1.Machine Introduction:                                       
This machine has a three-in-one function of water storage, cleaning, and recycling.
It Can clean carpets(applicable to pure cotton, pure wool, nylon, acrylic and other carpets), sofas, curtains, mattresses.
Oil stains, tea stains, wine stains, blood stains, lime stains, mildew stains, etc. are easily washed.


2.Technical Parameters:

Model No.	HT-T20D
Voltage	220V 50hz
Water absorption motor power	1kw
Equipment suction	18Kpa
Water tank capacity	10l
Sewage tank capacity	10l
Water discharge motor power	40w
Roller width	280mm
Hose length	2.5m
Wire length	10m
Weight	22kg
Size	535*400*640mm

3.Machine Pictures:





4.Packing & Delivery:


5.Company Certificates:


6.Our Customers:


7.Contact us:

If you need further information, please contact us freely, we will do our best to cooperate with you.
 

1.Machine Introduction:                                       
This machine has a three-in-one function of water storage, cleaning, and recycling.
It Can clean carpets(applicable to pure cotton, pure wool, nylon, acrylic and other carpets), sofas, curtains, mattresses.
Oil stains, tea stains, wine stains, blood stains, lime stains, mildew stains, etc. are easily washed.


2.Technical Parameters:

Model No.	HT-T20D
Voltage	220V 50hz
Water absorption motor power	1kw
Equipment suction	18Kpa
Water tank capacity	10l
Sewage tank capacity	10l
Water discharge motor power	40w
Roller width	280mm
Hose length	2.5m
Wire length	10m
Weight	22kg
Size	535*400*640mm

3.Machine Pictures:





4.Packing & Delivery:


5.Company Certificates:


6.Our Customers:


7.Contact us:

If you need further information, please contact us freely, we will do our best to cooperate with you.
 

Gas Stove Parts is used in Gas Stove. The main components of the embedded stove are:
Structural parts: panel, bottom shell, this is a good understanding of the main structure.

Combustion system: fire cover, burner: the burner is usually cast iron or aluminum alloy. The primary air from the gas and the ejector enters from the burner and is initially mixed. Then it is mixed again through the fire cover and continuously sprayed from the fire hole of the fire cover. Out, forming a continuous combustion.
Ignition system: pulser, ignition porcelain needle: The pulse generator generates a high-voltage discharge device. The ignition ceramic needle (with wire) guides the high voltage generated by the pulser to the discharge position of the designated fire cover to ignite the gas.
Pneumatic control: valve body, air pipe: The valve body is to adjust the size of the flame, by adjusting the flow rate. The trachea is the passage of gas.
Other plastic parts: knobs, battery boxes, etc.
Partial seals: sealing strips, etc.

Gas Stove Parts

Burner Gas Stove,Stove Gas Burner,Gas Stove Parts,Gas Stove Burner Parts

CHANGXING BENNENG GAS APPLIANCE CO.,LTD , https://www.benngas.com