Drying oven drying box is a commonly used instrument and equipment, mainly used to dry the sample, can also provide the temperature environment required for the experiment. Drying box application and chemical, electronics, casting, automotive, food, machinery and other industries. Generally divided into Galvanized steel plate and stainless steel liner, pointer and digital display, natural convection and air circulation, conventional oven and vacuum type.
Scope of application: Electric blast drying box (hot air disinfection box) is for industrial and mining enterprises, laboratories, research institutes for drying, baking wax, sterilization.
Control features: It has parameter memory protected by data loss due to power outage and dead status, and the call recovery function.
The current domestic new type oven has the characteristic features:
â—†Using the first domestic streamline arc design, the shell is made of cold-rolled steel plate, and the surface is electrostatically sprayed;
â—† The temperature control system of this machine adopts microcomputer single chip technology, temperature control, timing, over temperature alarm;
â—† Reasonable duct and circulation system, so that the temperature uniformity of the working room changes little;
â—† Displayed as dual-screen high-brightness digital tube display, indicating value is accurate and intuitive, superior performance, touch buttons to set the adjustment parameters;
â—† The temperature control sensor adopts the capacitive imported components;
â—† With timing and timing functions;
â—† The inner liner is made of mirror stainless steel; the semicircular corners are easy to clean;
â—† The shelf in the working room can be adjusted to any height and shelf size as required by the user;
â—† The use of imported motors and fan blades, micro-wind circulation, allows users to eliminate doubts about the training of small or powdered items;
â—†The door has a large viewing angle and heat-resisting tempered glass, which is easy for users to observe. The use of nano-material door seals and insulation materials makes the performance of the whole machine more superior. Vacuum drying oven vacuum drying oven is designed to dry heat-sensitive, easily decomposed and easily oxidized substances, The inert gas can be flushed into the interior, and especially some of the complicated components can also be quickly dried.
Scope: Vacuum drying oven is widely used in biochemical, chemical pharmaceutical, medical and health, agricultural research, environmental protection and other research and application fields, for powder drying, baking and all kinds of glass containers for disinfection and sterilization only. It is particularly suitable for the rapid and efficient drying of dry heat-sensitive, easily decomposable, easily oxidizable substances and complex ingredients. Vortex flowmeter structure and working principle Electrothermal vacuum drying oven shell is stamped and folded by steel plate, welded and molded. The surface of the shell is coated with high-strength electrostatic spray coating and the film is smooth and firm. The studio uses a carbon steel plate or stainless steel plate folded and welded to form a thermal insulation cotton between the studio and the housing. The interior of the studio houses a test shelf for placing various test items, and an mica heater is installed around the outside wall of the work room. The door seal is sealed with a silicone rubber strip, and a sight glass is provided on the door for observation. Electrovacuum vacuum drying chamber evacuation and inflation are controlled by the solenoid valve, electrical box in the box on the left or lower, the electrical box on the front panel with a vacuum gauge, temperature control instruments and control switches, etc., electrical boxes are equipped with electrical components.
Electrothermal vacuum drying oven can maintain a certain degree of vacuum in the working chamber and use intelligent digital temperature controller to set, display and control the temperature. The temperature regulator adopts computer technology to collect and process the temperature signal in the working chamber, so that the temperature in the working chamber is automatically maintained at a constant temperature. The temperature control system is a PID intelligent temperature control, reliable performance, easy to use.
Intelligent temperature regulators have over-temperature protection. If the temperature in the working chamber exceeds the set temperature during the operation of the device, the over-temperature protection circuit activates and the heating circuit is shut off.
The advantage of vacuum technology drying has the following advantages over conventional drying technology: Vacuum environment greatly reduces the boiling point of the liquid that needs to be removed, so vacuum drying can be easily applied to heat-sensitive substances;
â—† For samples that are not easily dried, such as powders or other granular samples, vacuum drying can effectively shorten the drying time;
â—† Various structurally complicated mechanical parts or other porous samples are cleaned and vacuum dried, leaving no residual material after drying;
â—† Use safer - In the vacuum or inert conditions, completely eliminate the possibility of oxide explosion in the heat;
â—† Compared with ordinary drying relying on air circulation, powdery samples cannot be blown or moved by moving air;
Control features: It has parameter memory protected by data loss due to power outage and dead status, and the call recovery function.
Performance characteristics:
-Using the first domestic streamline arc design, the shell is made of cold-rolled steel plate, and the surface is electrostatically sprayed;
- The temperature control system of this machine adopts microcomputer single chip technology, temperature control, timing, over temperature alarm;
- Displayed as dual-screen high-brightness digital tube display, indicating value is accurate and intuitive, superior performance, touch buttons to set the adjustment parameters;
- The temperature control sensor adopts the capacitor original imported part;
- Adopt imported motors and fan blades; with timing and timing functions;
- The inner liner is made of stainless steel; the semi-circular corners are easy to clean;
- The door can be completely loosened by the user and can be arbitrarily adjusted by the user. The integrally formed silicone rubber door seal ensures high vacuum inside the box.
- The cuboid structure of this studio is designed to maximize the effective volume. The door is made of toughened, bullet-proof double glass doors, which allows the user to see at a glance the items cultivated by the observation studio.

Printed Paper Card

Choosing the right paper for your printing project can make a huge impact on the final product. From final presentation to cost, paper stock is the core of your printed piece. Here are some tips for picking the right paper for different types of printed materials.
Brochures, sell sheets, maps, menus and flyers can all benefit from using the right paper for the job.

Printed Paper Card,Custom Cardstock Printing,Cardstock For Invitations,Cardstock Paper Printing

Shenyang Meitu Artical Printing Co.,Ltd , https://www.meituartical.com