Reversing good assistant - reversing image

Reversing good assistant - reversing image

Introduction: The functions of Hyundai Motor are becoming more and more intelligent. Among them, the reversing image technology is becoming more and more mature. The reversing image is like the driver's third eye and can observe every move in the car. The reversing image is more intelligent than the reversing radar. The reversing radar is based on sounds. After years of development of the reversing image, the reversing radar system has upgraded the technology and improved the performance, regardless of the structure and appearance, or the performance price. , Today's products have their own characteristics, the most used is the digital display, screen display and multi-function reversing mirror display these three.

Previously, people relied on the rearview mirror basically, but due to its own limitations, the rearview mirror had a large dead angle, which caused accidents during reversing. With the reversing camera system, a far-infrared wide-angle camera is installed behind the car. Through the display in the car, obstacles behind the car can be clearly seen. At this point, the reversing image will replace the reversing radar, and it will be clear even if it passes through infrared rays at night. Professional car probes are further enhanced in magnetic, shock, waterproof, and dustproof performances, and the reverse image can be intuitively visible to the rear of the car, which can be said at a glance. Nowadays, more advanced reversing images can also be provided with auxiliary lines, giving the driver a more accurate reference. This not only makes the entire reversing process easier and faster, but also ensures the safety of life and property of himself and others.

However, the reversing image is not a panacea. It still has a certain degree of dead space. After tests, if the rear-view doll is still standing, 56% of the drivers will only hit the doll with the reversing video system. This is also a There is a high probability that in order to avoid dangerous accidents, the majority of drivers can not only rely on reversing images, but also have to raise their vigilance at the same time, and always put their safety at ease.

Tongue And Groove Face Flanges

The Tongue and Groove faces of this flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into it's face.

Tongue-and-groove facings are standardized in both large and small types. They differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter. These are commonly found on pump covers and Valve Bonnets.

Tongue-and-groove joints also have an advantage in that they are self-aligning and act as a reservoir for the adhesive. The scarf joint keeps the axis of loading in line with the joint and does not require a major machining operation.

General flange faces such as the RTJ, TandG and the FandM shall never be bolted together. The reason for this is that the contact surfaces do not match and there is no gasket that has one type on one side and another type on the other side.

Tongue And Groove Face Flanges,Tongue & Groove Flange,Groove Flanges,Tongue And Groove Joint Flange

Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com