The arrival of a small displacement "T" era

Recently, a number of new cars have been listed, and there are plans to add "T" engines. The reporter learned from the interview that the newly-listed Xinyue 1.6T models will be put into production at the third factory next year, and Chevrolet Aveo will also launch plans with the “T” model. The new 1.6T will be added to the model and so on. . In this regard, the industry believes that in today's increasingly growing automotive technology, the "T" turbocharger and other technical means applied to the engine, can better achieve the balance of low-emission and high-performance, will gradually become major manufacturers The future development trend.

Volkswagen is the pioneer who brings the "T" model to China. At present, the Volkswagen domestic models basically carry models equipped with "T" engines. And "T" turbocharger technology in improving the engine's power and torque, so that the car is more vigor, while taking into account economic and energy saving, highly sought after by consumers. The reporter learned from interviews in the auto market that most of the purchases with “T” models are driven by young people who are motivated to control their power, and they are not afraid to pay more for “T” technology.

"T" turbocharging technology will gradually cover the entire car. Chevrolet said that it does not rule out the launch of the "T" love CD-Europe model. Not only small cars, but also compacts such as New Evonik also have "T" plans. As Cruze is selling the “T” model, the introduction of “T” in mid-to-high-end cars has become a trend. At the end of February, ChangAn Ford launched a new 2.0T Mondeo to win the victory to change the shortcomings of the old models lack of power, listed in the first month sales broken seven thousand. In addition, the Citroen C5 will launch a model equipped with a 1.6T engine in the second half of this year, while a model equipped with a 1.8T engine will be available next year. In terms of imported cars, BMW will also fully promote the "T" plan. It is reported that from September to the end of this year, BMW's new Z4, new 5 Series and new X3 3.0 displacement models will gradually be replaced by 2.0T engine; then BMW new generation 1 series, new generation 3 series, new 6 series and new The X1 3.0 and 3.0T models will also be equipped with 2.0T engines. In addition, 2.0T turbocharged models will be introduced on the top model BMW 7.

Batch Waste Tyre Pyrolysis Plant

Batch Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Batch Waste Tyre Pyrolysis Plant

Flowchat of Batch Waste Tyre Pyrolysis Plant

Batch Waste Tyre Pyrolysis Plant

Advantages of Batch Waste Tyre Pyrolysis Plant

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.

ITEM

PROJECT

1

Equipment Model

XY-7

XY-8

2

Door Model

Full Open Door

Full Open Door

3

Suitable Raw Materials

Rubber/Plastic Products

Rubber/Plastic Products

4

Structure

Horizontal Type Revolves

Horizontal Type Revolves

5

Reactor Size

Φ2200*6000mm Φ2600*6600mm

Φ2200*6000mm Φ2600*6600mm

6

Capacity for One Batch

5-6Mt; 8-10Mt

5-6Mt; 8-10Mt

7

Oil Yield of Tires

40%-45%

40%-45%

8

Work Pressure

Normal Pressure

Normal Pressure

9

Reactor Rotation Speed

0.4R/M

0.4R/M

10

Fuels Choice

Coal, Wood

Coal, Wood, Gas, Oil

11

Power

18KW/H

18-25KW/H

12

Cooling Method

Water Cycling

Water Cycling

13

Type of Drive

External Annular Gear

External Annular Gear

14

Heating Method

Direct

Direct

15

Type of Installation

With Foundation

With Foundation/Integrated Base

16

Noise dB(A)

≦85

≦85

17

Operation Mode

Intermittent Operation

Intermittent Operation

18

Total Weight(MT)

25-40

25-40

19

Installation Space Required

30m*10m

30m*10m

20

Manpower

3~4/batch

3~4/batch

21

Shipment

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Batch Waste Tyre Pyrolysis Plant,Waste Tyre Pyrolysis Plant,Rubber Pyrolysis Recycling Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com