The need to pay attention to the installation of diesel generator sets
Posted on

Today I would like to talk to you about the six points that diesel generators need to pay attention to during installation. Through these 6 points, I hope to help you and make your life more convenient. Let us take a closer look at the six points that diesel generators need to pay attention to during installation.
1. The installation site should be well ventilated, the generator end should have sufficient air inlets, and the diesel engine should have a good outlet. The export area should be greater than 1.5 times the area of ​​the tank.
2. Keep your surroundings clean and avoid any objects that may generate corrosive gases and vapors, such as acids and alkalis. Fire extinguishing devices should be equipped with conditions.
3. For indoor use, the exhaust pipe must pass the guide, the outdoor pipe diameter must be muffler or the diameter of the pipe, and the elbow of the pipe should not be more than three in order to ensure that the pipe must reach 5-10 degrees to avoid rainwater injection; The exhaust pipe is installed vertically and it must be equipped with a rain cover.
4. When using concrete, the water level should be measured during installation time in order to fix the unit on a level surface. There should be a special cushion or anchor bolt between the unit and the foundation.
Unit 5, the shell must be reliably grounded and protected, and a generator with a neutral point directly grounded is required. It is a neutral point and lightning protection device that must be grounded in a professional. Never use a neutral grounding grounding device for direct grounding.

PRO-SCAN Screw Wear Inspection Service

Extruders are a very common piece of equipment in today`s facilities and PromaXX Service Team has an extensive record with extruder maintenance service. We provide expertise with preventative maintenance plans, barrel inside checks, and training services, ensuring maximum productivity and extremely energy-efficient operation.

Pro-Scan Screw Wear Inspection Service,Screw Wear Inspection Service,Screw Wear Inspection,Screw And Barrel Measurement

Jiangmen PromaXX Extrusion Technology Co.,Ltd. , https://www.extruder-service.com