Dump trucks have always been "road killers" in people's impressions. Why is this so? Because they are running faster, because the profitability of freight is relatively low, in order to make more money, the drivers have to run faster, and the result can be imagined. Not only that, but also in the process of transportation is also easy to spill, seriously affecting the city's cleanliness, but also bring some harm to the traffic. In response to these problems, a new type of slag truck has emerged, specifically designed to solve the problem of overloading, over-regulation, unified management, missing spills, and driving safety. What characteristics does it have?

1. The size of the large box is regulated so as to limit the quantity of cargo loaded. The sealed structure at the upper part of the large box is used to prevent dust from escaping. If the closed mechanism is not closed, the engine is limited to idle operation. The normal operating speed of the new type of slag truck is generally limited to below 60km/h, which is achieved by controlling the engine through the on-board terminal. If someone wants to cleverly remove the car terminal, then I am sorry that the car will not be able to hit the fire. Because the engine will periodically issue an inquiry signal to the terminal, if the terminal is dismantled, the engine will not receive an answer, so it will strike.

2. The large box of the new slag truck has a closed mechanism at the top to prevent it from coming out, and there is a requirement that the large box's body should not leak much soil for 10 minutes. In addition, the large boxes of vehicles are to be speed-limited when they are in a raised state.

3. The supporting muck management platform will be established in the cities where the standards are implemented, so that the operation status can be observed through the onboard camera in time. At the same time, through the GPS function of the vehicle terminal, the vehicle's running route and operating range can be set so that when the residue truck violates the limit, it can immediately limit the speed and upload its violation record. Not only that, as long as the dump truck is not dumped at the dump site, it will immediately upload the violation record, thus restricting the behavior of the dump truck driver.

4. In the vehicle, a camera and radar combined blind zone monitoring system is installed to solve the situation in which the driver warns the blind area of ​​the driver when steering, thereby increasing the safety of driving.

Although the car is not yet completely universal, it is believed that it will become more and more popular in the near future.

Slewing Mechanism and Spare Parts

A slewing mechanism is an essential component of a Tower Crane that allows it to rotate horizontally. It enables the crane to reach different areas of a construction site without having to move the entire structure.

The slewing mechanism typically consists of the following components:

1. Slewing Ring: The slewing ring is a large circular bearing that supports the entire weight of the crane and allows it to rotate. It is usually located at the base of the crane and is designed to withstand heavy loads and provide smooth rotation.

2. Slewing Motor: The slewing motor is responsible for providing the necessary power to rotate the crane. It is connected to the slewing ring and is controlled by the crane operator.

3. Gear Mechanism: The gear mechanism consists of a set of gears that transmit the power from the slewing motor to the slewing ring. It ensures smooth and controlled rotation of the crane.

4. Brake System: The brake system is an important safety feature of the slewing mechanism. It is designed to hold the crane in place and prevent any unintended rotation when the crane is not in operation.

5. Control System: The control system allows the crane operator to control the rotation of the crane. It typically includes joysticks or buttons that enable the operator to start, stop, and control the speed and direction of rotation.

Overall, the slewing mechanism plays a crucial role in the functionality and versatility of a tower crane. It allows the crane to move horizontally, reach different areas of a construction site, and perform various lifting tasks efficiently.

Slewing Motor, Tower Crane Spare Part,Slewing Mechanism,Slewing Reducer,Slewing Bearing,Tower Crane Slewing Motor

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com