1. put light oil onto product  1. pack product individually by bubble bag 1. Provide customized Sevice: could make product for customer according to customer samples or drawings Q1: What's your MOQ?                     A1:Our MOQ is depending on the weight, basically is 200kgs per order.         Q2: Do you offer free sample? A2:we can provide you a sample but you need to pay for it and the freight ,paypal and west union payment method is also accepted                                                                                                Q3: Are you manufacturer or trader? Q4: Can you make packing and logo as customer request? A4: Yes .we can .but you should pay for the extra cost caused .
Process:
The foil roll is introduced into the rubber roller of the feeding device via the decoiling machine and then would in the winding former after passing through the edge of the shearing machine and the roller wheel of the burr pressing device. The inter layer insulation coil is erected in the rear of the coiling optical shaft of the Foil Winding Machine and wound in the winding former after sheared by the trimming roll and the shears blade.
Functional feature:
1. The device adopts and electrical servo deflection correction system to achieve manual/automatic adjustment of the foil position more conveniently and reliably.
2. An advanced electrical control technology of constant tension is adopted to control the tension of the foil and the inter layer insulation, with the features such as quantitive, accurate and convenient control of the tension no mechanical friction. The required tension can be maintained for forward winding, stop and backward winding, ensuring compact coils.
3. The inter layer insulation adopts a cantilever mechanism, convenient for feeding and the mechanism can be pulled out as a whole without guide rails outside the body.
4. Automatic welding mechanism and roll shearing mechanism adopt ball screws and linear guide rails for drive, ensuring the service life and accuracy of the device.
5. This device first adopts the all-in-one sing frame, solving problems such as few coil urns and deflection correction lag.
6. This device is a hi-tech product produced by combining with actual production on the basis of many similar products at home and abroad. The whole machine is controlled via an advanced PLC touch screen, with high automation level and simple and reliable operation, representing higher production level of domestic foil winding machines.
Foil Winding Machine Cnc Winding Machine,Foil Winding Machine,Cnc Wire Winding Machine,Hv Foil Winding Machine JINAN EURO-ASIA MACHINERY CO., LTD , https://www.eaelectricmachine.com
Product Description
1) 15years' production experienceÂ
2)Â Â Material:SPCC, SGCC, Stainless Steel, Carbon Steel, Mild Steel, Aluminum, Aluminium Alloy etc.
3)  Product range: sheet metal fabrication, auto parts, motorcycle part, construction hardware, metal cabinet etc.OEM Cold  stamping welding steel parts with best priceÂ
4)Â Â ISO9001-2000Â
5)Â Â OEM is welcomeÂ
6)Â Â Has ability to help with customer design and deveop new project.
Stamping Detailed Information
Material
stainless steel ,carbon steel ,alloy steel, brass, aluminum,etc.according to customer drawings and specifications.
Process
Mould design, Mould making,Stamping, deep drawing,bending, punching, laster cutting,threading,welding, tapping, riveting, grinding
Surface treatmentÂ
sand blasting, polishing, plating, acid treatment, anodizing, painting, powder coating,passivating,electropolishing,Hot galvanized, polishing, chrome/zinc/nickel plating
Thickness
0.5mm ~12mm, or other special as per customer requests
Report available
Material chemical compsition report, Mechanical Property report and dimenal report
PPAP Level III documents
Available
Drawing software
PRO/E,  Auto CAD,  Slid Work,  UG, etc
Lead time
30-45 days
Package
packaging no more than 35lbs per caton, pallet or crate outside packaging.
Application
Industrial machinery parts, Marine hardwares, Pipe Fitting Parts, Textile machinery parts, Sport facility parts, Pneumatic tools parts, Fluid equipment parts, Copper alloy parts, Food machinery parts, Auto parts, Elevator Parts, Air compressor Parts, Electric machine &Â hardware fittings, Mining &Â earthmoving machinery accessories, pump body and valve,Funiture hardware, electronice hardware, construction hardware, sheet metal processing,machinery parts, hydraulic fitting, etc
Manufacturing Workshop
Packaging Information
2. VCI packaging is available with desiccant
3. pack product individually by bubble bag or Foam packaging.
4. good quality carton pack by Grade A carton, each carton is no more than 35lbs
5. pallet or wooden case
For non-steel products:
2. good quality carton pack, each carton is no more than 35lbs
3. pallet or wooden case
Our Services:Â
2. Can deal with various drawings soft wares:  PRO/E,  Auto CAD,  Slid Work,  UG, etc
3. Could offer samples for freeÂ
4. Submit samples with official inspection reports including  Material chemical compsition report, Mechanical Property report and dimensional report
5. Can provide the Third Party Inspection Report
6. PPAP documents are available
7. Could provide at least one year quality guarantee after customer receives the products
8. We could supply storage service for customer if required.
9. Leadtime: 20days for samples, 30days for production.
Company Introduction
We are professional industrial components supplier from Jiangsu, East China, We worked with 60- plus strong manufacturers and our own factory which is located in Changzhou area. We have set up a rather consummate international marketing web with a group of stable clients, and our export trade extends up to a hundred of countries and regions)Our major product lines include various kinds of metal parts manufacturing, from all kinds of manufacturing process(machining, casting, stamping and so on).  We have gained the certification of ISO9000 control system by China certification center and some parts we offered having past TUV/GS test and CE certificated. We can do process control jobs,and SPC as customer requires.
FAQ
A3:We are both trader and manufacturer owning  a factory over 5000 sqm mainly producting aluminum/zinc die casting products and offer CNC machining srvices. Also we work with many long term stable outsourcing factories to supply all other processes produces for our customers.Â
Our Contact:
Tel: 86-25-68853056
Fax: 86-25-68853076
Â
Lacquered Materials for Medical Equippment/Die Casting