Launch of the new C-320NC double-column NC sawing machine bed

Gaosheng Precision Electromechanical Co., Ltd. has launched a new C-320NC double-column NC sawing machine bed. The Gaosheng C-320NC double-column NC sawing machine is equipped with a 5-horse sawing motor, a 34mm wide sawing belt and an independent control box for easy operation. This product features a gantry-style two-column design that is structurally strong and productive. It also adopts a large-diameter double-spindle design. When the machine performs the cutting action, the sawing force can be evenly distributed to the machine, reducing the vibration generated during sawing and providing a smooth cutting process for the production process. The Gaosheng C-320NC double-column NC sawing machine not only improves work efficiency, but also extends the life of the saw band and reduces the cost of wear. Gao Sheng C-320NC double column NC sawing machine is a good choice for you!

Automated high real CNC

The Gaosheng C-320NC double-column NC sawing machine adopts the SNC100 numerical control system, which has a higher degree of automation and truly realizes numerical control. The operator only needs to load, and other operations can be realized through the touch screen. You can input 100 sets of sawing required data (saw length and number of knives), automatic feeding of the machine, automatic fixed length, and automatic cutting. After executing a set of data, the next set of data is automatically executed, and the efficiency is greatly improved without manual setting. Make the one-man multi-machine watch mode a reality. In addition, the SNC100 numerical control system also has an error message feedback function, which can respond to the user's machine status in time, so that maintenance personnel can find and solve problems.

Stable and accurate working life

The Gaosheng C-320NC double-column NC sawing machine is made in Taiwan. It uses the international first-line brand original accessories to implement the EU industry standards and process requirements. The stability of the machine and the durability are greatly improved. The standard service life can reach 20800 hours. (Standard working day 10 years), the best use time is 2 times higher than similar brands. It also has good stability and precision, verticality: ± 0.1mm / 100mm. C-320NC also comes with automatic retraction function. After the cutting is completed, before the bow saw head has been lifted, the feeding vise will automatically pull the material back 2mm away from the cutting end face to prevent the saw band from scraping the material, which will help maintain the life of the saw band. While reducing the loss of materials and saw belts and reducing the workload of secondary machining, the C-320NC's practical two-column design ensures the smoothness of the saw bow ascending and descending and the stability of the cutting force, which can extend the life of the saw band. About 30%.

Safety is in place

The Gaosheng C-320NC double-column NC sawing machine has an independent control box. The electrical components are built into the electrical box and the door-type interlocking switch enhances the safety protection. The C-320NC special automatic detector is used to detect the signal of the drive wheel. Once the saw blade is destroyed, the driven drive wheel will stop working immediately. In addition, the vise platen switch will ensure the clamping performance of the workpiece, and if the workpiece is not properly clamped, the saw band will not be allowed to run.

The protective railing of the Gaosheng C-320NC is located on the rear side of the machine to prevent people from entering under the saw arm and on both sides of the sawing material to avoid unnecessary personal injury. Located in a prominent position on the control panel with a red emergency power switch (rubber material). This switch can be pressed in the event of a personal injury emergency or any abnormal or erroneous operation to emergency power off.

While ensuring safety, the Gaosheng C-320NC double-column NC sawing machine also has intimate chip removing brush and chip removing machine. The synchronous steel brush can effectively clean the iron chips on the saw belt, prevent the sawdust from remaining in the tooth gap, and extend the life of the saw belt. The shaftless hydraulic chip remover completely removes the iron filings generated during the cutting process. There is no need to manually remove iron filings and the motor is not easily burned.

Choosing Gaosheng C-320NC double-column NC sawing machine has become your helper. The cost of the enterprise will be greatly reduced in the later period, and the long-term economic benefits will be better.

(Finish)

Counter Flow Cooler

counter flow cooler suitable for pellet cooling,for example:wood pellet ,feed pellet .

Advanced counter flow cooling principle ,the cooling air flow goes toward the materical flow ,to avoid sudden cooling of material by direct contacting ,and prevent material from.

Sliding discharge system for uniform,mild discharge with less reminder.

Pellet temperature after cooling is less than 3-5°C above ambient temperature.

Other equipment such as debris machine, granulating units into supporting the use of the production line.

Counter Flow Cooler,Horizontal Pellet Cooler,Pellet Mill Cooler,Wood Pellet Cooler

Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachine.com