KW)
7.5
Overall dimensions(m)
4.7*0.9*1.7
Equipment weight (T)
1.55
Second step (Â optional): it is used when tire size is larger than 850mmÂ
Model No.
TC-1200
Feed size of tire(mm)
≤φ1200
Capacity(tires/h)
30-40
Power(KW)
7.5kw
Overall dimensions(m)
1.85*0.7*1.76m
Equipment weight (T)
2.5T
Third step: tire shredderÂ
1. This whole tire shredder can cut whole tire into 50X50mm and 60X60mm rubber block as you need.Â
2. The oversize types can be cut to small pieces by whole tire cutter.Â
Model
TS-900
TS-1000
TS-1200
Capacity
1-2ton/h
3-4ton/h
4-6 tons/h
Feed sizes of tire
≤900mmÂ
≤1000mm
≤1200mmÂ
Output sizes
≤50*50mm
≤50*50mm
≤50*50mm
Motor power (KW)
22*2+4+1.5
45*2+4+1.5
55/75*2+5.5+1.5
Weight
9T
12T
15.6T
Fourth step: Rubber crusheris used to grind the chunks into smaller mesh powder through the vibrating screen as you need.Â
Model
Drum diameter
Drum length
Front roll linear
Roll speed ratio
Max roller spacing
Motor power
XKP-350
300mm
500mm
17.6m/min
1: 2.5
8mm
37kw
XKP-400
400mm
600mm
21.6m/min
1: 2.5
8mm
45kw
XKP-450
450mm
760mm
25.3m/min
1: 2.5
8mm
55kw/75kw
XKP-560
560mm
800mm
28.6m/min
1: 2.5
8mm
75kw/90kw
 XKP560D
 560mm
 1000mm
 42.5m/min
 1: 2.5
 8mm
 132kw160kwÂ
Advantages of tire recycling machine:Â Â
1. Crusher roller speed ratio: Ours is 1: 2.5, while the old type roller speed ratio is 1: 1.38.Â
2. Roller structure: Our two rollers are both grooved, which increase the friction and then improve the output, while the old type is one with groove, and the other is smooth.Â
3. Roller material: The roller is made by Welding wear resistant alloy materials, 5Cr6MnMo. We can offer you 3 years warranty of the roller. While the old types machine use cast iron to make the rollers, very easy to break or crack in two.Â
4. Machine feature: Our machine is energy saving 1/3. For example, producing 1T powder, our machine electricity consumption is only 150°, while their electricity consumption is about 250- 280° in making 1T powder.Â
5. Bearing: Our machine use rolling bearing, there are 8 pieces bearing inside, while the old machine use the slide bearings ( bush), which is not as good as ours. Â
Auxiliary equipment:
Magnetic separator: to separate the scrap steel from rubber powder;
Main feeder: to convey the big sizes rubber granules into rubber crusher;
Vibrating screens: to separate the fine rubber powder from bigger sizes;
FAQ:
Q1,Are you a factory or a trading company?
A. We are a manufacturer with 30 years production experience in tire recycling plant and nail making machines. We have export license, we can offer you the factory prices.
Q2. Can you guarantee the capacity as you mentioned ?
 A. Definitely yes, the grooved two rollers are specially designed to increase the output and ensure the working efficient.
Â
Q3, are you sure the final rubber powder can be completely clean out of wire steel or nylon ?
A. The final powder purity can reach 99.9%. we have magnetic separator which can separate the wire steel from the rubber powder.
Waste tire recycling rubber cutter machine/used tire cutting machine is to crush waste tires into rubber powder in different sizes. The final rubber powder is with purity of 99.99%, can be used to make rubber tiles, rubber mat, asphalt, waterproof material, filler of artificial grass.
The working process of waste tire recycling machine:
Waste tire - Tire de beader- whole tire cutting - tire shredder - Rubber crushing - magnetic separator - fiber separator - Rubber powder  Â
Specification of used tire cutting machine: Â
First step: Tire de bearder, it is used to pull the steel wire out of tireÂ
Model No.
TD-1200
Feed size of tire(mm)
≤φ1200
Capacity(tires/h)
80-100
Power(KW)
7.5
Overall dimensions(m)
4.7*0.9*1.7
Equipment weight (T)
1.55
Second step (Â optional): it is used when tire size is larger than 850mmÂ
Model No.
TC-1200
Feed size of tire(mm)
≤φ1200
Capacity(tires/h)
30-40
Power(KW)
7.5kw
Overall dimensions(m)
1.85*0.7*1.76m
Equipment weight (T)
2.5T
Third step: tire shredderÂ
1. This whole tire shredder can cut whole tire into 50X50mm and 60X60mm rubber block as you need.Â
2. The oversize types can be cut to small pieces by whole tire cutter.Â
Model
TS-900
TS-1000
TS-1200
Capacity
1-2ton/h
3-4ton/h
4-6 tons/h
Feed sizes of tire
≤900mmÂ
≤1000mm
≤1200mmÂ
Output sizes
≤50*50mm
≤50*50mm
≤50*50mm
Motor power (KW)
22*2+4+1.5
45*2+4+1.5
55/75*2+5.5+1.5
Weight
9T
12T
15.6T
Fourth step: Rubber crusheris used to grind the chunks into smaller mesh powder through the vibrating screen as you need.Â
Model
Drum diameter
Drum length
Front roll linear
Roll speed ratio
Max roller spacing
Motor power
XKP-350
300mm
500mm
17.6m/min
1: 2.5
8mm
37kw
XKP-400
400mm
600mm
21.6m/min
1: 2.5
8mm
45kw
XKP-450
450mm
760mm
25.3m/min
1: 2.5
8mm
55kw/75kw
XKP-560
560mm
800mm
28.6m/min
1: 2.5
8mm
75kw/90kw
 XKP560D
 560mm
 1000mm
 42.5m/min
 1: 2.5
 8mm
 132kw160kwÂ
Advantages of tire recycling machine:Â Â
1. Crusher roller speed ratio: Ours is 1: 2.5, while the old type roller speed ratio is 1: 1.38.Â
2. Roller structure: Our two rollers are both grooved, which increase the friction and then improve the output, while the old type is one with groove, and the other is smooth.Â
3. Roller material: The roller is made by Welding wear resistant alloy materials, 5Cr6MnMo. We can offer you 3 years warranty of the roller. While the old types machine use cast iron to make the rollers, very easy to break or crack in two.Â
4. Machine feature: Our machine is energy saving 1/3. For example, producing 1T powder, our machine electricity consumption is only 150°, while their electricity consumption is about 250- 280° in making 1T powder.Â
5. Bearing: Our machine use rolling bearing, there are 8 pieces bearing inside, while the old machine use the slide bearings ( bush), which is not as good as ours. Â
Auxiliary equipment:
Magnetic separator: to separate the scrap steel from rubber powder;
Main feeder: to convey the big sizes rubber granules into rubber crusher;
Vibrating screens: to separate the fine rubber powder from bigger sizes;
FAQ:
Q1,Are you a factory or a trading company?
A. We are a manufacturer with 30 years production experience in tire recycling plant and nail making machines. We have export license, we can offer you the factory prices.
Q2. Can you guarantee the capacity as you mentioned ?
 A. Definitely yes, the grooved two rollers are specially designed to increase the output and ensure the working efficient.
Â
Q3, are you sure the final rubber powder can be completely clean out of wire steel or nylon ?
A. The final powder purity can reach 99.9%. we have magnetic separator which can separate the wire steel from the rubber powder.
Automatic Tire Shredder Machine for Rubber Blocks/Tire Recycling Line
Model NO.: TS-900/1000/1200
Final Powder Size: 5-40mesh
Trademark: HVST
Transport Package: 40gp Container
Specification: 1-2tons/h capacity
Origin: Henan, China
HS Code: 8477800000
Model NO.: TS-900/1000/1200
Final Powder Size: 5-40mesh
Trademark: HVST
Transport Package: 40gp Container
Specification: 1-2tons/h capacity
Origin: Henan, China
HS Code: 8477800000
Automatic tire shredder machine for rubber blocks/tire recycling lineÂ
Automatic tire shredder machine for rubber blocks/tire recycling lineÂ