Galvanization is the leading method to protect metals from environmental elements that cause corrosion, rust, and the eventual weakening of the steel. Hot-dip galvanizing deposits a thick, robust layer of zinc iron alloys on the surface of a steel item. When exposed to the atmosphere, pure zinc reacts with oxygen to form zinc oxide which further reacts with carbon dioxide to form zinc carbonate. A dull, grey, fairly strong material that stops further corrosion in most circumstances, protecting the steel from the elements. Galvanized steel is widely used in applications where rust resistance is needed. Galvanized steel can be welded however, you should exercise caution around the resulting fumes. Galvanized steel is commonly used in the automotive industry to enhance the corrosion performance of exterior body parts. Galvanized Steel is magnetic.
Galvanized Plate,Hot Dipped Galvanized Steel Plate,Gi Plate,Galvanized Steel Sheet,Zinc Coated Steel Plate Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.cnshansteel.com
China's LED white light indoor positioning is the first to commercialize
The rapid popularization of LED lights has made visible light communication technology (LED white light communication technology) the latest and most anticipated indoor positioning technology, solving the problem that has once plagued all indoor positioning technologies with a positioning accuracy of more than 5 meters. For the first time, the positioning accuracy is limited to 1 meter. ! Both foreign and domestic technology pioneers focus on LED white indoor positioning technology, but only China has taken the lead in completing the process from technology to commercialization. The accuracy of indoor positioning technology was as early as 2011. When Google Mobile Map 6.0 was released, it has already added indoor navigation functions in some areas. This solution mainly relies on GPS (the indoor can also search for 2 to 3 satellites) and wifi signals. The mobile phone base station and the positioning of the indoor location according to the specific location of some blind spots (where there is no GPS, wifi or base station signal in the room). Although this solution was not perfect at the time, there were obvious defects in both positioning accuracy and signal stability. Therefore, Google’s mobile phone map is more conceptual innovation, and it does not have technical operability. universality. However, it still caused a sensation at that time, and people felt the breakthrough progress of indoor positioning technology. In September 2013, Apple added a technology feature called iBeacon on the newly released mobile device, which caused the crazy pursuit of fruit powder. Although fruit powders are bought, the technology mainly uses Bluetooth technology to achieve indoor positioning. In the eyes of researchers, this is not the most accurate, nor is it the most stable indoor positioning technology. Because whether it is GPS or WIFI, or Bluetooth, the technical flaws are especially obvious in terms of accuracy. The positioning accuracy of GPS is 10 to 100 meters, and it has to be affected by the environment. It needs multi-point positioning and data matching to complete, and the reaction speed is relatively slow. Although the technology of WIFI and Bluetooth is relatively mature at present, by relying on the principle that the wireless signal of the mobile phone and the WiFi wireless network is attenuated in the air, the indoor position is determined by measuring the intensity of the wireless signal and calculating the attenuation distance. However, since the attenuation of wireless signals in the air is greatly affected by the environment inside the building, the positioning is very inaccurate. However, there is still no way to locate the accuracy less than 5 meters, and the floor recognition of the indoor space is not high, and the signal stability and confidentiality of information transmission are difficult to guarantee. Although many international universities, research institutes, and business circles such as Google, Nokia, Motorola, and Microsoft have conducted a lot of research, they have not been able to surpass theoretical obstacles. In the outdoor omnipotent traditional navigation, the indoor positioning of the last mile navigation has an insurmountable scale and precision. LED indoor positioning technology, however, as early as the early 21st century, technical experts in many countries saw another possibility, an environmentally friendly, energy-saving lighting new material LED, technical experts in fluorescent lights or LEDs The high-speed light and dark flickering signals that are invisible to the naked eye can not only be used to transmit information, but if positioned, the positioning accuracy can reach 1 meter! This completely overturns people's understanding of general lighting, so experts around the world are studying how to use the white light in the LED to transfer from information to information reception. In the end, people discovered the mystery from the smartphone. The camera of the smartphone can be used as a terminal to receive information. Tang Haijun, the deputy director of the operation of Huashiguang Communication Technology Co., Ltd., the first company in China that owns the independent property rights of LED white light indoor positioning technology and realizes commercial operation, said that this technology is not only a revolution of intelligent lighting, but also solved indoors. Positioning the precise problems in history. The principle of the technology is to compile the information to be transmitted into a modulated signal, and attach it to the driving current of the LED lamp by pulse width modulation, so that the ubiquitous light source in the user acts as a launching carrier, and when the user enters the lighting area of ​​the lamp, The smart signal received without any hardware receives and recognizes the optical signal, and resolves the unique identification information sent by the luminaire. The corresponding location information is determined in the map database by using the acquired identification information, and the positioning is completed. In the opinion of technical experts, this technology almost solves the shortcomings of all previous indoor positioning technologies: positioning accuracy reaches 1 meter, signal stability, high information confidentiality, and no environmental impact. Global technology research and development experts are looking at it. Aiming at visible light communication technology. Whether it is Japan, South Korea, the United States or China, it is committed to the practical use of the technology. Bytelight, a company established in the United States in 2011, is the most concerned company in the field. From the initial development stage to the completion of financing, the company will soon cooperate with lighting manufacturers to enter the actual production stage. In contrast, China's pace is moving faster. Huace Optical Communication Technology Co., Ltd., as a project in cooperation with the National Semiconductor Lighting Innovation Lab, independently developed a U-beacon indoor positioning system based on LED white light positioning technology, using a CMOS camera for visible light signal reception, unlike using a photodiode to receive Visible light compensates for the lack of interference from other surrounding light sources in other countries in terms of visible light signal reception. In the middle of this year, it realized commercial operation and launched the world's first application APP with 3D360 real-life maps. It has already started trial operation in Changzhou, Jiangsu. Of course, there are other possibilities for technicians to see from the Internet. Fudan University developed the Internet access technology under the optical positioning system based on this technology, but this is only a conceptual technology. Due to the influence of hardware and environment, it can only be realized in a small scope. The multi-dimensional application prospect of visible light communication is only the initial stage. For WIFI and Bluetooth positioning, using visible light for positioning, not only the initial installation cost is low, but also does not need to re-scan signal strength like WIFI and Bluetooth, and the maintenance cost is low, plus the advantage of positioning accuracy, people's future for visible light communication More optimistic. Not only technical improvement, but more multi-dimensional presentation at the application level. According to the report, as of January 2014, the total number of mobile Internet users in China reached 838 million, and the penetration rate among mobile phone users reached 67.8; the number of mobile Internet users reached 500 million, accounting for more than 80% of the total number of Internet users. Internet terminal status. The development of China's mobile Internet has entered the era of the whole people. At the same time, in China, LED has become the development trend of future lighting. According to research statistics, many company executives and industry experts believe that 2013-2015 will be a period of rapid growth in LED lighting penetration. In 2015, domestic LED penetration rate will be Up to 50. At present, the majority of commercial sites are replacing LED light sources. Ubeacon technology aims to add a low-cost original to the existing light source, which can be promoted along with the LED replacement wave. Tang Haijun, deputy general manager of Huace Optical Communication Technology Co., Ltd., believes that in the commercial operation, the role of visible light communication technology is more obvious, and the technology is combined with smart phones and networks, and through the panoramic display of indoor 3D360 real-life maps, It will provide significant support for the construction of the O2O platform for future physical businesses. Therefore, they are seeking cooperation in commercial projects in first- and second-tier cities across the country. LED lamps and smart phones, which are the two major hardware for realizing visible light communication, the large-scale popularization of hardware has given more possibilities to the intelligent development of LED indoor positioning technology to a certain extent. In the eyes of professional technicians and operational experts, the application of this technology is not only in the commercial field, but also in many industries, and its future development has a prospect that cannot be ignored. At present, the prototypes have been found in the underground positioning system and in the special industry. Both systems can confirm the relevant position information in real time through the accuracy, stability and convenience of optical positioning, and perform safety control and disaster warning. At the same time, one-to-one confidentiality of optical positioning transmission can be used. Information transmission in special industries. Of course, the bolder imagination is that, perhaps one day, the use of this optical positioning technology is not limited to indoor space, but it can even be used in certain outdoor environments in the case of extremely high LED penetration. Perhaps, not only the WIFI that is deeply dependent on today, but even the various outdoor LED displays can realize its intelligent application.