On the night of November 4, 2015, due to the combined effect of cold and warm air, a large range of rain and snow will occur in the central and eastern regions of China. Into winter, China's many highways to disable the "watering device" has entered the severe investigation stage, otherwise it will face 500 yuan fine. Just a few days ago, the high-speed traffic police in Shanxi carried out a centralized special rectification of large trucks that had illegally installed showers. In the course of nearly a week of operations, 23 people were investigated and educated. In order to solve the problem of overheating of the vehicle brakes and maintain the braking characteristics of the brakes, many trucks have installed a “watering device†without permission. After the vehicle that used the sprinkler passes through, it will leave behind water on the road surface. At about 11pm on November 8, 2014, when a heavy-duty coal semi-trailer with the license plate No. HE8132 was driving to a length of 830km+600m in the area, the semi-trailer rolled over due to dark ice on the road surface, resulting in driving. Zhang was injured and the goods shipped were scattered. Although dozens of people in traffic police, highway administration, conservation, etc., have been cleared at the scene, due to a full truckload of coal paved with roads, the cleaning work is very difficult and the traffic control process lasts for 10 hours. According to the provisions of Article 16 of the "Road Traffic Safety Law", no unit or individual may assemble a motorized vehicle or change the structure, structure or characteristics of a registered motor vehicle without authorization. The unauthorized installation of a shower device is an illegal reconstruction of the original structure of the vehicle. According to the provisions of Article 16 of the "Road Traffic Safety Law" and Article 57 of the "Registration Regulations of the Motor Vehicle," the unauthorized alteration of the vehicle's appearance and registration has been made. The relevant technical data was ordered by the traffic administrative department of the public security organ to be reinstated and a fine of 500 yuan was imposed. The traffic police department recommends: Freight vehicles can be braked in other ways. The first is to raise the awareness of active safety. In the face of long-term downhill slopes, avoid using the brakes too often and use low gears to maintain the vehicle's speed. In the event of an emergency, it is necessary to grab a low gear, make full use of the safeway on the side of the road, or rely on roadside slope protection and guardrails to slow down. In addition, an auxiliary brake device such as an engine brake and a retarder may be installed on the vehicle, which not only has a good braking effect but also greatly reduces the driving intensity of the driver. Fast retarder is tailored for the heavy truck whole new generation of automotive brake products with independent intellectual property rights, to fill the gaps in the market, the key core technology has reached the international advanced level. Its unit braking torque and braking power are large, the braking force is not degraded, the braking is soft, there is no impact, and it can work for a long time without thermal decay, and the structure is compact and light. The vehicle has good comfort, short axial dimension, easy installation and maintenance, and has the advantages of prolonging the service life of the brakes and operating economy. With the maturation of Fast Retarder's products and rising market share, major host manufacturers’ enthusiasm for this product has been rising. Since it was put on the market, it has been well received by the majority of drivers. In cloud, Guizhou, Sichuan and other places, with long downhill and multi-bending conditions, it has exhibited excellent adaptability, and has fully met the development needs of heavy-duty gear, large-tonnage, high-horsepower, high-speed and different users. Personalized requirements provide reliable security protection and efficient deceleration braking for medium and heavy trucks. Silica Matting Agent For Wood Coatings
Description
1, Silica
Matting Agent generally used for PU/NC wood coating, unsaturated polyester wood coatings. It is synthetic amorphous
micronized precipitated silica appearing as white powder and for both
solvent-based and water-based system. Advanced matting efficiency is achieved
by using silica with high pore volume and by fine control of the particle size
and particle size distribution. It provides a superior matting and flatting,
excellent coating appearance and transparency, cost efficient, effective
anti-settling agent and easy dispersion, smooth, abrasion resistant ï¬lms
of high surface quality. Silica Matting Agent reduce the gloss of a
variety of products including coatings, paints, inks, lacquers, varnishes,
while providing lower viscosity and better flow capability.
2, Silica
Matting Agent reduce the gloss of a variety of products including coatings,
paints, inks, lacquers, varnishes, while providing lower viscosity and better flow
capability. A broad array of non-treated and wax-treated products,
covering high-purity silica content, high pore volume and by fine control of
the particle size and particle size distribution. Careful design and control of
silica physical properties ensure dispersion stability, hand-feel,
anti-setting behavior and scratch resistance in solvent-borne and water-borne
system.
Characters
1, Highest matting
efficiency: High pore volume reach to
1.8-2.0 ml/g, and fine control of the particle size and particle size
distribution.
2, Outstanding
anti-settling properties: The products which with wax surface treatment help
prevent settling and improve re-dispersion.
3, Surface
smoothness and improvement in scratch resistance: These silicas have minimal
effect on the physical properties, allowing development of smooth films with
excellent hand-feel, scratch resistance and stain resistance.
4, Excellent
transparency: High purity of silica product ensures that refractive index can
inosculate with resin index.
Applications
1, Clear and
pigmented woodcare applications, such as NC wood coatings, PU wood coatings,
unsaturated polyester wood coatings.
2, Plastic Coating
used as self-phone, laptop, car, Motor-bike, toy and the can.
3, Printing Inks, Gravure Printing Ink, Offset Printing
Ink, Screen Printing Ink, Printing Packing Material.
4, Industrial
Coating, Metal baking Coating, Decorative Coating
5, Plastic
Coating, 3C Coating.
Advantage
1, We will continue to invest in research and
development, application technology and production capacities in emerging
markets. We had set up a research and development center to study new silica
products to use special application.
2, We located in a modern city, as a research,
development and production for chemical raw materials, as well as one of the
largest production bases of silica in China.
3,We are the
leading raw material and technical solution provider to the Paint/Coating/Ink
chemical Industry. We focus on Paint/Coating Market about 25 Years, with
advanced technology and good experience to develop different kinds of silica
matting agent used for different application, such as Wood and
furniture Coating, Industrial Coating, Coil Coating, automotive coatings and
plastic coatings as well as printing inks, leather coating, textile coating
and decorative coatings.
Silica Matting Agent For Wood Coatings ,Paint Silica Matting Agent,Precipitated Silica Matt Powder,Aerogel Matting Agent Guangzhou Quanxu Technology Co Ltd , https://www.inkjetcoating.com
Rain and snow will increase after winter
Fast Retarder
Fast Relief offers Winter Rainer Alternative