Features of the perform mold:
♦ Reasonable-designed cold water channels increase cooling effect and shorten the cycle time.
Preform Mold, PET Preform Mold, Injection Preform Mold, Preform Mold for Injection Machine; TAIZHOU WATON MACHINERY CO LTD , https://www.watonblowings.com
On June 30, 2011, 1060 pure electric environmental sanitation vehicles were put into operation in Futian. Beijing has the largest fleet of electric sanitation vehicles in the country. This has become the largest demonstration project for new energy vehicles in Beijing and even in China. Since then, Beijing's environmental sanitation vehicle update will use electric vehicles as much as possible.
The first batch of sanitation electric vehicles were put into operation. The ceremony was held on the east side of the Central TV Tower. No matter whether it is a small garbage sorter or a large road sweeper, there are no exhaust ports, and there is no difference between the other parts and ordinary cars. After that, Beijing citizens will see fewer and fewer opportunities for sanitation and sanitation. 
According to reports, a total of 1,060 electric-powered environmental sanitation vehicles have been put into operation, covering two types of chassis of 2 tons, 8 tons, and 16 tons, including eight models of garbage sorters, road sweepers, and sprinkler-dusting vehicles, which have zero emissions. , low noise, low heat radiation and other good environmental performance. These vehicles have high technological content. After they are put into operation, they will greatly improve the level of sanitation equipment and operational efficiency. After that, they will be busy in sanitation operations in 14 districts and counties in Beijing, such as Haidian and Chaoyang.
It is understood that in September 2009, Beijing Sanitation Electric Vehicle Demonstration and Application started. The first batch of 30 sanitation electric vehicles took the lead in the Xicheng District. After achieving good operating results, sanitation electric vehicles were added to more than a thousand. Vehicle.
♦ No cutting of valve gate is employed to reduce the labor cost.
♦ Advanced hot runner system assures lower level of AA value.
The 1-16 cavity, the 24 cavity, the 32 cavity, the 48 cavity, the 72 cavity, the 96 cavity, and the 144 cavity bottle billet mold.
ROPP ALASKA, PCO1810, PCO1881, BPF
30/25, 29/2526/22,38mm, 48mm, 50-150mm
Equal specifications
Use machine
DEMARK, HUSKY, NETSTAL, KATA, etc.
Equipment.
Fukuda 1060 electric sanitation vehicles put into operation in Beijing to build the largest new energy fleet
Bottle mouth