Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck
Posted on

Model NO.: CLW38046HAWT
Transmission Type: Manual
Drive Wheel: 4x2
Condition: New
Trademark: CLW
Transport Package: Waxing
Specification: 3-5t
Origin: Suizhou China
HS Code: 8705909090
Model NO.: CLW38046HAWT
Transmission Type: Manual
Drive Wheel: 4x2
Condition: New
Trademark: CLW
Transport Package: Waxing
Specification: 3-5t
Origin: Suizhou China
HS Code: 8705909090
Aerial work vehicle refers to a vehicle that is capable of lifting up and down the operation of a hydraulic cylinder which is controlled by hydraulic or electric system for more than 3 meters.
Aerial work vehicles generally have folding arm, telescopic arm, mixed arm, self-type, scissors  five series.
The structure and working principle of the aerial work vehicle are as follows:
1, the high-altitude work vehicles take force device.
Take the power device from the pump, take the device, the soft axis of the cable composition.  
2, the high-altitude operation of the car rotation agencies
Rotary mechanism made of the hydraulic motor, planetary gear reducer, slewing ring and other components. Its working principle is: hydraulic motor drive reducer, reducer output shaft on the pinion rotation to promote the rotation support, so that turntable rotation.
3, the high-altitude operation of the central rotary joint
Central rotary joint, installed in the turntable rotation center, to solve the work of the sub-frame relative to the ground static, the upper rotation.
4, the high-altitude operating vehicle hydraulic system
The hydraulic system is supplied by a main pump. The working pressure is 14Mpa and the flow rate is 25L / min. The working pressure is set by the relief valve. Working principle: When the force gear gear, the main pump running, fuel tank through the oil pump output, reach the leg operation valve. After the operation of the legs, the allocation of the handle to the car, then hydraulic oil from the legs to switch to the car on the bus, part of the car can work.

 
Specification
  ISUZU 12m high altitude operation Truck
  Right /Left hand drive with air condition
  Chassis Model S215060JGK16
  Gross weight kg 6850
  Curb Weight kg 5400
  Overall Dimension mm 7500×1995×3220
  Wheelbase mm 3360
  Axle load kg 1935/3880
  Approach/ Departure angle (°) 18/12
  Wheel Track Front mm 1610
  Rear mm 1550
  Minimum Ground Clearance mm 400
  Engine CE20F, Turbo , In line, Diesel
  Power kW 76
  Engine manufacturer Chaochai Engine Power Co., Ltd
  Fuel Consumption L/100Km 11-14
  Fuel Tank Capacity L 100
  Fuel type Diesel
  Tires 7.00R16
  Maximum Speed km/h 90
  Maximum Grade ability % 22
  Minimum Turning Circle m 16
  Max. Brake Distance(Fully laden,30km/h) m 9
Configurations of upper load 1.     2-foldable arm
2.     4 units of H type hydraulic legs
3.     Working platform: 1000*500*900 mm ; rotate 360 degrees ; load capacity 200kg.
4.     Hook: 1 tons load capacity.


High Lift Platform Truck Show

Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck
Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck
Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck

Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck


Q&A
1.Q: Are you a manufacturer or trading company?
A: We are manufacturer. You are welcomed to visit our factory.
Factory Address: Chengli Automobile Industrial Park, South Suburb, Suizhou, Hubei, China 
2.Q: What kind of payment do you accept?
A: We accept T/T and L/C usually. 
If you want to use others payment, contact us for confirmation.
3.Q: Can you customize trucks according to customers' need?
A: Yes, product customization service is our speciality.
4.Q:What's your after-sale service?
A: We provide technical support for our products.
 Besides, we also provide  spare parts as long as customers need.
5.Q: What's your delivery time?
A: It depends on the quantity, usually takes 10-15 working days.

Chengli automobile co.,Ltd covers an area of about 67 hectares, more than 8000 employees, production and sales of various special vehicles more than 300 kinds.
Our company is keeping growing during 15 years. Our sales revenue reached 400 million dollars and exports reached 20 million dollars in 2016.  
Our leading varieties include refuel tank truck, LPG tanker,sprinkler, tank truck, garbage truck, suction truck, sewage suction truck, dump truck, van, trailer, wrecker, truck cranes, aerial vehicles, coach cars, bulk cement truck, chemical trucks, fire truck, cement mixer, tractor and other eight series of more than 300 varieties of models. Special van, feed truck, LED advertising vehicle, the American school bus and Recreational Vehicle,etc.
Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck

We have got five first in the field of special automobile:
1.Sanitation car sales ranked first in the country;
2.Special vehicle production and sales ranked first in the country;
3.The first private enterprise pass the test of the A2, C2 three types of pressure vessel by once;
4.The first private enterprise through the enterprise qualification approval of low-speed truck test by once;
5.The first private enterprise through the new national standard of fire acceptance.
 Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck
Any interest of high altitude work truck, pls contact us .




  Aerial work vehicle refers to a vehicle that is capable of lifting up and down the operation of a hydraulic cylinder which is controlled by hydraulic or electric system for more than 3 meters.
Aerial work vehicles generally have folding arm, telescopic arm, mixed arm, self-type, scissors  five series.
The structure and working principle of the aerial work vehicle are as follows:
1, the high-altitude work vehicles take force device.
Take the power device from the pump, take the device, the soft axis of the cable composition.  
2, the high-altitude operation of the car rotation agencies
Rotary mechanism made of the hydraulic motor, planetary gear reducer, slewing ring and other components. Its working principle is: hydraulic motor drive reducer, reducer output shaft on the pinion rotation to promote the rotation support, so that turntable rotation.
3, the high-altitude operation of the central rotary joint
Central rotary joint, installed in the turntable rotation center, to solve the work of the sub-frame relative to the ground static, the upper rotation.
4, the high-altitude operating vehicle hydraulic system
The hydraulic system is supplied by a main pump. The working pressure is 14Mpa and the flow rate is 25L / min. The working pressure is set by the relief valve. Working principle: When the force gear gear, the main pump running, fuel tank through the oil pump output, reach the leg operation valve. After the operation of the legs, the allocation of the handle to the car, then hydraulic oil from the legs to switch to the car on the bus, part of the car can work.

 
Specification
  ISUZU 12m high altitude operation Truck
  Right /Left hand drive with air condition
  Chassis Model S215060JGK16
  Gross weight kg 6850
  Curb Weight kg 5400
  Overall Dimension mm 7500×1995×3220
  Wheelbase mm 3360
  Axle load kg 1935/3880
  Approach/ Departure angle (°) 18/12
  Wheel Track Front mm 1610
  Rear mm 1550
  Minimum Ground Clearance mm 400
  Engine CE20F, Turbo , In line, Diesel
  Power kW 76
  Engine manufacturer Chaochai Engine Power Co., Ltd
  Fuel Consumption L/100Km 11-14
  Fuel Tank Capacity L 100
  Fuel type Diesel
  Tires 7.00R16
  Maximum Speed km/h 90
  Maximum Grade ability % 22
  Minimum Turning Circle m 16
  Max. Brake Distance(Fully laden,30km/h) m 9
Configurations of upper load 1.     2-foldable arm
2.     4 units of H type hydraulic legs
3.     Working platform: 1000*500*900 mm ; rotate 360 degrees ; load capacity 200kg.
4.     Hook: 1 tons load capacity.


High Lift Platform Truck Show

Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck
Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck
Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck

Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck


Q&A
1.Q: Are you a manufacturer or trading company?
A: We are manufacturer. You are welcomed to visit our factory.
Factory Address: Chengli Automobile Industrial Park, South Suburb, Suizhou, Hubei, China 
2.Q: What kind of payment do you accept?
A: We accept T/T and L/C usually. 
If you want to use others payment, contact us for confirmation.
3.Q: Can you customize trucks according to customers' need?
A: Yes, product customization service is our speciality.
4.Q:What's your after-sale service?
A: We provide technical support for our products.
 Besides, we also provide  spare parts as long as customers need.
5.Q: What's your delivery time?
A: It depends on the quantity, usually takes 10-15 working days.

Chengli automobile co.,Ltd covers an area of about 67 hectares, more than 8000 employees, production and sales of various special vehicles more than 300 kinds.
Our company is keeping growing during 15 years. Our sales revenue reached 400 million dollars and exports reached 20 million dollars in 2016.  
Our leading varieties include refuel tank truck, LPG tanker,sprinkler, tank truck, garbage truck, suction truck, sewage suction truck, dump truck, van, trailer, wrecker, truck cranes, aerial vehicles, coach cars, bulk cement truck, chemical trucks, fire truck, cement mixer, tractor and other eight series of more than 300 varieties of models. Special van, feed truck, LED advertising vehicle, the American school bus and Recreational Vehicle,etc.
Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck

We have got five first in the field of special automobile:
1.Sanitation car sales ranked first in the country;
2.Special vehicle production and sales ranked first in the country;
3.The first private enterprise pass the test of the A2, C2 three types of pressure vessel by once;
4.The first private enterprise through the enterprise qualification approval of low-speed truck test by once;
5.The first private enterprise through the new national standard of fire acceptance.
 Isuzu 4X2 Aerial Work Boom Lift Vehicle 12m High Altitude Operation Truck
Any interest of high altitude work truck, pls contact us .




 

Compressor Wheel

Compressor Wheel,Billet Compressor Wheel,Billet Turbocharger Compressor Wheel

Cable Tray Roll Forming Machin co,.ltd , http://www.jsrollformingmachines.com