MBS promoter is commonly known as MBS resin. As one of the most major impact modifier for PVC, toughening of MBS resin can be either in at the same time, the maximum keep the transparency of PVC, compared with other impact modifier for at the same time, in the case, for the amount of the same can also be more greatly enhance toughness of products, and therefore is widely used in PVC with processing of engineering plastics such as PBT/PC application process. PVC Impact Modifier MBS,MBS in Form Powder,Impact Modifier MBS Powder,MBS White Powder Hengshui Yimei New Material Technology Co.,Ltd , https://www.oxidizedpewax.com
Yan Shirong, executive vice president of the Shenzhen LED Industry Association, said that from last year to now, capital has been eagerly attracted to the LED industry, and only the enterprises in the Shenzhen LED industry have experienced intensive listings in the first half of the year. With the application of the scale market, the price of lighting market has dropped sharply. The price of LED lighting will continue to drop during the year, and it is expected to drop 30. It is expected to be equal to the price of energy-saving lamps next year.
Wu Yulin, president of the Foshan Lighting Association, said that in addition to the occasional recycling activities, the recycling of waste energy-saving lamps is almost zero. The problem in rural areas is more serious than in urban areas. The state promotes energy-saving lamps in a subsidized manner, mainly in rural areas where purchasing power is relatively weak. The packaging of energy-saving lamps did not tell rural residents how to discard them. If you discard it into a river or field, it is a disaster for the environment.
Wang Jianping, general manager and director of lighting design of Shanghai Aite Lighting Design Co., Ltd. pointed out that in Europe and the United States, the government is very cautious about the use of LED functional road lighting, especially the main road lighting, and will consider providing good drivers. Drive the environment and let it see the road. In addition, the government will transform the LED street light LED lighting vs. energy-saving lamps who will dominate the market?
"Incandescent delisting LED lighting vs energy saving lamps who fight for the wind"
Although LED lighting comprehensively surpasses CFL energy-saving lamps in various data, it is still far superior to LED lighting in terms of production process maturity, early investment, lighting effect and price, from domestic and international market demand and energy saving and emission reduction requirements. In view of the above, energy-saving lamps are still the best choice for replacing high-energy lighting products such as incandescent lamps and halogen lamps. From the perspective of long-term development, the advantages of LED lighting are self-evident. In order to achieve greater success in the future lighting market, the key is to lay down the basic technology and fundamentally solve the problem of LED lighting in current applications. The problem is to show people a green, efficient, energy-saving, economical and practical product image.
"The popularity of the incandescent delisting LED lighting market is not at hand."
In order to realize the real civilianization of LED, it is necessary to reduce the cost to the range accepted by ordinary civilians. This requires LED companies to focus on developing the market while doing their homework in product technology, and more needs government support. The frenzy of development has exposed industry defects, and the LED industry is facing bottlenecks such as core technology constraints, lack of standards, and capital shortages. The idea of ​​simply replacing incandescent lamps will also change. In order to realize the complete delisting of incandescent lamps and the successful promotion of energy-saving lamps, this process can be realized overnight, and LEDs have a long way to go.
"There is the LED behind the replacement of energy-saving lamps: the analysis of the gap in the recycling mechanism"
Edison may not have expected that bringing bright lights to humans will one day cause environmental pollution. The source of pollution is not the incandescent lamp invented by Edison, but the energy-saving lamp that is being promoted nowadays. The news that an energy-saving lamp contains an average of 0.5 milligrams of mercury, which will pollute the environment, has recently received widespread attention. However, while the country strongly advocates energy-saving lamps to go to the countryside, the corresponding waste energy-saving lamp recycling mechanism is a blank.
"Which multinational incandescent light delisting energy-saving lamps, LEDs will dominate the lighting market?"
The incandescent lamp delisted, and the most popular in the lighting market is the two main characters of energy-saving lamps and LEDs. Although LED lighting completely surpasses energy-saving lamps in various data, due to the lack of core technologies of domestic LED products at this stage, the price of products is high and the cost performance is poor. At the same time, the domestic LED market is mixed, the overall quality of the products is worrying, and each process of producing LEDs is related to the quality and durability of the entire product.
Xiaobian comment:
In summary, energy-saving lamps and LEDs have their own advantages and disadvantages in the current lighting market. From the perspective of energy saving and environmental protection, LED energy saving effect is outstanding, and there is no danger that ordinary energy saving lamps pollute the environment and human health. However, from the perspective of consumers, the current quality of LED lighting products is uneven, and the industry needs to be regulated. At the same time, LED products need to further strengthen the core technology research and development, reduce costs, thereby reducing the market price of products, and producing cost-effective lighting products that more consumers can accept.
There is still a long way to go to achieve full replacement of incandescent and energy-saving lamps, which requires enterprise efforts, government support, and changes in the concept of mass consumption. From the perspective of market acceptance, energy-saving lamps will still dominate the lighting market for a long time. Of course, it is also necessary to improve the recycling mechanism of waste energy-saving lamps and avoid unnecessary environmental pollution caused by energy-saving lamps.
Energy-saving lamps and LEDs who will dominate the future lighting market?