Rotary Knob switch can be used to replace traditional resistance potentiometer simulation function of rotating pulse generator, the rotary switch are normally used in the instrument front panel and audio control panel man-machine interface, rotary switch orthogonal optical encoder as pure digital device to replace analog potentiometer, the rotary switch on the appearance similar to traditional or resistive potentiometer, but the internal structure of rotary switch completely and use digital optical technology. Similar to traditional incremental encoder products have two orthogonal output signal channel A and B), can be directly connected with the encoder processing chip. Knob Switch,Zinc Die Casting Knob Switch,Chrome Plated Knob Switch,Knob Slide Switch NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.diecastingdie.com
The battery GPS positioning anti-theft tracker is a GPS anti-theft module built into the battery.
Compared with the previous battery anti-theft methods, the advantages of the battery GPS anti-theft device are: After the battery is stolen, it can be tracked through the monitoring platform, feedback to the monitoring platform, tracking and recovery, and capture criminals. This is what the past battery anti-theft solutions can't do.
Base station battery anti-theft GPS anti-theft tracking module is placed in such high-risk base stations bait "GPS anti-theft tracking module", according to the stolen batteries in the "GPS anti-theft tracking module" location data to find out sales channels and criminals. GPS satellite position function: The anti-theft tracking module will be equipped with a GPS module. The preset monitoring center can query the operation status of the terminal.
The battery GPS positioning anti-theft tracker has the following features:
1. Highly concealed. The equipment is installed inside the single battery and no trace of installation can be seen from the outside, so criminals cannot destroy the anti-theft device.
2. Ultra-low power consumption. Standby power consumption 15 microamps. Does not have any effect on the battery itself.
3. Installation convenience.
4. Platform Concentration.
At present, in Henan Tower, Shandong Tower, has been widely used, and achieved good results, successfully assisted in recovering dozens of cases of battery theft and successfully captured criminal suspects.
Rotary switch knob is to control the main contact a switch on and off. The structure of rotary switch has two kinds, which is one unit structure and more than a multipolar structure. Single unit rotary switch in the application of commonly used jointly with rotor potentiometer, while more than a multipolar rotary switch used for switch working state lines.
Tower battery how to achieve anti-theft alarm and positioning tracking?
Relatively weak management of base station personnel in relatively remote locations is relatively weak. The most common occurrence in these base stations is the theft of base station batteries. Although the alarm system was installed in the base station, because of geographical location and other factors, the lawbreakers stole the base station battery before the arrival of the staff and police personnel. To solve this problem, an intelligent anti-theft system based on GPS global satellite system and GSM mobile network was designed.