Scrap crusher core construction: The main working part is a rotor with a hammer (also called a hammerhead).

The rotor of the scrap crusher consists of a spindle, a disc, a pin and a hammer. The motor drives the rotor to rotate at a high speed in the crushing chamber of the scrap crusher.

The material is fed into the scrap crusher from the upper feed port and is crushed by the impact, impact, shearing, and grinding action of the high-speed moving hammer.

In the lower part of the rotor, after being crushed in the same way as the upper part, the scrap crusher does not require the bottom of the sieve, so that the material can be crushed to a suitable standard and discharged directly from the outlet.

The working principle of scrap crusher: the combination of fixed knife and movable knife, the fixed knife is fixed at the top of the cutter head. When the material enters the shell, it plays the role of forced feeding and forced crushing.

The moving knife is the vertical head. When the material is severely torn by the fixed knife, the particles smaller than the screen mesh are formed in the hammering process after the rotation of the rotating disk, and are filtered into the discharge port through the screen mesh.

At the same time as the material is discharged through the dust collector, the paint and impurities are sucked away. The broken metal particles are clean, bright and reduce pollution. The screen can be custom designed according to the material and user requirements.