1-Aminoanthraquinone CAS NO.:82-45-1 1-Aminoanthraquinone Cas No.:82-45-1,Latest Dyes 1-Aminoanthraquinone,Dyestuff Intermediate 1-Aminoanthraquione,Pure Dyestuff 1-Aminoanthraquinone SHANDONG MINGDE CHEMICAL CO.,LTD. , https://www.sdmingdechem.com
Portable diesel generator tank internal structure and how to repair?
The fuel tank is a container for storing diesel fuel. It is generally stamped and welded with steel plates, and its inner surface is usually treated with anti-rust treatment. In order to prevent foaming of the diesel fuel in the fuel tank after it has been subjected to severe impact, the interior of the fuel tank is generally partitioned into more space. The part above the tank is the filler port, and the underside of the filler port is the filter screen. In order to avoid the vacuum inside the tank during use, vent holes are generally drilled in the upper part of the fuel tank cap. The bottom of the tank is equipped with a drain port.
1. The vulnerable parts of the fuel tank:
The parts that are easily damaged during long-term use of the fuel tank are the welding point of the oil pipe inside the fuel tank and the external welding points. When the internal solder joints are fused or have blisters, the diesel generator may be unstable or shut down during operation. In addition, if the bottom of the tank too much impurities, the above phenomenon will occur.
2, the failure of the tank damage:
Caused by the occurrence of false welding or trachoma in the welded part of the fuel tank is due to the fact that the manufacturer's welding quality is not excessive or there is a large shock during transportation.
3, after the repair of the fuel tank damage:
When the welded part of the fuel tank inside the outlet pipe is welded or there is a gas leak, remove the oil pipe outside the tank and remove the oil outlet pipe inside the tank. After the oil pipe is damaged, it can be welded by brazing method. After welding, the tightness of the outlet pipe should be checked.
When there is a false weld or trachoma in the external welding area of ​​the fuel tank, common electrodes can be used for welding. The diesel oil inside the fuel tank must be cleaned when the single welding is performed.
When there is too much impurity at the bottom of the fuel tank, use diesel or gasoline to clean it, and then unscrew the drain screw at the bottom of the tank to clean the diesel containing impurities.
Related reading :
Shanghai Ito Power Co., Ltd. Main : Ito Gasoline Generator , Ito Diesel Generator , Ito Small Pump , Ito Digital Generator , Ito Electric Welding Machine