Product introduction
For bending steel bars of various diameters, there are several holes on the work plate to insert the bending pin shaft, and the center pin shaft of different diameters can be replaced accordingly.
Advantages of characteristics Stirrup Bender,Stirrup Bending Machine,Automatic Stirrup Bender,Rebar Stirrup Bending Machine Shandong Luteng Building Equipment Co., Ltd. , https://www.lutengmachinery.com
1, rubber strip method tire repair
The special tool (the awl with a hole at the tip) directly inserts the strip into the nail surface of the tire surface, commonly known as "beating tendon", which is the most used tire repair method in large-scale activities.
Advantages: quick and convenient, disadvantages: the wound will expand. 
After the inner tube is removed and cleaned, polish it with a blunt instrument and fill the gap with glue.
Advantages: It is used for a long time, the use of discounts, disadvantages: it is difficult to repair when the wound is large.
It is also a kind of internal tire repair. The stuffing of the tires is like a mushroom, and it is directly attached to the damaged part of the inner tube.
Advantages: good tire repair effect, disadvantages: expensive.
It is also a kind of internal supplement. It is generally used on relatively thick tires, such as truck tires. The patch is attached to the tire and then treated with a vulcanizer.
Advantages: The degree of bonding is relatively strong, and the disadvantage is that it tends to cause hardening of the tire.
5, tire fluid
It's quite simple to use, just hit the tire sealant directly on the nozzle.
Advantages: quick and convenient disadvantages: damage to the tires is relatively large. 
Summary: The first type of rubber stripping method can be selected quickly and conveniently, and the second patch can be selected for the sturdy and durable method.
( Text from Wuyang Honda Yangyang Service )
Steel Bending Machine, one of steel reinforcement processing machinery.
The working mechanism is a horizontal working disk rotating on the vertical axis. The steel bar is placed in the dotted line position in the diagram. The supporting shaft is fixed on the machine tool.
Applicable to all kinds of round steel, carbon steel, screw steel.
It has strong operability, high working efficiency, convenient Angle adjustment and neat bending
Operation procedures of steel bending machine:
1. Check whether the mechanical performance is good, keep the working table and bending machine surface level;
And prepare various spindle tool blocks.
2. According to the requirements of the diameter of steel bar and bending machine, the core shaft, forming shaft, iron shaft or variable structure shall be installed. The core shaft diameter shall be 2.5 times of the diameter of steel bar.
Check the core shaft, block and turntable shall be free of damage and crack, and the protective cover shall be tightly fixed and reliable, and the operation shall not be performed until it is confirmed that the air machine is running normally.
Iv. During the operation, insert the bend end of the steel bar into the clearance provided by the turntable for fixation, and fix the other end close to the fuselage and press it with your hand to check the fuselage fixation.
The side that actually holds the steel bar can be moved.
It is strictly forbidden to change the spindle, change the Angle, adjust the speed and so on.
When bending steel reinforcement, it is strictly forbidden to process steel reinforcement diameter, root number and mechanical speed beyond the mechanical specification.
When bending high hardness or low alloy steel bars, the maximum limit diameter shall be changed according to the mechanical nameplate, and the corresponding mandrel shall be replaced.
8. It is strictly forbidden to stand in the working radius of the bending steel bar and the unfixed side of the fuselage.
Curved semi - finished products should be stacked neatly, curved hooks should not face up.
When the turntable is turned, it must be done after it has stopped.
X. completion of operation, cleaning of site, maintenance of machinery, power off lock box.
Motorcycle tire repair several practical tips
Motorcycle users often encounter tires being punctured by nails or foreign objects when driving on a daily basis. The following small series introduces several common tire repair methods:
2, patch tire repair method
3, "Mushroom nails" tires
4, fire to make up