The 5T motor car in the additional hydraulic support is used in the L3216 wind lane yard and wind lane.

2, L3216 wind lanes and wind tunnels laying rails and winches and other transportation facilities must be organized by the dispatching room to organize the power department, production department, safety supervision department, transportation team and other business functions team to accept the inspection, after the qualified can be put into use the motor car, otherwise Do not use.

3. Before the motor car enters the well and the ground is used, the transportation team must have a special person to cooperate with the motor vehicle driver to check the integrity of the electric motor vehicle. The motor car is not in good condition and is strictly prohibited. And do a special inspection record.

4. L3216 wind lane is transported by 5T electric motor and JD-25 winch.

5, motor car drivers must undergo professional training, the test is qualified, and the certificate is on duty.

6. Security measures:

1) On duty, special personnel must be arranged to carry out a good inspection of the laying of the track, and find problems and safety hazards in a timely manner, otherwise stop the transportation.

2), by hooking the hook to the head of the insurance rope, while hanging the small winch hook head on the first ring of the direction of the outside of the flatbed, and the tractor can pass the inspection before passing.

3) When pulling, the driver of the small winch will first tighten the wire rope, then the signal will send a signal, and it is strictly forbidden to send the driving signal when there is a diagonal rope.

4) In the running process of the electric motor car, the car mechanic must pay close attention to the running condition of the vehicle and the running condition of the steel wire rope, and immediately stop the abnormal treatment.

5) When the winch is towed, the motor car is not allowed to be used with the brake except for special circumstances.

6), the motor car must have good braking and lighting devices, sand volume and sand quality must meet the requirements, hung red taillights.

7) Unqualified bolts and chain links shall not be used. Unqualified mine cars are strictly prohibited from going on the road. "One slope and three gears" are in good condition and are in normal use.

8) Before each transportation, the winch, wire rope and track must be thoroughly inspected by a special person.

9) When transporting, the driver of the motor car must conduct a comprehensive inspection of the integrity of the motor car. All kinds of protection and facilities must be completed.

10) The winch signal must be sensitive and reliable, not clear and accurate, and must not be driven. Motor vehicle drivers and winch drivers must be certified to work and strictly implement the "Technical Operation Procedures" of this type of work.

11) When the winch relay is changed, the car must be stopped first, then the car is blocked by the car, and then the hook is removed. When the hook is changed, it must be directed by the on-duty monitor.

12) During the transportation process, the operating range of the small winch and the bracket car used shall not be operated or stayed except for the mechanic. The driver must work outside the wire rope 5m away from the bracket. It is strictly forbidden to operate other vehicles on the track where the electric motor car runs. It is strictly forbidden for the operator to pick up the car, brake the car, disperse the car and take the motor car.

13) When the wind lane is changed to the slope, the safety door should be closed in time after passing the car, and the safety door and the car stop must be in the normally closed state.

14) The following measures are strictly implemented when the motor car is transported with the winch:

[1], the driver of the motor car should be familiar with the track condition and choose the speed reasonably;

[2] The motor car shall not be operated with a brake, and shall be towed by a winch, and the motor car shall not be braked.

[4] The driver of the electric motor car must cooperate closely with the driver of the winch to ensure safety.

15), the motor vehicle driver must strictly enforce the "new spirit of coal mine safety management system assembler" in "4.3.17 motor vehicle use management assessment approach" and "Coal Mine Safety Regulations" in section 348, 349, 351 requirements and spirit New Minerals (2003) No. 018 "Procedures on the Relevant Management of Motor Vehicle Operating Parameters".

16), L3216 fully mechanized mining face wind tunnel small winch use strict implementation of Lingxin Mining (2003) No. 054 "on the relevant provisions of small winch lifting transport"

Anti Mold Sealant

Anti Mold Sealant,Antifungal Sealant,Anti Mold Glass Silicone Sealant,Anti Mold Cure Glass Sealant

Shandong Tongchuang Rubber Industry Co.,Ltd. , https://www.tcadhesive.com