The light truck air brake is "flavorless" or "steak"

Nowadays, more and more light trucks have begun to install air brakes. Air brakes have relatively high cost relative to oil brakes. Previously, only heavy-duty heavy-duty trucks were used.

Now, if you put it on a light truck, there is no need for it. It's a waste of money, and it's a worthy steak. Xiao Bian now reads in detail through the following questions, and welcomes you to watch the audience.

Ao Ling CTX

What is the difference between an air brake and an oil brake?

The fundamental difference between the air brake and the oil brake is that the medium that transmits the brake force is different. In terms of image, it is equivalent to using a piston to push an object. The oil inside the piston is the oil brake, and the piston inside is the gas brake.

Due to the difference in media, one is oil and the other is gas. Oil is a liquid and cannot be compressed; gas can be compressed. This leads to the ability to hold more air in the same volume, and the pressure of the air pressure will be much greater than the oil pressure. Therefore, the air brake can also generate greater braking force, and the air brake must be used on the medium and heavy cards to meet the requirements.

Le Mans race site

Similarly, with the incompressible nature of the liquid, the brake stroke of the oil brake is fixed, and the speed of transmitting the brake force is faster and more sensitive than the conventional air brake. The cost of oil brakes is also lower than that of air brakes, so oil brakes are commonly used in small cars such as light trucks.

Why is a light brake installed on the light truck? Is it a "chicken rib" or "a steak?"

Now there are many light trucks equipped with air brakes. The front is not to say that the medium-heavy trucks are installed. Now that the light trucks are also installed, Xiao Bian has come to analyze them.

Le Mans race site

Nowadays, more and more people and cars need to brake very often when driving. Especially in the hilly areas in the south, mountains are winding around and the working conditions are not good. General oil brakes have been unable to provide sufficient braking force for trucks such as light trucks in steep downhills, sharp turns, and sudden braking. At this time, an air brake light truck is required. Then the air brake light truck is really good, but fortunately where? This coincides with this time Foton Aoling organized a light Kalamei race, with the vehicle is also the air brake version, we take this participating vehicle - Futianao Bell CTX Cummins 2.8L air brake version to example analysis.

Since it is an example analysis, then still look at the users of this air brake version of the model how to say it, for this, the China Truck Network reporter specifically to the live event site interviews, to bring first-hand users of card users .

Tan Jianli, a driver from Hunan Xingsha Logistics Investment Co., Ltd., said: “I had been driving the trailer for more than ten years. I learned that there were still trucks. I came to participate. After coming to the scene, I I feel that this track is very professional, full of sharp bends, and the road is also more in line with the road surface of the truck. It is not smooth. At the start of the race, I feel that this car should not conquer this track. I did not expect it. The car was really good at the game, in the process of frequent braking and turning, the brakes are not frustrating, very sensitive, the steering is very smooth, not stiff, and the speed is very fast, especially on the brakes, before I was worried about gas Although the braking force is large, the braking is not so fast. Today, it is open on the track, and it feels completely unnecessary to worry about it. It is similar to an oil brake."

Listening to Master Tan, this car is really good, that is, it has the advantage of large brake air brake force, and it can also achieve the same short braking time, braking distance and oil brake.

So how does this car have the advantages of air brakes and oil brakes? The Chinese truck network reporter interviewed the technicians of Foton Aoling.

Through the technical staff's answers, we learned that the Foton Aoling CTX air brake system increases the pressure of the air brake cylinder, making the brake increase the transmission speed to keep up with the braking speed of the oil brake. Although the technical staff said that the understatement, but the air brake pressure increases, the gas tank and air pump requirements will have a great increase, it seems that the birth of Futian Ao Ling CTX steam brake version is also spent a lot of effort.

Although the air brake version increases the price due to the increase in cost, this part of the difference can be used in exchange for a safer driving environment, can pull more cargo, and can brake as fast and short as the oil brake. The value is still not worth, I believe everyone has the answer in mind, if the air brake version can do like the Foton Aoling CTX's steam brake version, there is no doubt that it will be very "practical and delicious" "steak."


Decoiler straightener feeder machine in the short space design were especially developed to meet the needs of customers with not enough space. They offer process reliability even for the most demanding materials. They are optimally suited for the manufacture of structural parts as well as for processing of high-strength materials â€“ even for the higher ranges of strip thickness.

Recently, feeder-Straightener up to 2000 mm stock width and approx. 9mm thickness, coil loading up to 20tons.

The principles of Decoiler Straightener Feeder is that the motorized Decoiler (Coil Reel) with  drive continually moves the strip into a bottom coil loop supplying the Feeder-Straightener,and then feed the strips into the Power Press Machine as well.

Decoiler Straightener feeder machine is widely used in sheet metal stamping, auto parts industry, hardware stamping industry, home appliance industry, electric appliance industry and etc.


Decoiler Straightener Feeder

Decoiler Straightener Feeder,Automatic Decoiler Straightener Feeder,Punch Press Servo Feeder,Uncoiler Straightener Feeder,Uncoiler Straightener And Servo Feeder,3 In 1 Nc Servo Uncoiler Straightener Feeder

Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com