Grain packaging machine installation precautions

The particle packaging machine is widely used in the packaging industry. It is loved by friends of all users. Everyone may have a certain understanding of it. However, everyone knows about the installation and use of the particle packaging machine. Here's a summary of the particles. Detailed information on the installation and use of the packaging machine.
1. When more than one particle packaging machine is installed in one place, two adjacent stations should not be installed on the same steel platform, and the middle should be separated. There must be enough space around for operation and maintenance. The installation must ensure that the scale body is free from shaking or obvious vibration during operation to ensure the accuracy of measurement. Ensure that the scale body is installed horizontally and has sufficient strength and has a good protective grounding.
2. Sewn-column columns and product conveyors should be installed horizontally. They can be fastened with embedded anchor bolts or expansion bolts. The center of the bag must coincide with the longitudinal centerline of the conveyor. The packaging machine of the pellet packaging machine clamps the packaging bag. The gap between the lower end of the packaging bag and the conveyor belt should not be too large, generally 5 to 10 cm is suitable.
3. In addition to connecting between the hopper and the scale rack through the sensor, there must not be any other force transmission channels, and the scale bucket and the scale rack must not be in contact.
4. In order to ensure the accuracy of weighing and require a certain storage capacity of the silo, a secondary buffer bucket is required between the feed port and the silo, and the weight of the weighing material is about 5-8 packs. Silo and secondary buffer hoppers, buffer hoppers and granule packaging machines use manual sluice gates to adjust the flow rate, and also facilitate the closing of sluice gates when the granule packaging machine is inspected. The material flow in the silo or buffer hopper does not come down. It is recommended that the user set the bypass pipe for feeding in order to service the equipment. The flange joints should be sealed with rubber strips.

Aluminum Casting Parts

Aluminum Casting Parts ,Aluminium Die Casting Parts,Aluminum Die Casting Parts,Aluminum Casting Diy

Ningbo CCMS Industrial Co. Ltd , https://www.cncoemmachiningparts.com